安装jumpstart server的疑问...

flatman

1.0  Before you start

Make sure

    * The install server or boot server is in the same local network segment as client with network link up .

    * NFS services are running On jumpstart server

    * The tftp services are running . To start uncomment the tftp entry in /etc/inet/inetd.conf and restart the inet services

    * The reverse address lookup daemon ,in.rarpd , is running .

我不明白上面的后面三项中的服务如果没有起动，该怎么起动？
请具体指点!

kinux

原帖由 "flatman" 发表：
1.0  Before you start

Make sure

    * The install server or boot server is in the same local network segment as client with network link up .

    * NFS services are running On jumpstart serve..........

1. Boot server must be on the same subnet as the client boot up, it will brocast for getting ip from boot server, if boot server do not in same subnet, router will block the brocast...

2.as the OS is on the jumpstart server, the OS need to be install on the client , client need to get the OS, if jumpstart not share the OS through NFS service, the client can not download the OS from server.

3.TFTP server is use for the client to download the boot image for OS bootup after client get the IP..

4.The reverse address lookup is to check the ip with the MAC address / Ether address are match for the client..

Details , please check SA_288sg.pdf

look in website: www.adminschoice.com

.......