- 论坛徽章:
- 0
|
两台P55A,ds4300,AIX5305,HACMP5209,配置完HACMP,同步是有些Error和Warnning,请大家指教
错误!!!
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...58]
Verifying Cluster Resources...
processing RG: lhdb1_cas
processing RG: lhdb2_cas
processing RG: lhdb_con
A corrective action is available for the condition reported below:
ERROR: The HACMP timestamp file for shared volume group: oradatavg is inconsiste
nt
with the time stamp in the VGDA for the following nodes: lhdb1 lhdb2
To correct the above condition, run verification & synchronization with
[MORE...24]
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...23]
recommended for networks that will use IP aliasing.
ERROR: Service adapter lhdb2_svc on network net_ether_01 is on the same
subnet as at least one of the communication interfaces on this network.
Service labels must be on a different subnet when the network is configured
to use IP aliasing for IP address takeover.
ERROR: Service adapter lhdb1_svc on network net_ether_01 is on the same
subnet as at least one of the communication interfaces on this network.
Service labels must be on a different subnet when the network is configured
to use IP aliasing for IP address takeover.
ERROR: Service adapter lhdb2_svc on network net_ether_01 is on the same
subnet as at least one of the communication interfaces on this network.
[MORE...59]
告警!!!
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...7]
Verifying Cluster Topology...
WARNING: There may be an insufficient number of communication interfaces defined
on node: lhdb1, network: net_ether_01. Multiple communication interfaces are
recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined
on node: lhdb2, network: net_ether_01. Multiple communication interfaces are
recommended for networks that will use IP aliasing.
WARNING: There may be an insufficient number of communication interfaces defined
on node: lhdb1, network: net_ether_010. Multiple communication interfaces are
[MORE...75]
COMMAND STATUS
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...79]
to access cluster verification and synchronization with corrective actions.
-----------------------------------------------------------------
WARNING: Only one node: lhdb1 was defined for resource group: lhdb1_cas.
WARNING: Only one node: lhdb2 was defined for resource group: lhdb2_cas.
Verification exiting with error count: 5
cldare: Failures detected during verification. Please correct
the errors and retry this command.
Verification has completed normally.
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
[MORE...45]
WARNING: File 'netmon.cf' is missing or empty on node lhdb2. This file is needed
for a cluster with the single-adapter network net_ether_010. Please create 'net
mon.cf' file on node lhdb2 as described in 'HACMP Planning and Installation Guid
e'.
WARNING: File 'netmon.cf' is missing or empty on node lhdb1. This file is needed
for a cluster with the single-adapter network net_ether_01. Please create 'netm
on.cf' file on node lhdb1 as described in 'HACMP Planning and Installation Guide
'.
WARNING: File 'netmon.cf' is missing or empty on node lhdb2. This file is needed
for a cluster with the single-adapter network net_ether_01. Please create 'netm
on.cf' file on node lhdb2 as described in 'HACMP Planning and Installation Guide
'.
[MORE...37] |
|