IBM BladeCenter JS22挂接MSA1500连接故障：

ytycy

环境：
主机：IBM BladeCenter JS22，安装系统 AIX5.3
存储：HP MSA1500
连接方式：通过光纤跳线直连
连线以后在MSA1500中可以发现AIX的wwn：
CLI-1> show connections

Connection Name: hpconnect4
   Host WWNN = 50014380-017245A3
   Host WWPN = 50014380-017245A2
   Profile Name = HP
   Unit Offset = 0
   Controller 1 Port 1 Status = Online
   Controller 2 Port 1 Status = Offline

Connection Name: <Unknown>
   Host WWNN = 2000001B-321B8206
   Host WWPN = 2100001B-321B8206
   Profile Name = Default
   Unit Offset = 0
   Controller 1 Port 1 Status = Offline
   Controller 2 Port 1 Status = Online

Connection Name: <Unknown>
   Host WWNN = 2000001B-321B9906
   Host WWPN = 2100001B-321B9906
   Profile Name = Default
   Unit Offset = 0
   Controller 1 Port 1 Status = Offline
   Controller 2 Port 1 Status = Online

先设置好了unit及unit ID。
CLI-1> show disks
Disk List:   (box,bay)    (B:T:L)      Size     Speed    Units
Enclosure 1:    SCSI     (2:15:00)  PROLIANT 4L7E*DB2.30
   Disk101     (1,01)    (2:00:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk102     (1,02)    (2:01:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk103     (1,03)    (2:02:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk104     (1,04)    (2:03:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk105     (1,05)    (2:04:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk106     (1,06)    (2:05:00)    300.0GB  160 MB/s  0, 1, 3, 4
   Disk107     (1,07)    (2:08:00)    300.0GB  160 MB/s  none
其中，3 4打算用来给aix用。


问题：
1、在MSA1500端配置connection时，add connection aix1 wwpn=2000001B-321B8206 profile=？  这里的profile该如何填写？show profile发现没有关于AIX的。填写hp连接也可以建立，不知道有没有影响？建立完成后如下：
Connection Name: aix1
   Host WWNN = 2000001B-321B8206
   Host WWPN = 2000001B-321B8206
   Profile Name = HP
   Unit Offset = 0

2、add acl connection=aix1 unit=3 4  配置映射。
完成后检查：
CLI-1> show connections

Connection Name: hpconnect4
   Host WWNN = 50014380-017245A3
   Host WWPN = 50014380-017245A2
   Profile Name = HP
   Unit Offset = 0
   Controller 1 Port 1 Status = Online
   Controller 2 Port 1 Status = Offline

Connection Name: <Unknown>
   Host WWNN = 2000001B-321B8206
   Host WWPN = 2100001B-321B8206
   Profile Name = Default
   Unit Offset = 0
   Controller 1 Port 1 Status = Offline
   Controller 2 Port 1 Status = Online

Connection Name: <Unknown>
   Host WWNN = 2000001B-321B9906
   Host WWPN = 2100001B-321B9906
   Profile Name = Default
   Unit Offset = 0
   Controller 1 Port 1 Status = Offline
   Controller 2 Port 1 Status = Online

Connection Name: aix1
   Host WWNN = 2000001B-321B8206
   Host WWPN = 2000001B-321B8206
   Profile Name = HP
   Unit Offset = 0
  
新建的aix1中没有关于Controller的信息，同时此时在aix中cfgmgr也报错：
# cfgmgr
Method error (/usr/lib/methods/cfgqlfscsi -l fscsi1 ):
        0514-061 Cannot find a child device.
cfgmgr: 0514-621 WARNING: The following device packages are required for
        device support but are not currently installed.
devices.fcp.array

请各位帮忙看一下怎么处理？

ytycy

up一下