关于PDLM

wushengwei

思科路由器运用PDLM与NBAR来限制BT下载请问以下几条配置命令是什么意思？\r\nclass-map match-all bittorrent \r\nmatch protocol bittorrent \r\n! \r\n! \r\npolicy-map bittorrent-policy \r\n\r\n\r\nclass bittorrent \r\ndrop

charlesc

用NBAR（非常好用）\r\n但是重新启动需要重新调用 tftp://130.130.122.123/bittorrent.pdlm 这个文件，所以还是用flash卡比较好。如果不调用文件，那就会发生没有match protocol bittorrent \r\n\r\nip nbar pdlm tftp://130.130.122.123/bittorrent.pdlm \r\n\r\nclass-map match-all bit\r\nmatch protocol bittorrent \r\n\r\npolicy-map limit-bit\r\nclass bit\r\npolice cir 240000\r\nconform-action transmit\r\nexceed-action drop \r\n\r\n\r\npolice cir 8000\r\nconform-action transimit\r\nexceed-action drop \r\n\r\ninterface fastethernet 0/1\r\nservice-policy input limit-bit (下载）\r\nservice-policy output limit-bit(上传）\r\nip nat outside \r\n\r\ninterface fastethernet 0/0\r\nip nat inside \r\n\r\nip nat inside list 1 pool nbar-pool overload\r\naccess-list 1 permit any \r\nip nat pool nbar-pool \r\n\r\n\r\n8000 < 1k\r\n80000 < 4k 5k, 5k 5k \r\n160000 < 16K, 13K \r\n240000 <=22k, 24K \r\n800000 <=80K <100K\r\nZT

wonderliang

我记得可以PDLM导入路由器，导完之后就不用TFTP了