- 论坛徽章:
- 0
|
20可用积分
两台IBM P595挂的EMC存储,系统版本是5300-08,hacmp 是5.4.1 ,安装了EMC 的多路径软件powerpath,PV路径是hdiskpower0。。。hdiskpower20
原先建的共享卷组我感觉PP大小不合适,就用执行SMIT 选择 REMOVE选项把卷组给删除了,删除以后,我重新建卷组,建完以后,执行extendvg添加其他PV报以下错误:
Before command completion, additional instructions may appear below.
mkvg: This concurrent capable volume group must be varied on manually.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
我在另外一个节点导入卷组,导入失败,仍然报
Before command completion, additional instructions may appear below.
mkvg: This concurrent capable volume group must be varied on manually.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
我再次执行SMIT 选择 REMOVE选项把卷组删了,把HACMP 也给停了,重新启动了系统,再次执行创建卷组,这一次,连卷组都创建不了了,直接报:
Before command completion, additional instructions may appear below.
mkvg: This concurrent capable volume group must be varied on manually.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
0516-050 mkvg: Not enough descriptor area space left in this volume
group. Either try adding a smaller PV or use another volume group.
给IBM 800打电话咨询也没解决掉,有谁知道怎么解决,谢谢 |
|