- 论坛徽章:
- 0
|
本帖最后由 fender0107401 于 2013-04-19 15:13 编辑
- dmesg
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
- [email]root@farrell.cse.buffalo.edu[/email]:/usr/obj/usr/src/sys/GENERIC amd64
- CPU: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz (2394.00-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x206c2 Family = 6 Model = 2c Stepping = 2
- Features=0x1fe3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
- Features2=0x82982203<SSE3,PCLMULQDQ,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,HV>
- AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant
- real memory = 19327352832 (18432 MB)
- avail memory = 18590597120 (17729 MB)
- Event timer "LAPIC" quality 600
- ACPI APIC Table: <PTLTD APIC >
- FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- cpu4 (AP): APIC ID: 4
- cpu5 (AP): APIC ID: 5
- WARNING: Non-uniform processors.
- WARNING: Using suboptimal topology.
- MADT: Forcing active-low polarity and level trigger for SCI
- ioapic0 <Version 1.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- acpi0: <INTEL 440BX> on motherboard
- acpi0: Power Button (fixed)
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- cpu4: <ACPI CPU> on acpi0
- cpu5: <ACPI CPU> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- isab0: <PCI-ISA bridge> at device 7.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x10c0-0x10cf at device 7.1 on pci0
- ata0: <ATA channel 0> on atapci0
- ata1: <ATA channel 1> on atapci0
- pci0: <bridge> at device 7.3 (no driver attached)
- pci0: <base peripheral> at device 7.7 (no driver attached)
- vgapci0: <VGA-compatible display> port 0x10d0-0x10df mem 0xd8000000-0xdbffffff,0xd0800000-0xd0ffffff irq 16 at device 15.0 on pci0
- mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x1400-0x14ff mem 0xd0040000-0xd005ffff,0xd0020000-0xd003ffff irq 17 at device 16.0 on pci0
- mpt0: MPI Version=1.2.0.0
- pcib2: <ACPI PCI-PCI bridge> at device 17.0 on pci0
- pci2: <ACPI PCI bus> on pcib2
- em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0x2000-0x203f mem 0xd1020000-0xd103ffff,0xd1000000-0xd100ffff irq 18 at device 0.0 on pci2
- em0: Memory Access and/or Bus Master bits were not set!
- em0: Ethernet address: 00:50:56:89:7f:8f
- pcib3: <ACPI PCI-PCI bridge> at device 21.0 on pci0
- pci3: <ACPI PCI bus> on pcib3
- pcib4: <ACPI PCI-PCI bridge> at device 21.1 on pci0
- pci4: <ACPI PCI bus> on pcib4
- pcib5: <ACPI PCI-PCI bridge> at device 21.2 on pci0
- pci5: <ACPI PCI bus> on pcib5
- pcib6: <ACPI PCI-PCI bridge> at device 21.3 on pci0
- pci6: <ACPI PCI bus> on pcib6
- pcib7: <ACPI PCI-PCI bridge> at device 21.4 on pci0
- pci7: <ACPI PCI bus> on pcib7
- pcib8: <ACPI PCI-PCI bridge> at device 21.5 on pci0
- pci8: <ACPI PCI bus> on pcib8
- pcib9: <ACPI PCI-PCI bridge> at device 21.6 on pci0
- pci9: <ACPI PCI bus> on pcib9
- pcib10: <ACPI PCI-PCI bridge> at device 21.7 on pci0
- pci10: <ACPI PCI bus> on pcib10
- pcib11: <ACPI PCI-PCI bridge> at device 22.0 on pci0
- pci11: <ACPI PCI bus> on pcib11
- pcib12: <ACPI PCI-PCI bridge> at device 22.1 on pci0
- pci12: <ACPI PCI bus> on pcib12
- pcib13: <ACPI PCI-PCI bridge> at device 22.2 on pci0
- pci13: <ACPI PCI bus> on pcib13
- pcib14: <ACPI PCI-PCI bridge> at device 22.3 on pci0
- pci14: <ACPI PCI bus> on pcib14
- pcib15: <ACPI PCI-PCI bridge> at device 22.4 on pci0
- pci15: <ACPI PCI bus> on pcib15
- pcib16: <ACPI PCI-PCI bridge> at device 22.5 on pci0
- pci16: <ACPI PCI bus> on pcib16
- pcib17: <ACPI PCI-PCI bridge> at device 22.6 on pci0
- pci17: <ACPI PCI bus> on pcib17
- pcib18: <ACPI PCI-PCI bridge> at device 22.7 on pci0
- pci18: <ACPI PCI bus> on pcib18
- pcib19: <ACPI PCI-PCI bridge> at device 23.0 on pci0
- pci19: <ACPI PCI bus> on pcib19
- pcib20: <ACPI PCI-PCI bridge> at device 23.1 on pci0
- pci20: <ACPI PCI bus> on pcib20
- pcib21: <ACPI PCI-PCI bridge> at device 23.2 on pci0
- pci21: <ACPI PCI bus> on pcib21
- pcib22: <ACPI PCI-PCI bridge> at device 23.3 on pci0
- pci22: <ACPI PCI bus> on pcib22
- pcib23: <ACPI PCI-PCI bridge> at device 23.4 on pci0
- pci23: <ACPI PCI bus> on pcib23
- pcib24: <ACPI PCI-PCI bridge> at device 23.5 on pci0
- pci24: <ACPI PCI bus> on pcib24
- pcib25: <ACPI PCI-PCI bridge> at device 23.6 on pci0
- pci25: <ACPI PCI bus> on pcib25
- pcib26: <ACPI PCI-PCI bridge> at device 23.7 on pci0
- pci26: <ACPI PCI bus> on pcib26
- pcib27: <ACPI PCI-PCI bridge> at device 24.0 on pci0
- pci27: <ACPI PCI bus> on pcib27
- pcib28: <ACPI PCI-PCI bridge> at device 24.1 on pci0
- pci28: <ACPI PCI bus> on pcib28
- pcib29: <ACPI PCI-PCI bridge> at device 24.2 on pci0
- pcib29: failed to allocate initial I/O port window: 0xf000-0xffff
- pci29: <ACPI PCI bus> on pcib29
- pcib30: <ACPI PCI-PCI bridge> at device 24.3 on pci0
- pci30: <ACPI PCI bus> on pcib30
- pcib31: <ACPI PCI-PCI bridge> at device 24.4 on pci0
- pci31: <ACPI PCI bus> on pcib31
- pcib32: <ACPI PCI-PCI bridge> at device 24.5 on pci0
- pci32: <ACPI PCI bus> on pcib32
- pcib33: <ACPI PCI-PCI bridge> at device 24.6 on pci0
- pci33: <ACPI PCI bus> on pcib33
- pcib34: <ACPI PCI-PCI bridge> at device 24.7 on pci0
- pci34: <ACPI PCI bus> on pcib34
- acpi_acad0: <AC Adapter> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- psm0: <PS/2 Mouse> irq 12 on atkbdc0
- psm0: [GIANT-LOCKED]
- psm0: model IntelliMouse, device ID 3
- ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
- ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
- ppbus0: <Parallel port bus> on ppc0
- plip0: <PLIP network interface> on ppbus0
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- fd0: <1440-KB 3.5" drive> on fdc0 drive 0
- qpi0: <QPI system bus> on motherboard
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- acpi_throttle0: <ACPI CPU Throttling> on cpu0
- acpi_throttle1: <ACPI CPU Throttling> on cpu1
- acpi_throttle1: failed to attach P_CNT
- device_attach: acpi_throttle1 attach returned 6
- acpi_throttle2: <ACPI CPU Throttling> on cpu2
- acpi_throttle2: failed to attach P_CNT
- device_attach: acpi_throttle2 attach returned 6
- acpi_throttle3: <ACPI CPU Throttling> on cpu3
- acpi_throttle3: failed to attach P_CNT
- device_attach: acpi_throttle3 attach returned 6
- acpi_throttle4: <ACPI CPU Throttling> on cpu4
- acpi_throttle4: failed to attach P_CNT
- device_attach: acpi_throttle4 attach returned 6
- acpi_throttle5: <ACPI CPU Throttling> on cpu5
- acpi_throttle5: failed to attach P_CNT
- device_attach: acpi_throttle5 attach returned 6
- Timecounters tick every 10.000 msec
- da0 at mpt0 bus 0 scbus2 target 0 lun 0
- da0: <VMware Virtual disk 1.0> Fixed Direct Access SCSI-2 device
- da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
- da0: Command Queueing enabled
- da0: 81920MB (167772160 512 byte sectors: 255H 63S/T 10443C)
- cd0 at ata1 bus 0 scbus1 target 0 lun 0
- cd0: <NECVMWar VMware IDE CDR10 1.00> Removable CD-ROM SCSI-0 device
- cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
- cd0: Attempt to query device size failed: NOT READY, Medium not present
- SMP: AP CPU #2 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #5 Launched!
- SMP: AP CPU #4 Launched!
- Trying to mount root from ufs:/dev/da0p2 [rw]...
复制代码 |
|