论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2012-03-02 10:55 |只看该作者 |倒序浏览

我这里有两台EMC DS-32B2 Switch，现在接几台PC 服务器，插上光纤线，状态变成

DS_32B2_B login: admin
Password:
DS_32B2_B:admin> switchshow
switchName:    DS_32B2_B
switchType:    12.4
switchState: Online
switchMode:    Native
switchRole:    Principal
switchDomain: 102
switchId:    fffc66
switchWwn:    10:00:00:60:69:90:1b:42
zoning:       ON (erp_config_B)
switchBeacon: OFF

Area Port Media Speed State
==============================
  0 0 id N2 Online F-Port  50:01:43:80:02:5d:a6:c9
  1 1 id N2 Online F-Port  50:01:43:80:02:5d:a6:cd
  2 2 id N2 No_Light
  3 3 id N2 No_Light  Disabled (Switch not ready for F or L ports)
  4 4 id N2 Online F-Port  50:01:43:80:00:c3:0a:a2
  5 5 id N2 Online F-Port  50:01:43:80:00:c3:0a:36
  6 6 id N2 Online F-Port  50:01:43:80:00:c3:0a:74
  7 7 id N2 Online F-Port  50:01:43:80:00:c3:0b:2c
  8 8 id N2 No_Light
  9 9 id N2 No_Light
10  10 id N2 No_Light
11  11 id N2 No_Light
12  12 id N2 No_Light
13  13 id N2 No_Light
14  14 id N2 No_Light
15  15 id N2 No_Light
16  16 id N2 No_Light  Disabled (Switch not ready for F or L ports)
17  17 id N2 Online F-Port  50:06:01:61:10:60:18:62
18  18 id N2 Online F-Port  50:06:01:6a:10:60:18:62
19  19 id N2 No_Light  Disabled (Switch not ready for F or L ports)
20  20 id N2 No_Light  Disabled (Switch not ready for F or L ports)
21  21 id N2 No_Light  Disabled (Switch not ready for F or L ports)
22  22 id N2 No_Light  Disabled (Switch not ready for F or L ports)
23  23 id N2 No_Light  Disabled (Switch not ready for F or L ports)
24  24 id N2 No_Light  Disabled (Switch not ready for F or L ports)
25  25 id N2 No_Light  Disabled (Switch not ready for F or L ports)
26  26 id N2 No_Light
27  27 id N2 No_Light
28  28 id N2 No_Light
29  29 id N2 No_Light
30  30 id N2 No_Light
31  31 -- N2 No_Module
端口是16、19~25都变成黄灯闪烁，拔下光纤线，端口无光，将光纤线都拔掉，重新portenabe，端口又正常了，插上光纤线做portenable动作，没有反应，黄灯依旧闪烁，换4G模块，故障依旧，此交换机上还有别的服务器，也正常。这是昨天操作的，今天也没有动原来的端口，后来过30分钟发现端口3也出现同样的现象，旁边的4号也出现同样的现象，没有拔掉4号端口，请各位高手帮忙，谢谢