- 论坛徽章:
- 5
|
- [F1-Main] [F2-Options] [F3-General] [F4-Kernel][F5-Rescue]
- 按F2,查看安装选项:
- Installer Boot Options
- -To disable hardware probing,type:linux noprobe <ENTER>.取消硬件检查
- -To test the install media you are using,type:linux mediacheck <ENTER>.检测介质,光盘是否损坏。
- -To enable rescue mode,type:linux rescue <ENTER>. 要使用修复模式,输入linux rescue参数,进入修复环境,当系统损坏的时候或无法引导的时候
- Press <F5> for more information about rescue mode.
- -If you have a driver disk,type:linux dd <ENTER>. linux dd表示使用第三方的软件,适配器,但必须要有一个驱动软盘,一些商业公司的硬件系统检到不能用,
- 你可以找厂商要一个软盘,上面有第三方软件帮助驱动这个硬件
- -To prompt for the install method being used on a CD-ROM install,
- type:linux askmethod<ENTER>. 当你不需要从光盘装,想从网络或者硬盘装系统,用linux askmethod参数
- -IF you have an installer update disk,type:linux updates<ENTER>.如果你以前安装过linux系统,现在想升一下级,用linux updates
- -To test the memory in your system type:memtest86<ENTER>
- (This option is only available when booting from CD.)
- [F1-Main] [F2-Options] [F3-General] [F4-Kernel][F5-Rescue]
- boot:输入linux text进行字符模式安装
复制代码 |
|