- 论坛徽章:
- 0
|
本帖最后由 harry20112011 于 2011-03-17 22:42 编辑
【成都】便宜出售44p170 可以安装AIX5.3,支持64位
限成都地区的朋友交易!价格便宜~
下面是配置信息,需要的朋友请M
机器型号:IBM,7044-170
CPU:PowerPC_POWER3 333 MHz 64-bit
内存:512M
磁盘:共18G 2个 16 Bit SCSI Disk Drive (9100 MB)
网卡:10/100M
光驱:cdrom
软驱:有
显卡:无,可以使用串口登陆和安装系统
送串口线(我自己电脑城请人家做的)
送AIX5.3安装光盘3张
IP:192.168.1.150
机器已安装AIX5.3
下面是prtconf信息
-bash-3.2# prtconf
System Model: IBM,7044-170
Machine Serial Number: 10B67CD
Processor Type: PowerPC_POWER3
Number Of Processors: 1
Processor Clock Speed: 333 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: -1 NULL
Memory Size: 512 MB
Good Memory Size: 512 MB
Platform Firmware level: Not Available
Firmware Version: IBM,SPH01316
Console Login: enable
Auto Restart: true
Full Core: false
Network Information
Host Name: newname
IP Address: 192.168.1.150
Sub Netmask: 255.255.255.0
Gateway: 192.168.1.1
Name Server:
Domain Name:
Paging Space Information
Total Paging Space: 1124MB
Percent Used: 1%
Volume Groups Information
==============================================================================
rootvg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk0 active 542 137 00..00..00..50..87
==============================================================================
datavg:
PV_NAME PV STATE TOTAL PPs FREE PPs FREE DISTRIBUTION
hdisk1 active 8676 4991 1736..00..100..1420..1735
==============================================================================
INSTALLED RESOURCE LIST
The following resources are installed on the machine.
+/- = Added or deleted from Resource List.
* = Diagnostic support not available.
Model Architecture: chrp
Model Implementation: Uni-Processor, PCI bus
+ sys0 System Object
+ sysplanar0 System Planar
* pci1 P1 PCI Bus
* pci0 P1 PCI Bus
* isa0 P1 ISA Bus
+ fda0 P1/D1 Standard I/O Diskette Adapter
+ fd0 P1-D1 Diskette Drive
* siokma0 P1/K1 Keyboard/Mouse Adapter
+ sioka0 P1/K1 Keyboard Adapter
+ sioma0 P1/K1 Mouse Adapter
+ siota0 P1/Q1 Tablet Adapter
+ paud0 P1/Q2 Ultimedia Integrated Audio
+ ppa0 P1/R1 CHRP IEEE1284 (ECP) Parallel Port Adapter
+ sa0 P1/S1 Standard I/O Serial Port
+ tty0 P1/S1-L0 Asynchronous Terminal
+ sa1 P1/S2 Standard I/O Serial Port
+ scsi0 P1/Z1 Wide/Ultra-2 SCSI I/O Controller
+ hdisk0 P1/Z1-A0 16 Bit SCSI Disk Drive (9100 MB)
+ cd0 P1/Z1-A1 SCSI Multimedia CD-ROM Drive (650 MB)
+ hdisk1 P1/Z1-A4 16 Bit LVD SCSI Disk Drive (9100 MB)
+ scsi1 P1/Z2 Wide/Ultra-2 SCSI I/O Controller
+ ent0 P1/E1 IBM 10/100 Mbps Ethernet PCI Adapter (23100020)
+ L2cache0 L2 Cache
+ mem0 Memory
+ proc0 P1-C1 Processor
磁盘:
bash-3.2# lsattr -El hdisk0
PCM PCM/friend/scsiscsd Path Control Module False
algorithm fail_over Algorithm True
dist_err_pcnt 0 Distributed Error Percentage True
dist_tw_width 50 Distributed Error Sample Time True
hcheck_interval 0 Health Check Interval True
hcheck_mode nonactive Health Check Mode True
max_transfer 0x40000 Maximum TRANSFER Size True
pvid 000b68bdfd9cb29b0000000000000000 Physical volume identifier False
queue_depth 3 Queue DEPTH False
reserve_policy single_path Reserve Policy True
size_in_mb 9100 Size in Megabytes False
^[[Abash-3.2# lsattr -El hdisk1
PCM PCM/friend/scsiscsd Path Control Module False
algorithm fail_over Algorithm True
dist_err_pcnt 0 Distributed Error Percentage True
dist_tw_width 50 Distributed Error Sample Time True
hcheck_interval 0 Health Check Interval True
hcheck_mode nonactive Health Check Mode True
max_transfer 0x40000 Maximum TRANSFER Size True
pvid 000b67cd38bd66770000000000000000 Physical volume identifier False
queue_depth 3 Queue DEPTH False
reserve_policy single_path Reserve Policy True
size_in_mb 9100 Size in Megabytes False
bash-3.2#
-bash-3.2# df -k
Filesystem 1024-blocks Free %Used Iused %Iused Mounted on
/dev/hd4 16384 3016 82% 1731 68% /
/dev/hd2 1343488 25280 99% 31239 79% /usr
/dev/hd9var 16384 3432 80% 412 32% /var
/dev/hd3 409600 407348 1% 42 1% /tmp
/dev/hd1 16384 15968 3% 17 1% /home
/proc - - - - - /proc
/dev/hd10opt 65536 7388 89% 1179 39% /opt
/dev/oralv 4194304 469920 89% 16834 14% /ora
-bash-3.2# oslevel
5.3.0.0
-bash-3.2# oslevel -g
Fileset Actual Level Maintenance Level
-----------------------------------------------------------------------------
bos.rte 5.3.0.60 5.3.0.0
-bash-3.2# oslevel -r
5300-06 |
|