- 论坛徽章:
- 0
|
cfgmaker --global 'WorkDir: /var/www/mrtg/hqufile' --global 'Options[_]: bits,growright' --output /etc/mrtg/hqufile/mrtg.cfg --snmp-option=:::::2 --ifref=ip --no-down public@192.168.0.1
--base: Get Device Info on public@192.168.0.1:::::2
--base: Vendor Id:
--base: Populating confcache
--snpo: confcache public@192.168.0.1:::::2 Descr lo --> 1
--snpo: confcache public@192.168.0.1:::::2 Descr eth0 --> 2
--snpo: confcache public@192.168.0.1:::::2 Descr eth1 --> 3
--snpo: confcache public@192.168.0.1:::::2 Descr sit0 --> 4
--snpo: confcache public@192.168.0.1:::::2 Type 24 --> 1
--snpo: confcache public@192.168.0.1:::::2 Type 6 --> 2
--snpo: confcache public@192.168.0.1:::::2 Type 6 --> 3 (duplicate)
--snpo: confcache public@192.168.0.1:::::2 Type 131 --> 4
--snpo: confcache public@192.168.0.1:::::2 Ip 127.0.0.1 --> 1
--snpo: confcache public@192.168.0.1:::::2 Ip 202.109.210.46 --> 2
--snpo: confcache public@192.168.0.1:::::2 Ip 192.168.0.1 --> 3
--snpo: confcache public@192.168.0.1:::::2 Eth --> 1
--snpo: confcache public@192.168.0.1:::::2 Eth 00-30-48-72-d9-38 --> 2
--snpo: confcache public@192.168.0.1:::::2 Eth 00-30-48-72-d9-39 --> 3
--snpo: confcache public@192.168.0.1:::::2 Eth --> 4 (duplicate)
--base: Get Interface Info
--base: Walking ifIndex
--base: Walking ifType
--base: Walking ifAdminStatus
--base: Walking ifOperStatus
--base: Walking ifSpeed
--base: Walking ifHighSpeed
--base: snmpget public@192.168.0.1:::::2:v4only for ifHighSpeed.1 -> Mb/s
--base: snmpget public@192.168.0.1:::::2:v4only for ifHCInOctets.1 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget public@192.168.0.1:::::2:v4only for ifHighSpeed.2 -> Mb/s
--base: snmpget public@192.168.0.1:::::2:v4only for ifHCInOctets.2 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget public@192.168.0.1:::::2:v4only for ifHighSpeed.3 -> Mb/s
--base: snmpget public@192.168.0.1:::::2:v4only for ifHCInOctets.3 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: snmpget public@192.168.0.1:::::2:v4only for ifHighSpeed.4 -> Mb/s
--base: snmpget public@192.168.0.1:::::2:v4only for ifHCInOctets.4 ->
--base: check for HighspeedCounters failed ... Dropping back to V1
--base: Writing /etc/mrtg/hqufile/mrtg.cfg |
|