U60的报警加错误??

xiaorui15

ok boot cdrom
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
SunOS Release 5.9 Version Generic_112233-05 64-bit
Copyright 1983-2002 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: /pci@1f,4000/scsi@3/sd@0,0 (sd0):
Corrupt label - label checksum failed

Configuring /dev and /devices
WARNING: [AFT0] Sticky Softerr encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002

WARNING: [AFT0] Sticky Softerror encountered on Memory Module U1002
然后就开始配IP等等,但到硬盘的时候,就变成这样了,本来自代的硬盘是这种情况,本来以为硬盘坏了,但换了一个还是这种情况,请帮忙呀
警告 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq







        查到一个或多个磁盘，但是
        存在下列问题之一:

         >; 硬件失败

         >; 未格式化的磁盘。








qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
     F2_确定

sun_os

是不是内存的问题呀

sun_os

是不是内存的问题呀

xiaorui15

行吧,我换来看看,请关注一下,另外两个问题

李哲

你查看一个或多个硬盘时，这个进程是其实是在内存中。所以如果你的内存有问题的话。当然进程也会出问题

race

[quote]原帖由 "李哲"]你查看一个或多个硬盘时，这个进程是其实是在内存中。所以如果你的内存有问题的话。当然进程也会出问题[/quote 发表：


小笨蛋，机器还能起来吗？起来后出问题，机器不早就崩溃了吗？

李哲

可是看信息报的全都是内存模块的错，而他在查看硬盘时，机子也无法正确识别硬盘。他的内存肯定是有问题的。

pengtao_hlp

换下内存吧。要不把坏的那组拔下来！

xiaorui15

谢谢位,我在看看,,,