- 论坛徽章:
- 0
|
va 7110上lun的问题
是不是这个:
ceate the host port behavior table on a new array for an environment with
three hosts: one HP-UX (with two host adapters), one Windows NT (with two
host adapters), and one Linux (with one host adapter). If the controller host
port behavior is set to the default HP-UX behavior, entries for HP-UX host are
not be required in the table, but they are included in this example.
1 Log on as system administrator.
2 Obtain the World Wide Name for each host or host adapter.
3 Read the current host port behavior from array alias Array15 into file
HPBset.txt:
armhost -r -f HPBset.txt Array15
Because this is a new array, the existing file will be empty. On existing
arrays this step provides you with a starting point for editing the table
4 Using a text editor, edit file HPBset.txt. Add the necessary entries for
the three hosts. The table entries would look similar to this:
00a05032243f1106 WinNT << Windows NT host adapter 1
7d876a1243d090a3 WinNT << Windows NT host adapter 2
200a6b34b7894284 Linux << Linux host adapter
20a60088g132ca32 HPUX << HP-UX host adapter 1
20a4208c0132c06b HPUX << HP-UX host adapter 2
5 Save the file.
6 Download the updated file to the array:
armhost -w -f HPBset.txt Array15
The path for the file is not shown for this example, but must be included if requied |
|