- 论坛徽章:
- 0
|
----
Information Menu: Enter command > all
Model: hp server rp5470 (model string 9000/800/L3000-7x)
PROCESSOR INFORMATION
HVERSION SVERSION Processor
Processor Speed Model Model/Op CVERSION State
--------- -------- -------- -------- -------- -------------
0 750 MHz 0x05df 0x0491 3. 1 Active
2 750 MHz 0x05df 0x0491 3. 1 Idle
Central Bus Speed (in MHz) : 133
Software ID (dec) : 1126414677
Software ID (hex) : 0x4323b955
Software Capability : 0x01f1
COPROCESSOR INFORMATION
Coprocessor Coprocessor Coprocessor
Processor Model Revision State
----------- ----------- ----------- -----------------
0 0x00000013 1 Functional
2 0x00000013 1 Functional
CACHE INFORMATION
Processor Instruction Cache Size Data Cache Size
----------- ----------------------- ---------------
0 750 KB 1.5 MB
2 750 KB 1.5 MB
MEMORY INFORMATION
MEMORY STATUS TABLE (MB) (Current Boot Status)
Carrier->0 Installed 1 Not installed
Slot 0a 512M Active -
Slot 0b 512M Active -
Slot 1a - -
Slot 1b - -
Slot 2a - -
Slot 2b - -
Slot 3a - -
Slot 3b - -
Subtotal 1024M 0
TOTAL = 1024 MB
---------
Memory Installation Guidelines
------------------------------
- For DIMMs to work, both DIMMs in a slot pair (a/b) must be the same type.
(Same part number = same type)
- For best performance, install DIMMs evenly by type among the carriers,
loading them onto carriers in the following order 0 1.
- For proper cooling, install DIMMs onto carriers in the following order:
0a/b 1a/b 2a/b 3a/b.
- For proper cooling, install carriers in the following order: 0 1.
Active, Installed Memory : 1024 MB of SDRAM
Deallocated Pages : 0 Pages
-----------
Available Memory : 1024 MB
Good Memory Required by OS : 36 MB
Memory
HVERSION SVERSION
-------- ----------
0x0900 0x00000900
I/O MODULE INFORMATION
Path Slot IODC
Type (dec) Number HVERSION SVERSION Vers
---- ----- ------ -------- -------- ----
System bus adapter 0 0x8030 0xc10 0x0
Local bus adapter 0/0 1 0x7820 0xa00 0x0
Local bus adapter 0/1 7 0x7820 0xa00 0x0
Local bus adapter 0/2 5 0x7820 0xa00 0x0
Local bus adapter 0/3 8 0x7820 0xa00 0x0
Local bus adapter 0/4 4 0x7820 0xa00 0x0
Local bus adapter 0/5 6 0x7820 0xa00 0x0
Local bus adapter 0/8 10 0x7820 0xa00 0x0
Local bus adapter 0/9 9 0x7820 0xa00 0x0
Local bus adapter 0/10 12 0x7820 0xa00 0x0
Local bus adapter 0/12 11 0x7820 0xa00 0x0
PCI DEVICE INFORMATION
Path Vendor Device Bus Slot
Description (dec) Id Id # #
----------- ----- ---- ---- --- ---
Ethernet cntlr 0/0/0/0 0x1011 0x19 0 1
SCSI bus cntlr 0/0/1/0 0x1000 0xb 0 1
SCSI bus cntlr 0/0/1/1 0x1000 0xb 0 1
SCSI bus cntlr 0/0/2/0 0x1000 0xf 0 1
SCSI bus cntlr 0/0/2/1 0x1000 0xf 0 1
Comp. ser cntlr 0/0/4/0 0x103c 0x1048 0 2
Comp. ser cntlr 0/0/5/0 0x103c 0x1048 0 2
BOOT INFORMATION
Processor Boot ID
--------- -------
0 2
2 2
Autoboot: ON
Autosearch: ON
Autostart: OFF
Fastboot: OFF
Primary boot path: intscsia.2
0/0/2/0.2
0/0/02/0.2 (hex)
Alternate boot path: intscsia.2
0/0/2/0.2
0/0/02/0.2 (hex)
Console path: 0/0/4/1.0
0/0/04/01.0 (hex)
Keyboard path: 0/0/4/0.0
0/0/04/0.0 (hex)
LAN Station Address: 001083-ff1a28
Mon Feb 25 06:22:28 GMT 2008 (20:08:02:25:06:22:2
FIRMWARE INFORMATION
Firmware Version: 43.22
FRU INFORMATION
FRU Name: CAN_SYS_BD
Part Number: A6797-60001
Serial Number: A56466225472
Physical Location: 00ffff0001ffff69
Engineering Date Code: 4302
Art Work Revision: A1
Scan Revision:
FRU Specific Info: SGHCA15294
FRU Name: MAR_IO_BP
Part Number: A6144-60002
Serial Number: 52SSL8498R
Physical Location: 00ffff0002ffff69
Engineering Date Code: 4140
Art Work Revision: A3
Scan Revision:
FRU Specific Info:
FRU Name: LAN_SCSI_CORE_IO
Part Number: A5191-60011
Serial Number: 52SCFS3BL2
Physical Location: 000000ffff01ff85
Engineering Date Code: 3933
Art Work Revision: A5
Scan Revision:
FRU Specific Info:
FRU Name: SAS_CORE_IO
Part Number: A5191-60012
Serial Number: 52SCH88Y1U
Physical Location: 000000ffff02ff85
Engineering Date Code: 4040
Art Work Revision: C
Scan Revision:
FRU Specific Info:
FRU Name: DISK_BACKPLANE
Part Number: A5191-60004
Serial Number: 52SCH48LU1
Physical Location: 00ffff0004ffff69
Engineering Date Code: 3933
Art Work Revision: A3
Scan Revision:
FRU Specific Info:
FRU Name: PLAT_MON
Part Number: A5191-60010
Serial Number: 52SCGS748J
Physical Location: 00ffffffffffff67
Engineering Date Code: 4045
Art Work Revision: A4
Scan Revision:
FRU Specific Info:
FRU Name: POWER_CONVERTER
Part Number: 0950-3470
Serial Number: 70010CA02067
Physical Location: 00ffffffffffff67
Engineering Date Code:
Art Work Revision:
Scan Revision:
FRU Specific Info:
FRU Name: PRE_MEM_EXT
Part Number: A6155-60001
Serial Number: A56E04124743
Physical Location: 0000ff0000ffff72
Engineering Date Code: 3932
Art Work Revision: A4
Scan Revision:
FRU Specific Info:
FRU Name: DIMM_512
Part Number: A4923-60001
Serial Number: A56E01628173
Physical Location: 0000ff00000aff74
Engineering Date Code: 3913
Art Work Revision: A3
Scan Revision:
FRU Specific Info:
FRU Name: DIMM_512
Part Number: A4923-60001
Serial Number: A56E01628251
Physical Location: 0000ff00000bff74
Engineering Date Code: 3913
Art Work Revision: A3
Scan Revision:
FRU Specific Info:
Information Menu: Enter command > sea
ERROR: Unknown command
Information Menu: Enter command > ma
---- Main Menu ---------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT] [<path>] Display or modify a path
SEArch [DIsplay|IPL] [<path>] Search for boot devices
COnfiguration menu Displays or sets boot values
INformation menu Displays hardware information
SERvice menu Displays service commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
----
Main Menu: Enter command or menu > sea
Searching for potential boot device(s)
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
IODC
Path# Device Path (dec) Device Path (mnem) Device Type Rev
----- ----------------- ------------------ ----------- ----
P0 0/0/2/0.2 intscsia.2 Random access media 1
P1 0/0/2/1.0 Random access media 1
Main Menu: Enter command or menu > bo p1
Interact with IPL (Y, N, or Cancel)?> n
Booting...
Boot IO Dependent Code (IODC) revision 1
HARD Booted.
ISL Revision A.00.43 Apr 12, 2000
ISL booting hpux (;0):INSTALL
Boot
: disk(0/0/2/1.0.0.0.0.0.0;0):WINSTALL
8941568 + 1642496 + 2596176 start 0x1fef68
alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x3fb01000.
到此不能引导,断电重启就会出现以上报错,请教高手. |
|