免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
123下一页
最近访问板块 发新帖
查看: 9365 | 回复: 29
打印 上一主题 下一主题

关于boot cdrom后报错的问题 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2007-02-13 09:12 |只看该作者 |正序浏览
系统进入OK状态后,执行boot cdrom,报错如下:

Boot device: /pci@1f,0/ide@d/cdrom@1,0:f  File and args:
Can't read disk label.
Can't open disk label package

Can't open boot device

1、机器型号是blade 150,系统版本是solaris 9,机器没有鼠标和显示器,通过串口安装。
2、几天前用这套光盘,在这个机器上成功装过系统,所以光盘版本和机器是兼容的,光驱也是正常的,这几天没有动过机器,光驱线应该不会出问题吧。
3、现在把安装盘在另一台完全一样的机器上安装没有问题,所以此安装盘应该是好的。
4、怀疑光驱出问题了,把光驱拆下来,换上一个好光驱,仍然报同样的错误,所以应该不是光驱的问题。
5、在OK状态下执行probe-ide命令,结果如下:
   Device 0  ( Primary Master )
           ATA Model: WDC WD400BB-22DEA0

   Device 1  ( Primary Slave )
          Removable ATAPI Model: LTN486S

   Device 2  ( Secondary Master )
          Not Present

   Device 3  ( Secondary Slave )
          Not Present
6、在OK状态下执行devalias命令,结果如下:
   screen                   /pci@1f,0/SUNW,m64B@13
   cdrom2                   /pci@1f,0/ide@d/cdrom
   net                      /pci@1f,0/network@c,1
   cdrom2                   /pci@1f,0/ide@d/cdrom@2,0:f
   cdrom1                   /pci@1f,0/ide@d/cdrom@1,0:f
   cdrom                    /pci@1f,0/ide@d/cdrom@1,0:f
   disk                     /pci@1f,0/ide@d/disk@0,0
   disk3                    /pci@1f,0/ide@d/disk@3,0
   disk2                    /pci@1f,0/ide@d/disk@2,0
   disk1                    /pci@1f,0/ide@d/disk@1,0
   disk0                    /pci@1f,0/ide@d/disk@0,0
   ide                      /pci@1f,0/ide@d
   floppy                   /pci@1f,0/isa@7/dma/floppy
   ttyb                     /pci@1f,0/isa@7/serial@0,2e8
   ttya                     /pci@1f,0/isa@7/serial@0,3f8
   name                     aliases
7、在OK状态下执行set-defaults,然后reset-all,问题依旧。
8、我在网上查到这样一段话,如下:
   Thanks to Mike David Chanslor for helping me to fix my "Can't Read Disk Label" error.

   There were 2 problems:

   1.the system could not recognize the CD-ROM drive so we had to reconfigure
   the slave-master jumper settings.

   2.the cd-rom drive was faulty. it could not read properly from cd's, so we
   put in a a SONY CDROM drive and it ran smoothly. Below is how our
   correspondence went (later messages come first).

   我不太明白如何reconfigure the slave-master jumper settings。

以上信息供大家参考,谁帮我看看到底问题出在哪?该怎么解决(除了boot net)?不胜感激!

论坛徽章:
17
CU大牛徽章
日期:2013-03-13 15:32:352017金鸡报晓
日期:2017-02-08 10:33:21fulanqi
日期:2016-06-17 17:54:25lufei
日期:2016-06-17 17:38:40平安夜徽章
日期:2015-12-26 00:06:30冥斗士
日期:2015-11-25 14:38:112015年辞旧岁徽章
日期:2015-03-03 16:54:15亥猪
日期:2015-01-26 17:23:43CU大牛徽章
日期:2013-04-17 11:02:58CU大牛徽章
日期:2013-04-17 11:02:36CU大牛徽章
日期:2013-04-17 11:02:15CU大牛徽章
日期:2013-04-17 11:01:45
30 [报告]
发表于 2012-07-23 15:58 |只看该作者
好久没有搞SUN的机器了今天一台880和一台890都遇到这样的问题了,880只是用SOLARIS10启动成功一次,但是只能安装第一张盘,solaris9不能读,soaris8第一次成功之后不行了,折腾N次,换了N次盘,拷贝了N个版本的盘,咨询SUN工程师,派了原厂的工程师,升级eprom,最后终于宣告失败……………………

论坛徽章:
0
29 [报告]
发表于 2008-06-04 20:31 |只看该作者
敢问LZ,每次放光碟进去boot cdrom 之前有没有 reset-all 一下?

论坛徽章:
0
28 [报告]
发表于 2008-06-04 19:20 |只看该作者
我怕今天也遇到相同的问题了,而且没有楼主幸运,从来没有成功过,后来直接问我们头;可能是由于老服务器的原因,硬盘和光驱应使用一条线,光驱跳成sla,再引导成功了。大家可以试下

论坛徽章:
0
27 [报告]
发表于 2007-02-16 13:40 |只看该作者
原帖由 部落阿飞 于 2007-2-13 09:12 发表
系统进入OK状态后,执行boot cdrom,报错如下:

Boot device: /pci@1f,0/ide@d/cdrom@1,0:f  File and args:
Can't read disk label.
Can't open disk label package

Can't open boot device

1、机器型 ...



兄弟,我也看了下面一些兄弟给你的建议,但很多我觉得都不时对症下药,特别是小酷的“拍打疗法”很不建议使用,和你类似的情况我遇到过,通过你的描述我觉得有以下这种可能:(可能性90%)机器SCSI ID 冲突。
如果没有猜错,机器应该不是平白无故突然出现这种情况,肯定是换过什么硬件(比如光驱等)那么一定要注意机器跳线的问题,系统报Can't open boot device,不是系统有问题,而是此时机器根本找不到硬盘,而找不到硬盘,要么是硬盘松动,要么就是ID冲突。至于是那种你可以这样办:1.ok probe-scsi-all 看能否看到硬盘  2.重新拔插硬盘  3.如果换过硬件,则把跳线调整到更换前的 状态。不出意外 相信你做了上门的步骤应该就能起来了,如果有新问题,及时反馈 大家继续帮你想办法

论坛徽章:
0
26 [报告]
发表于 2007-02-16 11:31 |只看该作者
有些不是很正确的是否原因,多试几次也可能就好了。

实际与理论就是有差距!

论坛徽章:
0
25 [报告]
发表于 2007-02-14 10:44 |只看该作者
学习,这么好的经验.

论坛徽章:
0
24 [报告]
发表于 2007-02-14 10:27 |只看该作者
这种鬼问题多了,习惯了就好。上次给某blade2000机器(Sun F 280R)装sol8,安装到第二张cd死都不认,retry了10来次放弃了,想了想手动安装软件包,安到一半觉得这么弄的话可能有不少preinstall步骤没有做。遂换了一套盘重新安装,还是第二张不认,重试了好几次,遂对另外一哥们儿说行不行啊这光驱,他按了下enter,居然奇迹般的能装了。

论坛徽章:
0
23 [报告]
发表于 2007-02-13 17:32 |只看该作者
哈哈!原来是我对它太温柔了!

论坛徽章:
0
22 [报告]
发表于 2007-02-13 16:46 |只看该作者
你的问题我也遇到过一次,旧机器拍拍砸砸,重启几次,就可以引导起来了!!!
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f  File and args:
Can't read disk label.
Can't open disk label package

Can't open boot device

ok ___Data Access Error
ok boot cdrom
Initializing Memory \_
                                                                     
Initializing Memory /_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
                                                                     
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f  File and args:
Memory Address not Aligned
ok
ok devalias
net                      /pci@1f,0/pci@1,1/network@1,1
cdrom                    /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f
disk                     /pci@1f,0/pci@1,1/ide@3/disk@0,0
disk3                    /pci@1f,0/pci@1,1/ide@3/disk@3,0
disk2                    /pci@1f,0/pci@1,1/ide@3/disk@2,0
disk1                    /pci@1f,0/pci@1,1/ide@3/disk@1,0
disk0                    /pci@1f,0/pci@1,1/ide@3/disk@0,0
ide                      /pci@1f,0/pci@1,1/ide@3
floppy                   /pci@1f,0/pci@1,1/ebus@1/fdthree
ttyb                     /pci@1f,0/pci@1,1/ebus@1/se:b
ttya                     /pci@1f,0/pci@1,1/ebus@1/se:a
keyboard!                /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8:forcemode
keyboard                 /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
mouse                    /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
name                     aliases
ok boot /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f
Fast Data Access MMU Miss
ok __
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz), No Keyboard
OpenBoot 3.25, 128 MB (50 ns) memory installed, Serial #16631936.
Ethernet address 8:0:20:fd:c8:80, Host ID: 80fdc880.



Initializing Memory \_
                                                                     
Initializing Memory \_
                                                                     
Initializing Memory /_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
                                                                     
Boot device: disk  File and args:
The file just loaded does not appear to be executable.
ok
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f  File and args:
|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_|_/_-_\_|_/_-_\_|_/_-_Configuring /dev and /devices
\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_WARNING: simba-1: Simba fault log start:

WARNING: simba-1: primary err (42a0):

signalled system error.
WARNING: simba-1: sec err (380):

signalled parity error
simba-1: PCI fault log end.
WARNING: simba-0: Simba fault log start:

WARNING: simba-0: primary err (42a0):

signalled system error.
WARNING: simba-0: sec err (280):

simba-0: PCI fault log end.
WARNING: pcipsy-0: PCI fault log start:
PCI SERR
bytemask=c0
WARNING: pcipsy-0: PCI primary error (0):
WARNING: pcipsy-0: PCI secondary error (0):
WARNING: pcipsy-0: PBM AFAR 1fe.01020806:
WARNING: pcipsy0: PCI config space CSR=0x2a0
pcipsy-0: PCI fault log end.


panic[cpu0]/thread=30000228020: pcipsy-0: PCI bus 1 error(s)!


000002a100077ea0 pcipsy:pbm_error_intr+164 (30000115910, 7f0, 3000007a008, 3, 30000115910, 1)
  %l0-3: 0000030000089fb0 0000000000004000 0000030000131a58 fffffffffffffffe
  %l4-7: 0000030000133a50 000002a1002dce28 000000001049f030 0000000000000000
000002a100077f50 unix:current_thread+44 (0, 30000b1a83e, 101, 1049f030, 2a1002dcf0c, 2a1002dcf0
  %l0-3: 00000000100074b0 000002a1002dc511 000000000000000e 0000000000000016
  %l4-7: 0000000000000103 000002a1002dcfd5 0000000000000000 000002a1002dcdc0
000002a1002dce60 genunix:pci_config_get16+14 (300009b8a10, 3e, ffff, 1049f030, 0, 300000297b0)
  %l0-3: 0000030000029a00 0000000000000000 0000000000000001 0000000000000001
  %l4-7: 0000030000072d58 000003000021d190 000003000007bc08 0000000000000000
000002a1002dcf10 simba:simba_initchild+33c (1049ec00, 30000131a58, 1, 0, 10438380, 6e)
  %l0-3: 0000030000069878 00000000000025d0 0000000000000001 0000000000000000
  %l4-7: 00000000175ef718 0000000000000000 0000000000000000 00000000105ef718
000002a1002dd100 simba:simba_ctlops+a8 (30000133a50, 30000133a50, 1, 30000131a58, 0, 30000133a50)
  %l0-3: 00000000100be80c 0000000000000001 0000000000000000 0000000000000000
  %l4-7: 000002a100172000 000000001041b2d0 0000000010700660 000000001072b260
000002a1002dd1c0 unix:i_ddi_initchild+5c (30000131a58, 30000131a58, 30000133a50, 30000070000, 30000029680, 3000011c6a0)
  %l0-3: 0000030000029a00 0000000000000002 0000000000000000 000002a1000f7d20
  %l4-7: 000002a100174000 0000000000000005 000003000005cba0 0000000000000000
000002a1002dd270 genunix:ddi_initchild+28 (30000133a50, 30000131a58, 30000131a58, 3000011c6a0, 30000029a40, 300009b8a10)
  %l0-3: 0000030000029dc0 0000030000a0d820 0000000000008000 0000000000000000
  %l4-7: 0000000000000000 00000000104241a0 0000030000322988 0000000000000000
000002a1002dd320 unix:impl_initnode+c (30000131a58, 30000228020, 20, 300000f0788, 10438380, 73)
  %l0-3: 00000300000698a0 0000000000002788 0000000000000001 0000000000000000
  %l4-7: 0000000000000000 00000000104241a0 0000030000322d48 0000030000397ed0
000002a1002dd3d0 unix:impl_proto_to_cf2+90 (300000f07a0, 300000f0788, 73, 30000131a58, b0, 30000070000)
  %l0-3: 00000300009b8a10 0000000000000001 0000000000000000 0000000000000000
  %l4-7: 0000000000000000 0000000000000001 00000000ffbef8b0 00000000ff1bc008
000002a1002dd490 genunix:attach_driver_to_hw_nodes+a4 (30000131ac0, 0, 0, 10438380, 30000131a58, 0)
  %l0-3: 0000000000000073 0000000000002788 0000000000000000 0000000000000071
  %l4-7: 0000000000000000 0000000000000064 0000000000000000 000002a1002dd4a0
000002a1002dd540 genunix:ddi_hold_installed_driver+198 (7802da98, 300000f07a0, 300000f0788, 73, 7802da98, 300000f0640)
  %l0-3: 00000300000f0628 0000000000000000 0000000000000001 0000000000000001
  %l4-7: 0000030000072d58 000003000021d190 000003000007bc08 0000000000000000
000002a1002dd600 devinfo:di_hold_drivers+f0 (300009f4034, 1046b700, 1046d060, 3000007bc08, 1042eaf8, 10438380)
  %l0-3: 0000000000000020 0000000000000001 0000030000072d58 0000000000000000
  %l4-7: 0000000000000073 0000000000000000 00000000000001cc 0000000081010100
000002a1002dd6b0 devinfo:di_snapshot+34 (30000072d58, 300009f4034, 300009f4000, 30000072d58, 0, 0)
  %l0-3: 000000001000c438 00000000ff230638 0000000000705aac 00000000ff2002cc
  %l4-7: 0000000000000000 0000000000000000 000000007efefeff 0000000081010100
000002a1002dd760 devinfo:di_ioctl+4e4 (dc00, 40, 300009f4000, 2a1002ddaec, ffbef924, 30000072d5
  %l0-3: 0000000000000040 0000000000100001 0000000000000000 00000000ffbef808
  %l4-7: 0000000000705aac 00000000ff3e9068 00000000ff10923c 00000000ff3e7998
000002a1002dd830 genunix:cdev_ioctl+40 (5800000002, df27, ffbef924, 100001, 30000329f28, 2a1002ddaec)
  %l0-3: 0000000010327cec 0000000000000000 00000000ffbef808 00000000ffbef80c
  %l4-7: 00000000ff3816ad 0000000000000000 0000000000000000 00000000ff3e7998
000002a1002dd8e0 specfs:spec_ioctl+b0 (300008d7318, df27, ffbef924, 100001, 30000329f28, 2a1002ddaec)
  %l0-3: 0000030000202010 0000000000000004 00000000ff3e97c8 00000000ff386194
  %l4-7: 00000000ff19d00c 00000000ff1d11b0 00000000ff382a0c 0000000000000000
000002a1002dd9a0 genunix:ioctl+1e4 (300005b5c78, 4, ffbef924, 7efefeff, df27, ff00)
  %l0-3: 0000000010156518 00000000ff1bfad9 0000000000000000 0000000000000000
  %l4-7: 0000000000000000 0000000000000001 00000000ffbef8b0 00000000ff1bc008

syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetting ...

__
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz), No Keyboard
OpenBoot 3.25, 128 MB (50 ns) memory installed, Serial #16631936.
Ethernet address 8:0:20:fd:c8:80, Host ID: 80fdc880.



Initializing Memory \_
                                                                     
Initializing Memory \_
                                                                     
Initializing Memory /_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
                                                                     
Rebooting with command: boot
Boot device: disk  File and args:
The file just loaded does not appear to be executable.
Boot device: disk  File and args:
The file just loaded does not appear to be executable.
ok __
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz), No Keyboard
OpenBoot 3.25, 128 MB (50 ns) memory installed, Serial #16631936.
Ethernet address 8:0:20:fd:c8:80, Host ID: 80fdc880.



Initializing Memory \_
                                                                     
Initializing Memory \_
                                                                     
Initializing Memory /_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
                                                                     
Boot device: disk  File and args:

ok
ok
ok __
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 400MHz), No Keyboard
OpenBoot 3.25, 128 MB (50 ns) memory installed, Serial #16631936.
Ethernet address 8:0:20:fd:c8:80, Host ID: 80fdc880.



Initializing Memory \_
                                                                     
Initializing Memory /_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
                                                                     
Boot device: disk  File and args:
The file just loaded does not appear to be executable.
ok boot cdrom
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f  File and args:
|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_
SunOS Release 5.8 Version Generic_108528-29 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_|_/_-_\_|_/_-_\_|_/_
Configuring /dev and /devices
-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_-_\_|_Using RPC Bootparams for network configuration information.
/_-_\_|_/_-_\_|_/_-_SUNW,hme1 : No response from Ethernet network : Link down -- cable problem?
\_|_/_-_\_|_/_-_\_|_/_-_\_|_/_Skipping interface hme1
-_\_|_/_-_\_|_/_-_\_SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
|_/_-_\_|_/_-_\_|_/_SUNW,hme0 : No response from Ethernet network : Link down -- cable problem?
-_\_|_/_-_SUNW,hme0 : Internal Transceiver Selected.
SUNW,hme0 :   100 Mbps Full-Duplex Link Up
Skipping interface hme0
\_|_/_-_\_|_/_-_Searching for configuration file(s)...
























Select a Language

   0. English
   1. French
   2. German
   3. Italian
   4. Japanese
   5. Korean
   6. Simplified Chinese
   7. Spanish
   8. Swedish
   9. Traditional Chinese

Please make a choice (0 - 9), or press h or ? for help:
  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP