- 论坛徽章:
- 0
|
各位,我配置了一个拨号服务器,机器拨号上来能自动分配了IP地址,但是拨号上来的机器确和我网内的机器不能连接,就连我 ping 我的E0/0口,都不通。请问这是为什么,帮我看一下配置,谢谢!
cisco#show run
Building configuration...
Current configuration : 1366 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname cisco
!
enable secret 5 $1$x2xn$3MN/eEiYnkCIh6YJ8bAzD.
enable password cisco
!
username hscin password 0 cisco
memory-size iomem 10
ip subnet-zero
no ip routing
!
!
no ip domain-lookup
!
!
!
!
interface FastEthernet0/0
ip address 172.117.108.1 255.255.255.0
no ip mroute-cache
duplex auto
speed auto
!
interface Serial0/0
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface FastEthernet0/1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
speed auto
half-duplex
!
interface Serial0/1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Group-Async1
description connected to Dial-inPCs
ip unnumbered FastEthernet0/0
encapsulation ppp
async dynamic address
async mode interactive
peer default ip address pool sxpool
ppp authentication chap
group-range 33 40
!
ip local pool sxpool 172.117.108.21 172.117.108.28
ip classless
no ip http server
ip pim bidir-enable
!
!
snmp-server community public RO
!
line con 0
exec-timeout 0 0
password jzcin
login
line 33 40
login local
modem InOut
modem autoconfigure discovery
transport input all
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware
line aux 0
line vty 0 4
password cisco
login
!
!
end
cisco# |
|