每次关闭控制台,sun 880就到了ok状态

hechen

sun blade 150控制台用串口连接到sun 880服务器上,过去关闭控制台没有什么问题,现在若要关闭控制台,服务起也跟着到了ok状态了,这是什么原因呢?

yuio654

grep ^[^#$] /etc/default/kbd

结果贴出来

easybegin

vi  /etc/default/kbd

把串口那个给注释掉。

然后kbd -i

hechen

/etc/default/kbd
#
# kbd default settings processed via kbd(1).
#
# KEYBOARD_ABORT affects the default behavior of the keyboard abort
# sequence, see kbd(1) for details.  The default value is "enable". The
# optional values are "disable" or "alternate". Any other value is ignored.
# If you choose "alternate" it will affect the serial console drivers  ONLY.
# The keyboard BREAK (sequence and plug/unplug) won't be affected by this.
# If "alternate" is in effect any protocol (PPP, SLIP... etc) should not be
# run over the serial console port.
#
# KEYCLICK affects the default keyclick behavior. Possible values are
# 'on' and 'off'.  Any other value is ignored. The default behavior is
# to leave the current keyclick setting unchanged.
#
# Uncomment the following line to disable keyboard or serial device
# abort sequences:
#KEYBOARD_ABORT=disable

# Uncomment the following line to enable a non-BREAK alternate
# serial input device abort sequence:
#KEYBOARD_ABORT=alternate

# Uncomment the following line to change the keyclick behavior:
#KEYCLICK=off

zhmzhouming

留名

easybegin

/etc/default/kbd
#
# kbd default settings processed via kbd(1).
#
# KEYBOARD_ABORT affects the default behavior of the keyboard abort
# sequence, see kbd(1) for details.  The default value is "enable". The
# optional values are "disable" or "alternate". Any other value is ignored.
# If you choose "alternate" it will affect the serial console drivers  ONLY.
# The keyboard BREAK (sequence and plug/unplug) won't be affected by this.
# If "alternate" is in effect any protocol (PPP, SLIP... etc) should not be
# run over the serial console port.
#
# KEYCLICK affects the default keyclick behavior. Possible values are
# 'on' and 'off'.  Any other value is ignored. The default behavior is
# to leave the current keyclick setting unchanged.
#
# Uncomment the following line to disable keyboard or serial device
# abort sequences:
KEYBOARD_ABORT=disable

# Uncomment the following line to enable a non-BREAK alternate
# serial input device abort sequence:
KEYBOARD_ABORT=alternate

# Uncomment the following line to change the keyclick behavior:
#KEYCLICK=off




改成上面这个样子，然后kbd -i

guopy007

路过 顶一下

doging

把钥匙打到安全模式