求助：P6 570想安装操作系统AIX5308，硬盘在5802扩展柜上，识别不到，怎么办啊

patiencesly

新手求助：单位一台P6 570的机器，有3个分区，其中一个分区的所有硬盘在5802扩展柜上，现在想在这个分区上安装AIX 5308，在安装过程中，系统识别不到硬盘，请问该怎么解决啊？

patiencesly

分配过去了，上面原来有系统，是aix 6104的，现在想换成5308的。\r\n是不是5.3版本的识别不到5802扩展柜上的硬盘啊

patiencesly

通过hmc看吗，怎么分配不知道啊

yddll

(#5802) - 12X I/O Drawer PCIe, SFF disk\r\nThis feature provides a 4U high I/O drawer containing ten PCIe slots and eighteen SAS hot-swap Small Form Factor disk bays. This drawer attaches to the central electronics complex via 12X DDR cables (#1862, #1864, or #1865). When SFF Disk are installed, they are driven by at least one SAS PCIe adapter and SAS AT cable (#368. Using a mode switch the 18 SFF slots can be configured as one group of 18 slots (AIX/Linux) or two groups or 9 slots (AIX/IBM i/Linux) or four groups of 4 or 5 slots (AIX/Linux). \r\n\r\nAttributes provided: 10 PCIe Slots, 18 SFF SAS disk bays \r\nAttributes required: Available 12X connection ports. \r\nFor 9117-MMA: (#5802) \r\nMinimum required: 0 \r\nMaximum allowed: 16 (Initial order maximum: 16) \r\nOS level required: \r\nAIX 5.3 with the 5300-07 Technology Level and Service Pack 9, or later \r\nAIX 5.3 with the 5300-08 Technology Level and Service Pack 7, or later \r\nAIX 5.3 with the 5300-09 Technology Level and Service Pack 4, or later \r\nAIX 5.3 with the 5300-10 Technology Level, or later \r\nAIX 6.1 with the 6100-00 Technology Level and Service Pack 9, or later \r\nAIX 6.1 with the 6100-01 Technology Level and Service Pack 5, or later \r\nAIX 6.1 with the 6100-02 Technology Level and Service Pack 4, or later \r\nAIX 6.1 with the 6100-03 Technology Level, or later \r\nIBM i 6.1, or later \r\nSUSE Linux Enterprise Server 10 Service Pack 2 for POWER Systems, or later \r\nRed Hat Enterprise Linux version 4.7 or later \r\nRed Hat Enterprise Linux 5.2 or later \r\nInitial Order/MES/Both/Supported: Both \r\nCSU: Yes \r\nReturn parts MES: No \r\nNote: 2 per 12X loop Minimum firmware level 3.4.2 or later.

guopy007

应该就是没分配好资源

howker3630

lsdev看有没fc0\\fc1类似的设备,如果有说明你HBA卡被系统识别了.如果没有那要看下是不是要安装下驱动程序了.\r\n再lspv看存储硬盘有没有分配到PID号,没有没有说明硬盘有问题,最好找IBM800或存储供应商问下.

AIX深入敌后

HBA卡都好着吗？lsdev -Cc adapter?lspv?

sdsyzj

{:6_665:}