求Cisco Catalyst 4000配置文档？

zjz2002zjz

求Cisco Catalyst 4000配置文档，高手帮忙，zjz20000@sina.com.谢谢！

wonderliang

和其他交换机一样配置，到cisco找个set命令集文档

海天一色

version 12.0\r\nno service pad\r\nservice timestamps debug uptime\r\nservice timestamps log uptime\r\nno service password-encryption\r\n!\r\nhostname cisco4000\r\nip subnet-zero\r\ninterface FastEthernet1\r\n no ip address\r\n ip broadcast-address 0.0.0.0\r\n no ip directed-broadcast\r\n no ip route-cache cef\r\n shutdown\r\n!\r\ninterface GigabitEthernet1\r\n no ip address\r\n ip broadcast-address 0.0.0.0\r\n no ip directed-broadcast\r\n!\r\ninterface GigabitEthernet1.600\r\n description Internet\r\n encapsulation dot1Q 600\r\n ip address 10.1.255.2 255.255.255.252\r\n ip broadcast-address 10.1.255.0\r\n ip access-group 101 in\r\n no ip directed-broadcast\r\n!\r\ninterface GigabitEthernet1.601\r\n description OA\r\n encapsulation dot1Q 601\r\n!\r\ninterface GigabitEthernet1.602\r\n description Video\r\n encapsulation dot1Q 602\r\n ip address 10.1.255.10 255.255.255.252\r\n ip broadcast-address 10.1.255.8\r\n no ip directed-broadcast\r\n!\r\ninterface GigabitEthernet2\r\n no ip address\r\n ip broadcast-address 0.0.0.0\r\n no ip directed-broadcast\r\n shutdown\r\n!\r\ninterface GigabitEthernet3\r\n no ip address\r\n ip broadcast-address 0.0.0.0\r\n no ip directed-broadcast\r\n no negotiation auto\r\n!\r\ninterface GigabitEthernet3.1\r\n description connect to second floor in vlan2\r\n encapsulation dot1Q 2\r\n ip address 10.1.3.1 255.255.255.0\r\n ip broadcast-address 10.1.3.0\r\n ip access-group 120 in\r\n no ip directed-broadcast\r\n!\r\ninterface GigabitEthernet3.2\r\n description connect to pre_hall in vlan3\r\n encapsulation dot1Q 3\r\n ip address 10.1.4.1 255.255.255.0\r\n ip broadcast-address 10.1.4.0\r\n ip access-group 120 in\r\n no ip directed-broadcast\r\n!\r\ninterface GigabitEthernet4\r\n no ip address\r\n ip broadcast-address 0.0.0.0\r\n no ip directed-broadcast\r\n no negotiation auto\r\n!\r\nip classless\r\nip route 0.0.0.0 0.0.0.0 10.1.1.1\r\n!\r\nline con 0\r\n transport input none\r\nline aux 0\r\nline vty 0 4\r\n password htys\r\n login\r\n!\r\nend