- 论坛徽章:
- 0
|
升级ALOM版本时间不需要太长,前端时间,我给Sun 445升级了,还是远程升级的!\r\n\r\n升级ALOM版本:\r\nSection 2. Installing the ALOM Firmware From the Solaris OS \r\n-----------------------------------------------------------------------------\r\n\r\n1. Use the telnet, rlogin or ssh command through the network to log into the\r\n system as superuser.\r\n\r\n Caution: Do not attempt this procedure while logged into the system\r\n through the SERIAL MGT port.\r\n\r\n2. Change directories as follows:\r\n\r\n # cd /usr/platform/`uname -i`/lib\r\n\r\n3. If there is no images subdirectory, create one:\r\n\r\n # mkdir images\r\n\r\n4. Change to the images directory:\r\n\r\n # cd images\r\n\r\n5. Place this file in the images directory:\r\n\r\n ALOM_1.6.5_fw_hw8.tar.gz \r\n\r\n6. Unpack the tar file: gzcat ALOM_1.6.5_fw_hw8.tar.gz | tar xf -\r\n The following files will be created:\r\n README (this file)\r\n Legal/ (directory containing Licence, Entitlement and Third Party Readmes)\r\n copyright\r\n alomfw (firmware image file)\r\n\r\n7. Load the firmware image file alomfw into the System Controller hardware:\r\n\r\n # /usr/platform/`uname -i`/sbin/scadm download alomfw\r\n\r\n Approximately 120 seconds after the scadm utility completes, ALOM\r\n is available for use.\r\n\r\n8. Delete the tar file:\r\n\r\n # rm ALOM_1.6.5_fw_hw8.tar.gz\r\n\r\n\r\n\r\nbash-3.00# /usr/platform/SUNW,Sun-Fire-V445/sbin/scadm version\r\n\r\nSC 版本 v1.6\r\nSC Bootmon 版本: v1.6.5\r\nSC 固件版本: v1.6.5 |
|