- 论坛徽章:
- 0
|
大家好,我使用linux机器配置了一个网桥。现在就是网桥两边的机器互相ping丢包都高达45%左右。
我配置过程大概就是这样的:
- # ifconfig eth1 0.0.0.0
- # ifconfig eth2 0.0.0.0
- # brctl addbr BR_192
- # brctl addif BR_192 eth1
- # brctl addif BR_192 eth2
- # ifconfig BR_192 192.168.1.2
复制代码
现在连接在eth1后面交换机和连接在eth2交换机后面的机器互相ping,丢包高达45%左右。
大家有没有这方面的经验和建议来解决这个问题,谢谢!
- Usage: brctl [commands]
- commands:
- addbr <bridge> add bridge
- delbr <bridge> delete bridge
- addif <bridge> <device> add interface to bridge
- delif <bridge> <device> delete interface from bridge
- setageing <bridge> <time> set ageing time
- setbridgeprio <bridge> <prio> set bridge priority
- setfd <bridge> <time> set bridge forward delay
- sethello <bridge> <time> set hello time
- setmaxage <bridge> <time> set max message age
- setpathcost <bridge> <port> <cost> set path cost
- setportprio <bridge> <port> <prio> set port priority
- show show a list of bridges
- showmacs <bridge> show a list of mac addrs
- showstp <bridge> show bridge stp info
- stp <bridge> {on|off} turn stp on/off
复制代码
不知道这几个对时间设置的参数的具体含义是什么?
谢谢大家! |
|