- 论坛徽章:
- 0
|
现在我遇到如下问题:
开始:Sun Netra T1 Ac200 的 fault led
灯长亮,网卡等也不闪,我想用超级终端直接通过serial A/Lom
Port连上去看看,可什么提示符也没有(同样型号的机器,同样连接,敲回车出现login提示符。我就只能把了电源。
接着:重新上电,黄灯(fault
led)又闪了两下,好像风扇也转了,以后就没反应了。连上去的终端显示:
LOMlite starting up.
CPU type: H8/3437s, mode 3
Ram-test:2.48 bytes OK
Initialising i2c bus : OK
Searching for EEPROMs:50(cfg)
I2c eeprom @50: OK
i2c bus speed code 01 ... OK
Probving for lm80s:28
Initialising lm80 @28:OK
Probing for lm75s:none
System functionsSUs fans breakers rails gpio temps host CLI
ebus clock
Power restored
LOMlite console
lom >
LOMevent: +0h0m0s LOM booted
lom>
在提示符后,我什么都不能输入,机器就这样停着。
|
|