T5140 ilom 怎么进入preboot>提示符

h_cui2008

T5140 ilom 怎么进入preboot>提示符  ，文档上讲按定位钮，但我按没用

财版

是指设置ilom的IP，然后用浏览器连接，直接从光盘镜像安装操作系统吗？

h_cui2008

回复 2# 财版


    不是，ilom系统不起来，不能进入-->提示符，文档将进行preboot>提示符可以将ilom的固件软件重新刷新一下，但文档上讲是按住定位钮，就可以进入preboot>，我按一直没反应只能进入u-boot>提示符

财版

回复 3# h_cui2008


    直接串口连接，看看到哪一步了？

财版

回复 3# h_cui2008


   1. Make sure you have the 7.1.6 firmware from the above patch loaded and active.
2. Cleanly shutdown your box first
3. Power it off and then remove the physical power cords
4. Make sure you have an open serial connection to the SP
5. Plug in the power
6. When you see, "Booting linux in 5 seconds...", cut-n-paste "xyzzy". That will drop you to the u-boot loader prompt.
7. Capture the output from the following commands:

imls
printenv

8. Type "boot" to return to normal operations.



看这个对你有用没有

h_cui2008

回复 5# 财版


6. When you see, "Booting linux in 5 seconds...", cut-n-paste "xyzzy". That will drop you to the u-boot loader prompt


就出现u-boot提示符出现，命令操作过没用，
Starting Servicetags discoverer: stdiscoverer.
/usr/local/bin/stdiscoverer: error while loading shared libraries: libstringutils.so.1: cannot open shared object file: No such file or directory
Starting Servicetags listener: stlistener.
/usr/local/bin/stlistener: error while loading shared libraries: libstringutils.so.1: cannot open shared object file: No such file or directory
/usr/local/bin/autofwupdate: error while loading shared libraries: libcapi.so.1: cannot open shared object file: No such file or directory
/usr/local/bin/eventmgr: error while loading shared libraries: libandroutil.so.1: cannot open shared object file: No such file or directory
/usr/local/bin/luproxy: error while loading shared libraries: libluapi.so.1: cannot open shared object file: No such file or directory
(none) login: /usr/local/bin/eventmgr: error while loading shared libraries: libandroutil.so.1: cannot open shared object file: No such file or directory

不停重复，不能进入

财版

回复 6# h_cui2008


    估计坏的厉害，你在试试，问问蜘蛛有没有办法吧。

财版

回复 6# h_cui2008


    是说出现u-boot的提示符后，敲入那两条命令，然后执行FW的升级过程，然后boot。

h_cui2008

回复 8# 财版


    不知道怎样刷新固件，ilom系统一直就启动不了

财版

回复 9# h_cui2008


    我看是在u-boot提示符，直接set 设置ip，然后用tftp直接升级FW，具体没试过这种，你既然碰上了，正好可以尝试一下。