- 论坛徽章:
- 0
|
问题如下
smitty ssaraid
List All Defined SSA RAID Arrays
Command: OK stdout: yes stderr: no
Before command completion, additional instructions may appear below.
F1=Help F2=Refresh F3=Cancel F6=Command F8=Image
F9=Shell F10=Exit /=Find n=Find Next
该阵列为HA双机共享阵列
操作系统433,基本上所有的 阵列信息都看不到了
diag诊断ssa卡报错
The Service Request Number(s)/Probable Cause(s)
(causes are listed in descending order of probability):
46000: Use the Service Guide for your SSA Adapter or SSA Subsystem.
SSA-SUBSYSTEM U0.1-P1-I1/Q1
关于46000的解释
46000
Description: An array is in the Offline state because not enough disk
drives are present in the array to maintain data availability.
Action: If the SSA service aids are available, run the Link Verification
service aid (see “Link Verification Service Aid” on page 383) to find power
faults or broken SSA links that might be causing this problem.
If the SSA service aids are not available, or the problem remains, go to
“MAP 2324: SSA RAID” on page 454 to isolate the problem.
For a RAID-0 or a RAID-Copy array, at least one member disk drive of the
array is missing.
For a RAID-5 array, at least two member disk drives cannot be accessed.
For a RAID-10 array, at least one mirrored pair of disk drives cannot be accessed.
Power problem.
System configuration problem. |
|