[已解决]RX7640单元板启不动，解决方法见19楼。

coologin

RX7640,CPU安装一个9150N在cell1上面，使用df查看
    C - Cell Board
    H - Cell Board Controller (PDHC)
    U - Cell Board Processor Module (PIROM)
    X - Cell Board Processor Module (FRU)
    Y - Cell Board Processor Power Module (PPM)

发现查看不到它： Cell Board Processor Power Module (PPM),   单元板的处理器电源模块？？？只 一块单元板，无法作交换测试。


怀疑固件问题，从HP的官网查到如下链接，但发现固件已是那个版本；于是怀疑CPU安装有问题，我后来安装了两个,在solt0,solt2上面，发现每次都是查看 Cell Board Processor Power Module (PPM)
http://bizsupport1.austin.hp.com ... x=1&mode=4&
http://hpuxbaby.blog.51cto.com/1755926/335844


This command displays the FRU ID information for the selected FRU.

    Do you want a specific FRU or a dump? ([S]/D) s

    B - Bulk Power Supply
    G - Management Processor (Core I/O)
    S - System Backplane
    P - PCI Backplane
    I - PCI Power Module
    M - Mass Storage Backplane
    L - LAN/SCSI card
    C - Cell Board
    H - Cell Board Controller (PDHC)
    U - Cell Board Processor Module (PIROM)
    X - Cell Board Processor Module (FRU)
    Y - Cell Board Processor Power Module (PPM)
    D - Cell Board Memory (DIMM)
        Select FRU : y
    Enter cell number: 1
    Enter the Processor Module number on the cell:

The Entity you have selected is Processor Power Module
ERROR: There has been an error getting FRU: RtnCodeBusBoyDevNotPresent

Error attempting to get FRU ID(s)




[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device:  

    MP MAIN MENU:

         CO: Consoles
        VFP: Virtual Front Panel
         CM: Command Menu
         CL: Console Logs
         SL: Show Logs
         FW: Firmware Update
         HE: Help
          X: Exit Connection

[mp00226410215d] MP> cm


                Enter HE to get a list of available commands

                      (Use ^B to return to main menu.)




[mp00226410215d] MP:CM> pc

This command controls power enable to a hardware device.

    T - Cabinet
    C - Cell
    P - IO Chassis
    R - Partition
        Select Device: c
    Enter cell number: 1

    The power state is ON for Cell 1.
    In what state do you want the power? (ON/OFF) on


Error attempting to power ON : RtnCodeCellSlotPowered

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: t

HW status for rx7640 cabinet : NO FAILURE DETECTED

Master/Slave failover is Enabled
Power switch is on
Right Door is closed
Top Door is closed
Left Door is closed

Total Power Available 7200 VA
Total Power Needed 1478 VA
Power Redundancy : redundant
Power Viability : viable


Power Status
---------------+-----+-----+-------+-----+
               |     |     |       |     |
               | Sys |     |  IO   |     |
               |Bkpln|Cells|Chassis| BPS |
               |     | 0 1 | 0   1 | 0 1 |
---------------+-----+-----+-------+-----+
Populated     |  *  |   * | *   * | * * |
Enabled       |  *  |   * | *   * | * * |
Power OK      |  *  |   * | *   * | * * |
Warning/Fault |     |     |       |     |
Attention LED |     |     |       |     |


AC Line status:
  Line A0 Present
  Line A1 Present
  Line B0 Present
  Line B1 Present

               -- Press <CR> to continue, or 'Q' to Quit --

Front Fan Speed   : normal
Rear Fan speed    : normal
I/O Bay Fan Speed : normal
Temperature state : normal
Main Fan Redundancy   : redundant
I/O Fan Redundancy    : redundant
Overtemp Shutdown Enabled


            | BPS |     PCI     |
            | Fans|     Fans    |
            | 0 1 | 0 1 2 3 4 5 |
+-----------+-----+-------------+
  Populated | * * | * * * * * * |
  Failing   |     |             |
  Failed    |     |             |

            | Standby/Main Fans |
            |                   |
            | 0 1 2 3           |
+-----------+-------------------+
  Populated | * * * *           |
  Failing   |                   |
  Failed    |                   |

            |  Cell Fans |
            |   CPU    C |
            | 0 1 2 3  C |
+-----------+------------+
Cell 1     |            |
  Populated | *   *    * |
  Failing   |            |
  Failed    |            |

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: s

HW status for System Backplane : No Fault Found

Global Power Monitor (GPM) version 001.002.000 is OK
Embedded Scan Ctrl (EMMUX) version 001.000.000 is OK

Backplane power is on, no fault

VRM's           0 1 2 3
Present      : * * * *        
Good         : * * * *        
Enabled      : * * * *        
OverTemp     :               

Master Clock Frequency is 266 MHz
Fabric Clock Frequency is 266 MHz

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: G

HW status for MP : No Fault Detected

Complex model string: 9000/800/rx7640

MP is not failed over

Cabinet LED is Green

Battery state is good

Last MP software reset occurred TUE AUG 03 02:33:44 2010

MP firmware rev B.004.001.001 built on Jun  4 2008 12:42:00

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: p
    Enter IO Chassis number: 1

HW status for IO Chassis 1 : No Fault Detected

Local Power Monitor (IO_LPM_E-0) version 002.003.000
Local Power Monitor (IO_LPM_E-1) version 002.003.000

Power is on, no fault
Power Module's   Brick 1  VRM 3  VRM 6
  Present      :   *        *      *
  Module Good  :   *        *      *
  Enabled      :   *        *      *
  Overtemp     :                    

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: p
    Enter IO Chassis number: 0

HW status for IO Chassis 0 : No Fault Detected

Local Power Monitor (IO_LPM_E-0) version 002.003.000
Local Power Monitor (IO_LPM_E-1) version 002.003.000

Power is on, no fault
Power Module's   Brick 0  VRM 1  VRM 2  VRM 5
  Present      :   *        *      *      *
  Module Good  :   *        *      *      *
  Enabled      :   *        *      *      *
  Overtemp     :                           

[mp00226410215d] MP:CM> ps

Display detailed status of the selected MP bus device.


The following MP bus devices were found:
+---+----+----+-----+-----+-------+-----+
|   |    |    |     |     |       |     |
|   |    |LAN\| Sys |     |  IO   |     |
|Cab| MP |SCSI|Bkpln|Cells|Chassis| BPS |
| # |M  S|0  1|     | 0 1 | 0   1 | 0 1 |
+---+----+----+-----+-----+-------+-----+
| 0 |*   |    |  *  |   * | *   * | * * |
+---+----+----+-----+-----+-------+-----+

You may display detailed power and hardware status for the following items:

    T - Cabinet
    S - System Backplane
    G - MP (Core I/O)
    P - IO Chassis
    C - Cell
        Select Device: c
    Enter cell number: 0

    ... Not a valid cell number ...

    Enter cell number: 1

HW status for Cell 1 : FAILURE DETECTED

Power status : on, no fault
Faults above are latched. They are cleared just before the cell is powered on.
Boot is blocked
PDH memory is shared
Processor Compatibility : OK
RIO cable status : connected
RIO cable connection physical location : PCI Domain 1
Core cell is INVALID
Attention Led is off

PDHC status Leds :  -***

CPU Module Slot    0 1 2 3
Populated         P   P  
Local 48V Good    *   *  
Power Enabled     *   *  
Power Good        *   *  
   (* - True, P - Processor, T - Terminator)

|       DIMM Presence       |
|                           |
|   Side: |    A   |    B   |
|Echelon: |01234567|01234567|
+---------+--------+--------+
|         |****     ****    |
                                    1 1 1 1 1 1
VRM's           0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
Present      : * * * * * * * * * * * * * * * *
Enabled      : * * * * * * * * * * * * * * * *
Pwr Good     : * * * * * * * * * * * * * * * *

Front Side Bus Freq.    : 267 MHz
CPU Core Freq.          : 1600 MHz
CPU Part Number         : 80567KE

System Boot Rom (SFW) firmware rev 009.048.000
PDH controller (PDHC) firmware rev B.023.003.040 built SUN AUG 05 21:53:18 2007

[mp00226410215d] MP:CM>

[mp00226410215d] MP:CM> pc

This command controls power enable to a hardware device.

    T - Cabinet
    C - Cell
    P - IO Chassis
    R - Partition
        Select Device: t

    The power state is OFF for Cabinet 0.
    In what state do you want the power? (ON/OFF) on
[mp00226410215d] MP:CM> pc

This command controls power enable to a hardware device.

    T - Cabinet
    C - Cell
    P - IO Chassis
    R - Partition
        Select Device: c
    Enter cell number: 1

    The power state is ON for Cell 1.
    In what state do you want the power? (ON/OFF) on


Error attempting to power ON : RtnCodeCellSlotPowered

[mp00226410215d] MP:CM>



[mp00226410215d] MP:CM> ^df

This command displays the FRU ID information for the selected FRU.

    Do you want a specific FRU or a dump? ([S]/D) s

    B - Bulk Power Supply
    G - Management Processor (Core I/O)
    S - System Backplane
    P - PCI Backplane
    I - PCI Power Module
    M - Mass Storage Backplane
    L - LAN/SCSI card
    C - Cell Board
    H - Cell Board Controller (PDHC)
    U - Cell Board Processor Module (PIROM)
    X - Cell Board Processor Module (FRU)
    Y - Cell Board Processor Power Module (PPM)
    D - Cell Board Memory (DIMM)
        Select FRU : u
    Enter cell number: 1
    Enter the Processor Module number on the cell:

The Entity you have selected is Processor Module (Pirom)
Data Format Revision           : 0
EEPROM Size                    : 128
S-spec/QDF Number              : LAB6
Sample/Production              : 1
Processor Architecture Rev.    : 0
Processor Core Family          : 32
Processor Core Model           : 1
Processor Core Stepping        : 1
MAX Core Frequency             : 1600 MHz
MAX Bus Frequency              : 267 MHz
Core Voltage ID                : 1150 mV
Core Volt. Tol High            : +64 mV
Core Volt. Tol Low             : -3f mV
Cache Size                     : 6000 Kbytes
Package Rev.                   : NE
Substrate Rev.                 : 1
Processor Part Number          : 80567KE
Processor Serial Number        : 0002D23438918F9C
Thermal Ref. Byte              : 92
Processor Core Feature Flags   : 0xFFFB8743
Package Core Feature Flags     : 0x3F010000
TAP chain device count         : 2
[mp00226410215d] MP:CM>

[mp00226410215d] MP:CM> df

This command displays the FRU ID information for the selected FRU.

    Do you want a specific FRU or a dump? ([S]/D) s

    B - Bulk Power Supply
    G - Management Processor (Core I/O)
    S - System Backplane
    P - PCI Backplane
    I - PCI Power Module
    M - Mass Storage Backplane
    L - LAN/SCSI card
    C - Cell Board
    H - Cell Board Controller (PDHC)
    U - Cell Board Processor Module (PIROM)
    X - Cell Board Processor Module (FRU)
    Y - Cell Board Processor Power Module (PPM)
    D - Cell Board Memory (DIMM)
        Select FRU : x
    Enter cell number:

    ... Not a valid cell number ...

    Enter cell number: 1
    Enter the Processor Module number on the cell:

The Entity you have selected is Processor Module
FRU ID Definition Revision     : B
Artwork Revision               :   
Engineering Date Code          : 4802
Part Number                    : AD368-2102B
Serial Number                  : PR108377VD  
FRU Name                       : MTV_A1_1624     
Scan Revision                  : 0x1
FRU Specific Information       : 2H64010B2b82   
Manufacturing and Test History :
Field 0 0xffffffffffff000000
Field 1 0xb02208100201000000
Field 2 0x000000000a00000000
Field 3 0xffffffffffff000000
Field 4 0xffffffffffff000000
Field 5 0x000000000000000000
Field Spare 0x0000
[mp00226410215d] MP:CM>

Field Spare 0x0000
[mp00226410215d] MP:CM> df

This command displays the FRU ID information for the selected FRU.

    Do you want a specific FRU or a dump? ([S]/D) s

    B - Bulk Power Supply
    G - Management Processor (Core I/O)
    S - System Backplane
    P - PCI Backplane
    I - PCI Power Module
    M - Mass Storage Backplane
    L - LAN/SCSI card
    C - Cell Board
    H - Cell Board Controller (PDHC)
    U - Cell Board Processor Module (PIROM)
    X - Cell Board Processor Module (FRU)
    Y - Cell Board Processor Power Module (PPM)
    D - Cell Board Memory (DIMM)
        Select FRU : y
    Enter cell number: 1
    Enter the Processor Module number on the cell:

The Entity you have selected is Processor Power Module
ERROR: There has been an error getting FRU: RtnCodeBusBoyDevNotPresent

Error attempting to get FRU ID(s)

[mp00226410215d] MP:CM>

coologin

提示core IO没有，查看RX7640的平面图，没有指出core IO是哪个部件？是否影响？？——强烈


[mp00226410215d] MP:CM> sysrev

    Cabinet firmware revision report

PROGRAMMABLE HARDWARE :

System Backplane :    GPM         EMMUX
                  -----------  -----------
                  001.002.000  001.000.000

IO Backplane     : IO_LPM_E-0   IO_LPM_E-1
                  -----------  -----------
                  002.003.000  002.003.000

Core IO          :   CIO-0        CIO-1
                  -----------  -----------
                  000.000.000  001.002.000

                    CELL_LPM    CELL_JTAG     CELL_PDH
                  -----------  -----------  -----------
Cell 0 :          000.000.000  000.000.000  000.000.000 - not installed
Cell 1 :          001.002.000  001.002.000  001.005.001

FIRMWARE:

Core IO
  MP-0          :  B.000.000.000 - not installed
  ED-0          :    000.000.000
  MP-1          :  B.004.001.001
  ED-1          :    002.011.000

Cell 0 - not installed
  PDHC          :  B.000.000.000
  PDHC          :  B.000.000.000
                :    000.000.000         
                :    000.000.000         
Cell 1
  PDHC          :  B.023.003.040 - Active
  PDHC          :  B.023.003.040         
  IPF_FW        :    009.048.000 - Active
  IPF_FW        :    009.048.000         
       

lbseraph

rx7640 core I/O的MP是在slot 1的，把SEL中alert 3以上的event贴出来看看。

coologin

日志信息不多，
都是warnning,看最后一条，

[mp00226410215d] MP> sl

    EVENT LOG MENU:

        FPL: Forward Progress Log
        SEL: System Event Log
       LIVE: Live Events
       MPEL: MP Event Log

        CLR: Clear FPL and SEL
          Q: Quit

[mp00226410215d] MP:VW>  sel


             Welcome to the SEL (System Event Log) Viewer

   The following SEL navigation commands are available:
         D: Dump log starting at current block for capture and analysis
         F: Display first (oldest) block
         L: Display last (newest) block
         J: Jump to specified entry and display previous block
         +: Display next (forward in time) block
         -: Display previous (backward in time) block
      <cr>: Repeat previous +/- command
      <sp>: Repeat previous +/- command
         ?: Display help
        ^B: Exit viewer

   The following event format options are available:
         K: Keyword
         R: Raw hex
         T: Text

   The following event filter options are available:
         A: Alert level
         C: Cell
         U: Unfiltered
[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d] T
Switching to text format.
[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d] a

   Alert Level Filter:
     0: Minor Forward Progress
     1: Major Forward Progress
     2: Informational
     3: Warning
     5: Critical
     7: Fatal
     Q: Quit

For example, selecting an alert level threshold of 3
selects all events with alert levels of 3 or higher.

Please select alert level threshold:  3
Switching to alert level 3 filter.
[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3177:    11/28/2012 14:21:53
Alert level 3:  Warning
Keyword:  AC_DELETED_B0
Power has been removed from AC input B0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114300e00155 0x00ffffffffffff41
0x6b00114300e00156 0x0100000050b61e01

Log Entry 3175:    11/28/2012 14:21:52
Alert level 3:  Warning
Keyword:  AC_DELETED_A0
Power has been removed from AC input A0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114100e00151 0x00ffffffffffff41
0x6b00114100e00152 0x0100000050b61e00






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3155:    11/28/2012 13:47:01
Alert level 3:  Warning
Keyword:  AC_DELETED_A1
Power has been removed from AC input A1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114200e00129 0x00ffffffffffff41
0x6b00114200e0012a 0x0100000050b615d5

Log Entry 3152:    11/28/2012 13:46:59
Alert level 7:  Fatal
Keyword:  HKP_UNDERVOLTAGE
Housekeeping power has fallen below expected levels.
Reporting Entity:  Power Monitor located in cabinet 0
0xeb000b0700e00124 0x0100000050b615d3








[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3151:    11/28/2012 13:46:59
Alert level 3:  Warning
Keyword:  AC_DELETED_B0
Power has been removed from AC input B0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114300e00122 0x00ffffffffffff41
0x6b00114300e00123 0x0100000050b615d3

Log Entry 3150:    11/28/2012 13:46:58
Alert level 3:  Warning
Keyword:  AC_DELETED_B1
Power has been removed from AC input B1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114400e00120 0x00ffffffffffff41
0x6b00114400e00121 0x0100000050b615d2






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3137:    11/28/2012 12:57:47
Alert level 3:  Warning
Keyword:  CELL_LEFT_LATCH_OPEN
The left cell latch is open.
Reporting Entity:  Processor Dependent Hardware Controller located in cabinet 0, slot 1
Physical Location:  Cell board cabinet 0 cell 1
0x648013c401e00106 0x00ffff01ffffff94
0x6b0013c401e00107 0x0100000050b60a4b

Log Entry 3136:    11/28/2012 12:57:47
Alert level 3:  Warning
Keyword:  CELL_RIGHT_LATCH_OPEN
The right cell latch is open
Reporting Entity:  Processor Dependent Hardware Controller located in cabinet 0, slot 1
Physical Location:  Cell board cabinet 0 cell 1
0x648013c501e00104 0x00ffff01ffffff94
0x6b0013c501e00105 0x0100000050b60a4b






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3117:    11/28/2012 12:54:48
Alert level 3:  Warning
Keyword:  CELL_RIGHT_LATCH_OPEN
The right cell latch is open
Reporting Entity:  Processor Dependent Hardware Controller located in cabinet 0, slot 1
Physical Location:  Cell board cabinet 0 cell 1
0x648013c501e000de 0x00ffff01ffffff94
0x6b0013c501e000df 0x0100000050b60998

Log Entry 3116:    11/28/2012 12:54:48
Alert level 3:  Warning
Keyword:  CELL_LEFT_LATCH_OPEN
The left cell latch is open.
Reporting Entity:  Processor Dependent Hardware Controller located in cabinet 0, slot 1
Physical Location:  Cell board cabinet 0 cell 1
0x648013c401e000dc 0x00ffff01ffffff94
0x6b0013c401e000dd 0x0100000050b60998






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3115:    11/28/2012 12:44:20
Alert level 3:  Warning
Keyword:  AC_DELETED_A1
Power has been removed from AC input A1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114200e000da 0x00ffffffffffff41
0x6b00114200e000db 0x0100000050b60724

Log Entry 3113:    11/28/2012 12:44:19
Alert level 7:  Fatal
Keyword:  HKP_UNDERVOLTAGE
Housekeeping power has fallen below expected levels.
Reporting Entity:  Power Monitor located in cabinet 0
0xeb000b0700e000d7 0x0100000050b60723








[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3112:    11/28/2012 12:44:19
Alert level 3:  Warning
Keyword:  AC_DELETED_B0
Power has been removed from AC input B0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114300e000d5 0x00ffffffffffff41
0x6b00114300e000d6 0x0100000050b60723

Log Entry 3111:    11/28/2012 12:44:18
Alert level 3:  Warning
Keyword:  AC_DELETED_B1
Power has been removed from AC input B1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114400e000d3 0x00ffffffffffff41
0x6b00114400e000d4 0x0100000050b60722






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3073:    11/28/2012 11:59:30
Alert level 3:  Warning
Keyword:  AC_DELETED_A1
Power has been removed from AC input A1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114200e00087 0x00ffffffffffff41
0x6b00114200e00088 0x0100000050b5fca2

Log Entry 3069:    11/28/2012 11:59:29
Alert level 7:  Fatal
Keyword:  HKP_UNDERVOLTAGE
Housekeeping power has fallen below expected levels.
Reporting Entity:  Power Monitor located in cabinet 0
0xeb000b0700e00080 0x0100000050b5fca1








[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3068:    11/28/2012 11:59:29
Alert level 3:  Warning
Keyword:  AC_DELETED_B0
Power has been removed from AC input B0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114300e0007e 0x00ffffffffffff41
0x6b00114300e0007f 0x0100000050b5fca1

Log Entry 3067:    11/28/2012 11:59:27
Alert level 3:  Warning
Keyword:  AC_DELETED_B1
Power has been removed from AC input B1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114400e0007c 0x00ffffffffffff41
0x6b00114400e0007d 0x0100000050b5fc9f






[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3031:    11/28/2012 11:54:07
Alert level 3:  Warning
Keyword:  AC_DELETED_B0
Power has been removed from AC input B0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114300e00034 0x00ffffffffffff41
0x6b00114300e00035 0x0100000050b5fb5f

Log Entry 3029:    11/28/2012 11:54:06
Alert level 7:  Fatal
Keyword:  HKP_UNDERVOLTAGE
Housekeeping power has fallen below expected levels.
Reporting Entity:  Power Monitor located in cabinet 0
0xeb000b0700e00031 0x0100000050b5fb5e








[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
Log Entry 3028:    11/28/2012 11:54:06
Alert level 3:  Warning
Keyword:  AC_DELETED_A1
Power has been removed from AC input A1.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114200e0002f 0x00ffffffffffff41
0x6b00114200e00030 0x0100000050b5fb5e

Log Entry 3027:    11/28/2012 11:54:05
Alert level 3:  Warning
Keyword:  AC_DELETED_A0
Power has been removed from AC input A0.
Reporting Entity:  Management Processor located in cabinet 0
Physical Location:  AC mains cabinet 0
0x6480114100e0002d 0x00ffffffffffff41
0x6b00114100e0002e 0x0100000050b5fb5d

******************** Beginning of log ********************




[mp00226410215d] MP:VWR (<cr>,<sp>,+,-,?,F,L,J,D,K,R,T,A,C,U,^B) > [mp00226410215d]  
******************** Beginning of log ********************

lbseraph

上面这些SEL都是些插拔电源线的记录而已，看不出来有其他硬件问题。这是新机器还是之前用过的？新机器的话有没有创建过partition了？有的话给cell 1加电后console有没有输出？

coologin

回复 5# lbseraph


    这是老机器，有没有创建 分区我都不知道。也是一台测试机。所以不所谓数据保护。

coologin

core IO not install,和这条有没有关系，我只有一块MP卡？


Core IO
   MP-0          :  B.000.000.000 - not installed

chinadns

    The power state is ON for Cell 1.
    In what state do you want the power? (ON/OFF) on


Error attempting to power ON : RtnCodeCellSlotPowered

已经是ON了，还poweron？

VFP啥情况，启动到哪步了，console没输出吗

yuruio

coologin 发表于 2012-11-29 17:02
core IO not install,和这条有没有关系，我只有一块MP卡？

Core IO
  MP-0          :  B.000.000.000 - not installed
  ED-0          :    000.000.000
  MP-1          :  B.004.001.001
  ED-1          :    002.011.000

一个npar的话，rx7640 core I/O的MP是在slot 1的。所以跟这个没关系的。.
vfp是什么输出呢.?
cm>cp 查看下分区.  测试机的话,那你重新建下分区. cm>cc  试试. ?

coologin

现在加了一块cell板，每块板是一个CPU，4条内存，


[mp00226410215d] MP:CM> sysrev

    Cabinet firmware revision report

PROGRAMMABLE HARDWARE :

System Backplane :    GPM         EMMUX
                  -----------  -----------
                  001.002.000  001.000.000

IO Backplane     : IO_LPM_E-0   IO_LPM_E-1
                  -----------  -----------
                  002.003.000  002.003.000

Core IO          :   CIO-0        CIO-1
                  -----------  -----------
                  000.000.000  001.002.000

                    CELL_LPM    CELL_JTAG     CELL_PDH
                  -----------  -----------  -----------
Cell 0 :          001.002.000  001.002.000  001.005.001
Cell 1 :          001.002.000  001.002.000  001.005.001

FIRMWARE:

Core IO
  MP-0          :  B.000.000.000 - not installed
  ED-0          :    000.000.000
  MP-1          :  B.004.001.001
  ED-1          :    002.011.000

Cell 0
  PDHC          :  B.023.003.040 - Active
  PDHC          :  B.023.003.040         
  IPF_FW        :    009.048.000 - Active
  IPF_FW        :    009.048.000         
Cell 1
  PDHC          :  B.023.003.040 - Active
  PDHC          :  B.023.003.040         
  IPF_FW        :    007.044.000         
  IPF_FW        :    009.022.000 - Active



我尝试了cc,查看了vfp

#  Partition state               Activity
  -  ---------------               --------
  0                                                                     0 Logs

  #  Cell state                    Activity
  -  ----------                    --------
  1  Power on                                                           0 Logs