XSB能直接ADDBORD到M服务器里瓦 SETDCL为何要转成LSB

wangnn

新BOARD 插入后 自动生成的XSB 序列 我看文档里都是先用 SETDCL 把XSB转成LSB  

是不是在QUAD模式下才需要

Use the setdcl( command to specify DCL information.
3. Use the showdcl( command to display DCL information.
<Example> Display DCL information on domain ID 2.
XSCF> showdcl -v -d 2
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
02 Powered Off System
00 00-0 False False False
01 -
:
15 -
<Example 1> In domain ID 2, specify XSB#01-0 for an LSB#07, system
for the configuration policy, false for Omit-memory option, false
for Omit-I/O option, and false for floating board.
XSCF> setdcl -d 2 -a 7=1-0
XSCF> setdcl -d 2 -s policy=system
XSCF> setdcl -d 2 -s no-mem=false 7
XSCF> setdcl -d 2 -s no-io=false 7
XSCF> setdcl -d 2 -s float=false 7
<Example 2> In domain ID 2, specify XSB#00-0 for an LSB#00,
XSB#00-1 for an LSB#01, XSB#01-1 for an LSB#08, XSB#01-2 for an
LSB#09, XSB#01-3 for an LSB#10.
XSCF> setdcl -d 2 -a 0=0-0 1=0-1 8=1-1 9=1-2 10=1-3