M4000更换电源记录

znnnz

XSCF> replacefru
----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.

1. FAN        (Fan Unit)
2. PSU        (Power Supply Unit)
----------------------------------------------------------------------
Select [1,2|c:cancel] :2

----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a PSU to be replaced.

No. FRU             Status
--- --------------- ------------------
1. PSU#0           Normal
2. PSU#1           Normal
----------------------------------------------------------------------
Select [1,2|b:back] :1

You are about to replace PSU#0.
Do you want to continue?[r:replace|c:cancel] :r

Please confirm the Ready LED is not lit and that the Check LED is
blinking.
If this is the case, please replace PSU#0.
After replacement has been completed, please select[f:finish] :f

Diagnostic tests for PSU#0 have started.
[This operation may take up to 3 minute(s)]
(progress scale reported in seconds)
   0.....  30..done

----------------------------------------------------------------------
Maintenance/Replacement Menu
Status of the replaced FRU.

FRU           Status
------------- --------
PSU#0         Normal
----------------------------------------------------------------------
The replacement of PSU#0 has completed normally.[f:finish] :f

----------------------------------------------------------------------
Maintenance/Replacement Menu
Please select a type of FRU to be replaced.

1. FAN        (Fan Unit)
2. PSU        (Power Supply Unit)
----------------------------------------------------------------------
Select [1,2|c:cancel] :c

119beyond

按    手册    来

wait空白

不错。不过没啥含量。。

围观团团长

还记得我第一次换M4000电源的时候   声音突然变小   我以为机器宕了，吓死我了。