- 论坛徽章:
- 0
|
我的配置文件
DefaultVendor=0x12d1
DefaultProduct=0x1d50
TargetVendor=0x12d1
TargetProduct=0x1d50
MessageContent="55534243123456780600000080010011060000000000000000000000000000"
TargetClass=0xff
CheckSuccess=20
NeedResponse=1
终端打印信息
# usb 1-1.1: new high speed USB device using rtl8652-ehci and address 9
usb 1-1.1: New USB device found, idVendor=12d1, idProduct=1d50
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: HUAWEI Mobile System Solution
usb 1-1.1: Manufacturer: HUAWEI Mobile
usb 1-1.1: SerialNumber: 000000-00-0000000
parse_hotplug_info() devinfo:12d1:1d50
usb 1-1.1: configuration #1 chosen from 3 choices
init
++++++Ready start mount usb store++++
scsi4 : SCSI emulation for USB Mass Storage devices
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
No devices in default mode found. Nothing to do. Bye.
Looking for target devices again ... add by Realtek
Looking for default devices again...add by May
Found devices in default mode, class or configuration (1)
Accessing device 009 on bus 001 ...
Getting the current device configuration ...
OK, got current deviusb 1-1.1: usbfs: process 1985 (usb_modeswitch) did not claim interface 0 before use
ce configuration (1)
Ambiguous Class/InterfaceClass: 0x02/0x08
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: HUAWEI
Model String: Mobile CMCC CD
Revision String: 1.00
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI Mobile
Product: HUAWEI Mobile System Solution
Serial No.: 000000-00-0000000
-------------------------
Setting up communication with interface 0 ...
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Reading the response to the message (CSW) ...
OK, response successfully read (0 bytes).
Resetting response endpoint 0x81
Resetting message endpoint 0x01
++++++Ready start mount usb store++++
Checking for mode switch (max. 20 times, once per second) ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Waiting for original device to vanish ...
Original device still present after the timeout
Mode switch most likely failed. Bye.
mnet built on 2012.09.12-08:04+0000
usb 1-1: USB disconnect, address 7
usb 1-1.1: USB disconnect, address 9
parse_hotplug_info() devinfo:12d1:1d50
++++++Ready start mount usb store++++
parse_hotplug_info() devinfo:05e3:0610
usb 1-1: new high speed USB device using rtl8652-ehci and address 10
usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 Hub
parse_hotplug_info() devinfo:05e3:0usb 1-1: configuration #1 chosen from 1 choice
610
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using rtl8652-ehci and address 11
++++++Ready start mount usb store++++
usb 1-1.1: New USB device found, idVendor=12d1, idProduct=1d50
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.1: Product: HUAWEI Mobile System Solution
usb 1-1.1: Manufacturer: HUAWEI Mobile
usb 1-1.1: SerialNumber: 000000-00-0000000
parse_hotplug_info() devinfo:12d1:usb 1-1.1: configuration #1 chosen from 3 choices
1d50
scsi5 : SCSI emulation for USB Mass Storage devices
++++++Ready start mount usb store++++
scsi 5:0:0:0: CD-ROM HUAWEI Mobile CMCC CD 1.00 PQ: 0 ANSI: 0
sr0: scsi-1 drive
++++++Ready start mount usb store++++
我的内核版本是2.6.30
请问哪位大侠能帮帮小弟呢??怎么切换过来啊,有没有其他办法呢??
|
|