免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 1969 | 回复: 0
打印 上一主题 下一主题

[存储备份] 进行smitty mksysb后,如何看是否备份成功,另外备份中有个attention,帮忙看下,写信 [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2008-01-22 21:49 |只看该作者 |倒序浏览
1。mksysb后怎么看磁带上已经成功备份了
2.  下面是我的备份过程,各位看下是否正确
# smitty mksysb

                                                        Back Up the System

Type or select values in entry fields.
Press Enter AFTER making all desired changes.

                                                        [Entry Fields]
    WARNING:  Execution of the mksysb command will
              result in the loss of all material
              previously stored on the selected
              output medium. This command backs
              up only rootvg volume group.

* Backup DEVICE or FILE                              [/dev/rmt0]                                                               +/
  Create MAP files?                                   no                                                                       +
  EXCLUDE files?                                      no                                                                       +
  List files as they are backed up?                   no                                                                       +
  Verify readability if tape device?                  no                                                                       +
  Generate new /image.data file?                      yes                                                                      +
  EXPAND /tmp if needed?                              no                                                                       +
  Disable software packing of backup?                 no                                                                       +
  Number of BLOCKS to write in a single output       []                                                                         #
     (Leave blank to use a system default)






                           
                           
                           
                           
                           
                           
                           
                           
F1=Help                         F2=Relqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk    F4=List
Esc+5=Reset                     Esc+6x Running command...                                   x    Esc+8=Image
Esc+9=Shell                     Esc+0mqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj         
                                                          COMMAND STATUS

Command: running       stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

[MORE...8]
the size exceeds the system limit.  For information about
fixes or workarounds, see /usr/lpp/bos.sysmgt/README.
***** ATTENTION *****
.
bosboot: Boot image is 27777 512 byte blocks.
Creating list of files to back up.....
Backing up 72784 files..............................
4955 of 72784 files (6%)..............................
6099 of 72784 files (8%)..............................out
9219 of 72784 files (12%)..............................
11999 of 72784 files (16%)..............................
18690 of 72784 files (25%)..............................
20119 of 72784 files (27%).......     ..................
20874 of 72784 files (28%)                          ....
20911 of 72784 files (28%)back up.....                ..
21529 of 72784 files (29%)...                         ..
26410 of 72784 files (36%)                             .
48921of 72784 files (667..............................
69631of 72784 files (89)........
72784of 72784 files (1100%)
0512-038 mksysb: Backup Completed Successfully.

bosboot: Boot image is 27777 512 byte blocks.

***** ATTENTION *****
The boot image you just created might fail to boot because
the size exceeds the system limit.  For information about
fixes or workarounds, see /usr/lpp/bos.sysmgt/README....
***** ATTENTION *****(95%)......
72784 of 72784 files (100%)
[BOTTOM] mksysb: Backup Completed Successfully.

                                                          COMMAND STATUS

Command: OK            stdout: yes           stderr: no

Before command completion, additional instructions may appear below.

[TOP]

Creating information file (/image.data) for rootvg..

Creating tape boot image........
bosboot: Boot image is 27777 512 byte blocks.

***** ATTENTION *****
The boot image you just created might fail to boot because
the size exceeds the system limit.  For information about
fixes or workarounds, see /usr/lpp/bos.sysmgt/README.
***** ATTENTION *****
.

Creating list of files to back up.....
Backing up 72784 files..............................
4955 of 72784 files (6%)..............................
6099 of 72784 files (8%)..............................
9219 of 72784 files (12%)..............................
11999 of 72784 files (16%)..............................
18690 of 72784 files (25%)..............................
20119 of 72784 files (27%)..............................
20874 of 72784 files (28%)..............................
20911 of 72784 files (28%)..............................
21529 of 72784 files (29%)..............................
26410 of 72784 files (36%)..............................
48921 of 72784 files (67%)..............................
69631 of 72784 files (95%)......
[MORE...11]

F1=Help                         F2=Refresh                       F3=Cancel                       Esc+6=Command
Esc+8=Image                     Esc+9=Shell                      Esc+0=Exit
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP