这样的启动信息没啥问题吧？但机器一段时间会死掉

puwei23

以下为启动信息，这台utra10现在大概1周就会死一次，网络不同，键盘都没有反映，日志里面差不多就这些，太奇怪了。各位有什么看法？\r\nMar  5 10:27:26 nl9800server genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_108528-13 64-\r\nbit\r\nMar  5 10:27:26 nl9800server genunix: [ID 913631 kern.notice] Copyright 1983-2001 Sun Microsystems, Inc.  All r\r\nights reserved.\r\nMar  5 10:27:26 nl9800server genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:14:51:8a\r\nMar  5 10:27:26 nl9800server unix: [ID 389951 kern.info] mem = 262144K (0x10000000)\r\nMar  5 10:27:26 nl9800server unix: [ID 930857 kern.info] avail mem = 251453440\r\nMar  5 10:27:26 nl9800server rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi\r\n 440MHz)\r\nMar  5 10:27:26 nl9800server rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA 0x1f 0x0\r\nMar  5 10:27:26 nl9800server genunix: [ID 936769 kern.info] pcipsy0 is /pci@1f,0\r\nMar  5 10:27:26 nl9800server pcipsy: [ID 370704 kern.info] PCI-device: pci@1,1, simba0\r\nMar  5 10:27:26 nl9800server genunix: [ID 936769 kern.info] simba0 is /pci@1f,0/pci@1,1\r\nMar  5 10:27:26 nl9800server pcipsy: [ID 370704 kern.info] PCI-device: pci@1, simba1\r\nMar  5 10:27:26 nl9800server genunix: [ID 936769 kern.info] simba1 is /pci@1f,0/pci@1\r\nMar  5 10:27:42 nl9800server simba: [ID 370704 kern.info] PCI-device: ide@3, uata0\r\nMar  5 10:27:42 nl9800server genunix: [ID 936769 kern.info] uata0 is /pci@1f,0/pci@1,1/ide@3\r\nMar  5 10:27:42 nl9800server uata: [ID 114370 kern.info] dad0 at pci1095,6460\r\nMar  5 10:27:42 nl9800server uata: [ID 347839 kern.info]  target 0 lun 0\r\nMar  5 10:27:42 nl9800server genunix: [ID 936769 kern.info] dad0 is /pci@1f,0/pci@1,1/ide@3/dad@0,0\r\nMar  5 10:27:43 nl9800server dada: [ID 365881 kern.info]        <ST320011A                 cyl 38790 alt 2 hd 1\r\n6 sec 63>;\r\nMar  5 10:27:43 nl9800server swapgeneric: [ID 308332 kern.info] root on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a fsty\r\npe ufs\r\nMar  5 10:27:43 nl9800server simba: [ID 370704 kern.info] PCI-device: ebus@1, ebus0\r\nMar  5 10:27:43 nl9800server ebus: [ID 521012 kern.info] power0 at ebus0: offset 14,724000\r\nMar  5 10:27:43 nl9800server genunix: [ID 936769 kern.info] power0 is /pci@1f,0/pci@1,1/ebus@1/power@14,724000\r\nMar  5 10:27:43 nl9800server ebus: [ID 521012 kern.info] su0 at ebus0: offset 14,3083f8\r\nMar  5 10:27:43 nl9800server genunix: [ID 936769 kern.info] su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8\r\nMar  5 10:27:43 nl9800server ebus: [ID 521012 kern.info] su1 at ebus0: offset 14,3062f8\r\nMar  5 10:27:43 nl9800server genunix: [ID 936769 kern.info] su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8\r\nMar  5 10:27:43 nl9800server simba: [ID 370704 kern.info] PCI-device: SUNW,m64B@2, m640\r\nMar  5 10:27:43 nl9800server genunix: [ID 936769 kern.info] m640 is /pci@1f,0/pci@1,1/SUNW,m64B@2\r\nMar  5 10:27:43 nl9800server m64: [ID 308573 kern.info] m64#0: 1152x900, 4M mappable, rev 4750.7c\r\nMar  5 10:27:43 nl9800server unix: [ID 987524 kern.info] cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x91\r\nclock 440 MHz)\r\nMar  5 10:27:44 nl9800server ebus: [ID 521012 kern.info] se0 at ebus0: offset 14,400000\r\nMar  5 10:27:44 nl9800server genunix: [ID 936769 kern.info] se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000\r\nMar  5 10:27:45 nl9800server hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found\r\nMar  5 10:27:45 nl9800server simba: [ID 370704 kern.info] PCI-device: network@1,1, hme0\r\nMar  5 10:27:45 nl9800server genunix: [ID 936769 kern.info] hme0 is /pci@1f,0/pci@1,1/network@1,1\r\nMar  5 10:27:46 nl9800server genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t0d0s4 size 1000 MB\r\nMar  5 10:27:48 nl9800server hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.\r\nMar  5 10:27:48 nl9800server hme: [ID 517527 kern.info] SUNW,hme0 :    10 Mbps Half-Duplex Link Up\r\nMar  5 10:27:50 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: devinfo0\r\nMar  5 10:27:50 nl9800server genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0\r\nMar  5 10:27:57 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: tod0\r\nMar  5 10:27:57 nl9800server genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0\r\nMar  5 10:27:57 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: pm0\r\nMar  5 10:27:57 nl9800server genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0\r\nMar  5 10:27:58 nl9800server cssd: [ID 602758 daemon.notice] starting cs00.sh (pid#242)\r\nMar  5 10:27:58 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: vol0\r\nMar  5 10:27:58 nl9800server genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0\r\nMar  5 10:27:58 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: fcode0\r\nMar  5 10:27:58 nl9800server genunix: [ID 936769 kern.info] fcode0 is /pseudo/fcode@0\r\nMar  5 10:27:59 nl9800server scsi: [ID 193665 kern.info] sd0 at uata0: target 2 lun 0\r\nMar  5 10:27:59 nl9800server genunix: [ID 936769 kern.info] sd0 is /pci@1f,0/pci@1,1/ide@3/sd@2,0\r\nMar  5 10:28:01 nl9800server ebus: [ID 521012 kern.info] fd0 at ebus0: offset 14,3023f0\r\nMar  5 10:28:01 nl9800server genunix: [ID 936769 kern.info] fd0 is /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0\r\nMar  5 10:28:06 nl9800server simba: [ID 370704 kern.info] PCI-device: SUNW,m64B@2, m640\r\nMar  5 10:28:06 nl9800server genunix: [ID 936769 kern.info] m640 is /pci@1f,0/pci@1,1/SUNW,m64B@2\r\nMar  5 10:28:06 nl9800server m64: [ID 308573 kern.info] m64#0: 1152x900, 4M mappable, rev 4750.7c\r\nMar  5 10:28:07 nl9800server pseudo: [ID 129642 kern.info] pseudo-device: pm0\r\nMar  5 10:28:07 nl9800server genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0

iricyan

建议：\r\n1 POST最大化自检一次。\r\n2 SUNVTS检测\r\n3 hang的时候，STOP＋A有效吗？有， sync得到core文件先。

puwei23

hang的时候，STOP＋A无效，键盘都没有反映了。\r\n自检、检测怎么做？没做过\r\n能否大概说一下，我自己找找文档看看\r\n呵呵