- 论坛徽章:
- 0
|
如下是ia机型,要开机时进入shell
Shell> info -b all
SYSTEM INFORMATION
Date/Time: Oct 28, 2011 01:01:20 (20:11:10:28:01:01:20)
Manufacturer: hp
Product Name: server rx6600
Product Number: ~~~
Serial Number: ~~~
UUID: ~~~
System Bus Frequency: 266 MHz
PROCESSOR MODULE INFORMATION
# of L3 L4 Family/
CPU Logical Cache Cache Model Processor
Module CPUs Speed Size Size (hex.) Rev State
------ ------- -------- ------ ------ ------- --- ------------
0 2 1.6 GHz 9 MB None 20/01 A1 Active
1 2 1.6 GHz 9 MB None 20/01 A1 Active
CPU threads are turned off.
CPU pstates are turned on.
Press ENTER to continue, 'q' to exit:
MEMORY INFORMATION
Extender 0:
---- DIMM A ----- ---- DIMM B ----- ---- DIMM C ----- ---- DIMM D -----
DIMM Current DIMM Current DIMM Current DIMM Current
--- ------ ---------- ------ ---------- ------ ---------- ------ ----------
0 1024MB Active 1024MB Active 1024MB Active 1024MB Active
1 1024MB Active 1024MB Active 1024MB Active 1024MB Active
2 1024MB Active 1024MB Active 1024MB Active 1024MB Active
3 1024MB Active 1024MB Active 1024MB Active 1024MB Active
4 ---- ---- ---- ----
5 ---- ---- ---- ----
Active Memory : 16384 MB
Installed Memory : 16384 MB
I/O INFORMATION
BOOTABLE DEVICES
Order Media Type Path
----- ---------- ---------------------------------------
Press ENTER to continue, 'q' to exit:
1 HARDDRIVE Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr500000E113A67B6
2,Lun0)/HD(Part1,Sig4AAED4E4-A2CD-11E0-8002-D6217B60E58
2 HARDDRIVE Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr500000E113A67A3
2,Lun0)/HD(Part1,Sig48410276-FC7E-11E0-8002-D6217B60E58
3 HARDDRIVE Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr500000E113A67A3
2,Lun0)/HD(Part3,Sig484102A8-FC7E-11E0-8004-D6217B60E58
4 HARDDRIVE Acpi(HWP0002,PNP0A03,400)/Pci(1|0)/Sas(Addr5000C50017754EE
5,Lun0)/HD(Part1,SigE56B4220-D21A-11E0-8002-D6217B60E58
Seg Bus Dev Fnc Vendor Device Slot
# # # # ID ID # Path
--- --- --- --- ------ ------ --- -----------
00 00 01 00 0x103C 0x1303 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|0)
00 00 01 01 0x103C 0x1302 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|1)
00 00 01 02 0x103C 0x1048 XX Acpi(HWP0002,PNP0A03,0)/Pci(1|2)
00 00 02 00 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|0)
00 00 02 01 0x1033 0x0035 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|1)
00 00 02 02 0x1033 0x00E0 XX Acpi(HWP0002,PNP0A03,0)/Pci(2|2)
00 0F 01 00 0x1077 0x2422 04 Acpi(HWP0002,PNP0A03,300)/Pci(1|0)
00 14 01 00 0x1000 0x0054 01 Acpi(HWP0002,PNP0A03,400)/Pci(1|0)
00 14 02 00 0x8086 0x1079 02 Acpi(HWP0002,PNP0A03,400)/Pci(2|0)
Press ENTER to continue, 'q' to exit:
00 14 02 01 0x8086 0x1079 02 Acpi(HWP0002,PNP0A03,400)/Pci(2|1)
00 1E 01 00 0x1077 0x2422 05 Acpi(HWP0002,PNP0A03,600)/Pci(1|0)
00 23 01 00 0x1077 0x2422 03 Acpi(HWP0002,PNP0A03,700)/Pci(1|0)
Fast initialization: Enabled
System Wake-On-LAN: Enabled
BOOT INFORMATION
Monarch CPU:
Current Preferred
Monarch Monarch
CPU CPU
Module/ Module/
Logical Logical Warnings
------- --------- --------
0/0 0/0
AutoBoot: ON - Timeout is : 10 sec
Boottest:
Press ENTER to continue, 'q' to exit:
BOOTTEST Settings Default Variable
Selftest Setting
--------- --------------
early_cpu Run this test
late_cpu Run this test
platform Run this test
chipset Run this test
io_hw Run this test
mem_init Run this test
mem_test Run this test
LAN Address Information:
LAN Address Path
----------------- ----------------------------------------
*Mac(0024817736B Acpi(HWP0002,PNP0A03,400)/Pci(2|0)/Mac(0024817736B
Mac(0024817736B9) Acpi(HWP0002,PNP0A03,400)/Pci(2|1)/Mac(0024817736B9)
FIRMWARE INFORMATION
Press ENTER to continue, 'q' to exit:
*System Firmware A Revision: 4.11 [4842]
PAL_A: 7.31/1.08
PAL_B: 1.14
EFI Spec: 2.00
EFI Intel Drop: 14.62
EFI Build: 7.14
SAL Spec: 3.20
SAL_A: 2.00
SAL_B: 4.11
POSSE: 0.24
ACPI: 7.00
SMBIOS: 2.3.2a
System Firmware B Revision: 4.11 [4842]
BMC Revision: 5.25
IPMI: 1.00
Management Processor Revision: F.02.23
Updatable EFI Drivers:
Floating-Point Software Assistance Handler: 00000118
Broadcom Gigabit Ethernet Driver: 00090404
SCSI Bus Driver: 00000031
SCSI Disk Driver: 00000020
SCSI Tape Driver: 00000030
Usb Ohci Driver: 00000040
USB Bus Driver: 00000020
Press ENTER to continue, 'q' to exit:
USB Bot Mass Storage Driver: 00000020
Generic USB Mass Storage Driver: 00000020
* Indicates active system firmware image
WARNING AND STOP BOOT INFORMATION
CHIP REVISION INFORMATION
Chip Logical Device Chip
Type ID ID Revision
------------------- ------- ------ --------
Memory Controller 0 4032 0020
Root Bridge 0 4030 0020
Host Bridge 0000 122e 0032
Host Bridge 0001 122e 0032
HotPlug Controller 0 0 0123
Host Bridge 0002 122e 0032
Host Bridge 0003 12ee 0011
Host Bridge 0004 122e 0032
Host Bridge 0005 122e 0032
HotPlug Controller 0 0 0123
Host Bridge 0006 122e 0032
Press ENTER to continue, 'q' to exit:
Host Bridge 0007 12ee 0011
Other Bridge 0 0 0030
Other Bridge 0 0 5007
Baseboard MC 0 0 0525
SYSTEM SECURITY CONFIGURATION
Trusted Boot: Not Supported
TPM: Not Present
Shell> |
|
免费注册
发表于 2011-10-27 11:19
发表于 2011-10-27 21:52