- 论坛徽章:
- 19
|
方兆国 发表于 2012-01-13 19:42
回复 8# chenyx
-a或--all mkisofs通常不处理备份文件。使用此参数可以把备份文件加到映像文件中。
-A<应用程序ID>或-appid<应用程序ID> 指定光盘的应用程序ID。
-abstract<摘要文件> 指定摘要文件的文件名。
-b<开机映像文件>或-eltorito-boot<开机映像文件> 指定在制作可开机光盘时所需的开机映像文件。
-biblio<ISBN文件> 指定ISBN文件的文件名,ISBN文件位于光盘根目录下,记录光盘的ISBN。
-c<开机文件名称> 制作可开机光盘时,mkisofs会将开机映像文件中的全-eltorito-catalog<开机文件名称>全部内容作成一个文件。
-C<盘区编号,盘区编号> 将许多节区合成一个映像文件时,必须使用此参数。
-copyright<版权信息文件> 指定版权信息文件的文件名。
-d或-omit-period 省略文件后的句号。
-D或-disable-deep-relocation ISO 9660最多只能处理8层的目录,超过8层的部分,RRIP会自动将它们设置成ISO 9660兼容的格式。使用-D参数可关闭此功能。
-f或-follow-links 忽略符号连接。
-h 显示帮助。
-hide<目录或文件名> 使指定的目录或文件在ISO 9660或Rock RidgeExtensions的系统中隐藏。
-hide-joliet<目录或文件名> 使指定的目录或文件在Joliet系统中隐藏。
-J或-joliet 使用Joliet格式的目录与文件名称。
-l或-full-iso9660-filenames 使用ISO 9660 32字符长度的文件名。
-L或-allow-leading-dots 允许文件名的第一个字符为句号。
-log-file<记录文件> 在执行过程中若有错误信息,预设会显示在屏幕上。
-m<目录或文件名>或-exclude<目录或文件名> 指定的目录或文件名将不会房入映像文件中。
-M<映像文件>或-prev-session<映像文件> 与指定的映像文件合并。
-N或-omit-version-number 省略ISO 9660文件中的版本信息。
-o<映像文件>或-output<映像文件> 指定映像文件的名称。
-p<数据处理人>或-preparer<数据处理人> 记录光盘的数据处理人。
-print-size 显示预估的文件系统大小。
-quiet 执行时不显示任何信息。
-r或-rational-rock 使用Rock Ridge Extensions,并开放全部文件的读取权限。
-R或-rock 使用Rock Ridge Extensions。
-sysid<系统ID> 指定光盘的系统ID。
-T或-translation-table 建立文件名的转换表,适用于不支持Rock Ridge Extensions的系统上。
-v或-verbose 执行时显示详细的信息。
-V<光盘ID>或-volid<光盘ID> 指定光盘的卷册集ID。
-volset-size<光盘总数> 指定卷册集所包含的光盘张数。
-volset-seqno<卷册序号> 指定光盘片在卷册集中的编号。
-x<目录> 指定的目录将不会放入映像文件中。
-z 建立通透性压缩文件的SUSP记录,此记录目前只在Alpha机器上的Linux有效。
这些来自于百度百科- $ mkisofs --help
- Usage: genisoimage [options] file...
- Options:
- -nobak Do not include backup files
- -no-bak Do not include backup files
- -abstract FILE Set Abstract filename
- -A ID, -appid ID Set Application ID
- -biblio FILE Set Bibliographic filename
- -cache-inodes Cache inodes (needed to detect hard links)
- -no-cache-inodes Do not cache inodes (if filesystem has no unique unides)
- -check-oldnames Check all imported ISO9660 names from old session
- -check-session FILE Check all ISO9660 names from previous session
- -copyright FILE Set Copyright filename
- -debug Set debug flag
- -b FILE, -eltorito-boot FILE
- Set El Torito boot image name
- -e FILE, -efi-boot FILE Set EFI boot image name
- -eltorito-alt-boot Start specifying alternative El Torito boot parameters
- -B FILES, -sparc-boot FILES Set sparc boot image names
- -sunx86-boot FILES Set sunx86 boot image names
- -G FILE, -generic-boot FILE Set generic boot image name
- -sparc-label label text Set sparc boot disk label
- -sunx86-label label text Set sunx86 boot disk label
- -c FILE, -eltorito-catalog FILE
- Set El Torito boot catalog name
- -C PARAMS, -cdrecord-params PARAMS
- Magic paramters from cdrecord
- -d, -omit-period Omit trailing periods from filenames (violates ISO9660)
- -dir-mode mode Make the mode of all directories this mode.
- -D, -disable-deep-relocation
- Disable deep directory relocation (violates ISO9660)
- -file-mode mode Make the mode of all plain files this mode.
- -f, -follow-links Follow symbolic links
- -gid gid Make the group owner of all files this gid.
- -graft-points Allow to use graft points for filenames
- -root DIR Set root directory for all new files and directories
- -old-root DIR Set root directory in previous session that is searched for files
- -help Print option help
- -hide GLOBFILE Hide ISO9660/RR file
- -hide-list FILE File with list of ISO9660/RR files to hide
- -hidden GLOBFILE Set hidden attribute on ISO9660 file
- -hidden-list FILE File with list of ISO9660 files with hidden attribute
- -hide-joliet GLOBFILE Hide Joliet file
- -hide-joliet-list FILE File with list of Joliet files to hide
- -hide-joliet-trans-tbl Hide TRANS.TBL from Joliet tree
- -hide-rr-moved Rename RR_MOVED to .rr_moved in Rock Ridge tree
- -gui Switch behaviour for GUI
- -i ADD_FILES No longer supported
- -input-charset CHARSET Local input charset for file name conversion
- -output-charset CHARSET Output charset for file name conversion
- -iso-level LEVEL Set ISO9660 conformance level (1..3) or 4 for ISO9660 version 2
- -J, -joliet Generate Joliet directory information
- -joliet-long Allow Joliet file names to be 103 Unicode characters
- -jcharset CHARSET Local charset for Joliet directory information
- -l, -full-iso9660-filenames Allow full 31 character filenames for ISO9660 names
- -max-iso9660-filenames Allow 37 character filenames for ISO9660 names (violates ISO9660)
- -allow-limited-size Allow different file sizes in ISO9660/UDF on large files
- -allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
- -ldots Allow ISO9660 filenames to start with '.' (violates ISO9660)
- -L, -allow-leading-dots Allow ISO9660 filenames to start with '.' (violates ISO9660)
- -log-file LOG_FILE Re-direct messages to LOG_FILE
- -m GLOBFILE, -exclude GLOBFILE
- Exclude file name
- -exclude-list FILE File with list of file names to exclude
- -pad Pad output to a multiple of 32k (default)
- -no-pad Do not pad output to a multiple of 32k
- -M FILE, -prev-session FILE Set path to previous session to merge
- -dev SCSIdev Set path to previous session to merge
- -N, -omit-version-number Omit version number from ISO9660 filename (violates ISO9660)
- -new-dir-mode mode Mode used when creating new directories.
- -force-rr Inhibit automatic Rock Ridge detection for previous session
- -no-rr Inhibit reading of Rock Ridge attributes from previous session
- -no-split-symlink-components
- Inhibit splitting symlink components
- -no-split-symlink-fields Inhibit splitting symlink fields
- -o FILE, -output FILE Set output file name
- -path-list FILE File with list of pathnames to process
- -p PREP, -preparer PREP Set Volume preparer
- -print-size Print estimated filesystem size and exit
- -publisher PUB Set Volume publisher
- -P PUB, -publisher PUB Set Volume publisher
- -quiet Run quietly
- -r, -rational-rock Generate rationalized Rock Ridge directory information
- -R, -rock Generate Rock Ridge directory information
- -s TYPE, -sectype TYPE Set output sector type to e.g. data/xa1/raw
- -alpha-boot FILE Set alpha boot image name (relative to image root)
- -hppa-cmdline CMDLINE Set hppa boot command line (relative to image root)
- -hppa-kernel-32 FILE Set hppa 32-bit image name (relative to image root)
- -hppa-kernel-64 FILE Set hppa 64-bit image name (relative to image root)
- -hppa-bootloader FILE Set hppa boot loader file name (relative to image root)
- -hppa-ramdisk FILE Set hppa ramdisk file name (relative to image root)
- -mips-boot FILE Set mips boot image name (relative to image root)
- -mipsel-boot FILE Set mipsel boot image name (relative to image root)
- -jigdo-jigdo FILE Produce a jigdo .jigdo file as well as the .iso
- -jigdo-template FILE Produce a jigdo .template file as well as the .iso
- -jigdo-min-file-size SIZE Minimum size for a file to be listed in the jigdo file
- -jigdo-force-md5 PATTERN Pattern(s) where files MUST match an externally-supplied MD5sum
- -jigdo-exclude PATTERN Pattern(s) to exclude from the jigdo file
- -jigdo-map PATTERN1=PATTERN2
- Pattern(s) to map paths (e.g. Debian=/mirror/debian)
- -md5-list FILE File containing MD5 sums of the files that should be checked
- -jigdo-template-compress ALGORITHM
- Choose to use gzip or bzip2 compression for template data; default is gzip
- -sort FILE Sort file content locations according to rules in FILE
- -split-output Split output into files of approx. 1GB size
- -stream-file-name FILE_NAME Set the stream file ISO9660 name (incl. version)
- -stream-media-size # Set the size of your CD media in sectors
- -sysid ID Set System ID
- -T, -translation-table Generate translation tables for systems that don't understand long filenames
- -table-name TABLE_NAME Translation table file name
- -ucs-level LEVEL Set Joliet UCS level (1..3)
- -udf Generate UDF file system
- -dvd-video Generate DVD-Video compliant UDF file system
- -uid uid Make the owner of all files this uid.
- -U, -untranslated-filenames Allow Untranslated filenames (for HPUX & AIX - violates ISO9660). Forces -l, -d, -N, -allow-leading-dots, -relaxed-filenames, -allow-lowercase, -allow-multidot
- -relaxed-filenames Allow 7 bit ASCII except lower case characters (violates ISO9660)
- -no-iso-translate Do not translate illegal ISO characters '~', '-' and '#' (violates ISO9660)
- -allow-lowercase Allow lower case characters in addition to the current character set (violates ISO9660)
- -allow-multidot Allow more than one dot in filenames (e.g. .tar.gz) (violates ISO9660)
- -use-fileversion LEVEL Use file version # from filesystem
- -v, -verbose Verbose
- -version Print the current version
- -V ID, -volid ID Set Volume ID
- -volset ID Set Volume set ID
- -volset-size # Set Volume set size
- -volset-seqno # Set Volume set sequence number
- -x FILE, -old-exclude FILE Exclude file name(depreciated)
- -hard-disk-boot Boot image is a hard disk image
- -no-emul-boot Boot image is 'no emulation' image
- -no-boot Boot image is not bootable
- -boot-load-seg # Set load segment for boot image
- -boot-load-size # Set numbers of load sectors
- -boot-info-table Patch boot image with info table
- -XA Generate XA directory attruibutes
- -xa Generate rationalized XA directory attruibutes
- -z, -transparent-compression
- Enable transparent compression of files
- -hfs-type TYPE Set HFS default TYPE
- -hfs-creator CREATOR Set HFS default CREATOR
- -g, -apple Add Apple ISO9660 extensions
- -h, -hfs Create ISO9660/HFS hybrid
- -map MAPPING_FILE Map file extensions to HFS TYPE/CREATOR
- -H MAPPING_FILE, -map MAPPING_FILE
- Map file extensions to HFS TYPE/CREATOR
- -magic FILE Magic file for HFS TYPE/CREATOR
- -probe Probe all files for Apple/Unix file types
- -mac-name Use Macintosh name for ISO9660/Joliet/RockRidge file name
- -no-mac-files Do not look for Unix/Mac files (depreciated)
- -boot-hfs-file FILE Set HFS boot image name
- -part Generate HFS partition table
- -cluster-size SIZE Cluster size for PC Exchange Macintosh files
- -auto FILE Set HFS AutoStart file name
- -no-desktop Do not create the HFS (empty) Desktop files
- -hide-hfs GLOBFILE Hide HFS file
- -hide-hfs-list FILE List of HFS files to hide
- -hfs-volid HFS_VOLID Volume name for the HFS partition
- -icon-position Keep HFS icon position
- -root-info FILE finderinfo for root folder
- -input-hfs-charset CHARSET Local input charset for HFS file name conversion
- -output-hfs-charset CHARSET Output charset for HFS file name conversion
- -hfs-unlock Leave HFS Volume unlocked
- -hfs-bless FOLDER_NAME Name of Folder to be blessed
- -hfs-parms PARAMETERS Comma separated list of HFS parameters
- -prep-boot FILE PReP boot image file -- up to 4 are allowed
- -chrp-boot Add CHRP boot header
- --cap Look for AUFS CAP Macintosh files
- --netatalk Look for NETATALK Macintosh files
- --double Look for AppleDouble Macintosh files
- --ethershare Look for Helios EtherShare Macintosh files
- --exchange Look for PC Exchange Macintosh files
- --sgi Look for SGI Macintosh files
- --macbin Look for MacBinary Macintosh files
- --single Look for AppleSingle Macintosh files
- --ushare Look for IPT UShare Macintosh files
- --xinet Look for XINET Macintosh files
- --dave Look for DAVE Macintosh files
- --sfm Look for SFM Macintosh files
- --osx-double Look for MacOS X AppleDouble Macintosh files
- --osx-hfs Look for MacOS X HFS Macintosh files
- Report problems to debburn-devel@lists.alioth.debian.org.
复制代码 系统帮助内容也差不多 |
|