高手请进!

ttqiuzhi

我在做SAMBA的时候,我不知道我的系统是否使用了PAM?请问如何判断?
使用RPM -Q PAM查询,系统反馈PAM-0.75-48已经安装.并且查看/etc/pam.d/也有配置SAMBA文件.
[root@myserver pam.d]# cat samba
#%PAM-1.0
auth sufficient /lib/security/pam_winbind.so
auth required pam_nologin.so
auth required pam_stack.so service=system-auth
account sufficient /lib/security/pam_winbind.so
account required pam_stack.so service=system-auth
session required pam_stack.so service=system-auth
password required pam_stack.so service=system-auth
分别使用wbinfo -u以及wbinfo -g命令查看,能够成功返回域中的组以及用户名.
只是,我在域当中的windows xp工作站使用域帐号登录域后,打开这台SAMBA服务器,却仍然向我索要密码.为什么呢?
经检查需要的库、nsswitch.conf、/etc/pam.d/samba、/etc/samba/smb.conf都有正确配置。
只是我怀疑PAM功能没能正常投入使用。
使用rpm -e pam
error: Failed dependencies:
libpam.so.0 is needed by (installed) coreutils-4.5.3-19
libpam.so.0 is needed by (installed) util-linux-2.11y-9
libpam.so.0 is needed by (installed) cyrus-sasl-2.1.10-4
libpam.so.0 is needed by (installed) libuser-0.51.7-1
libpam.so.0 is needed by (installed) passwd-0.68-3
libpam.so.0 is needed by (installed) usermode-1.67-2
libpam.so.0 is needed by (installed) cyrus-sasl-plain-2.1.10-4
libpam.so.0 is needed by (installed) nss_ldap-202-5
libpam.so.0 is needed by (installed) ppp-2.4.1-10
libpam.so.0 is needed by (installed) sudo-1.6.6-3
libpam.so.0 is needed by (installed) openssh-server-3.5p1-6
libpam.so.0 is needed by (installed) cups-1.1.17-13
libpam.so.0 is needed by (installed) samba-3.0.7-1
libpam_misc.so.0 is needed by (installed) coreutils-4.5.3-19
libpam_misc.so.0 is needed by (installed) util-linux-2.11y-9
libpam_misc.so.0 is needed by (installed) libuser-0.51.7-1
libpam_misc.so.0 is needed by (installed) passwd-0.68-3
libpam_misc.so.0 is needed by (installed) usermode-1.67-2
pam >;= 0.66-12 is needed by (installed) coreutils-4.5.3-19
pam >;= 0.73 is needed by (installed) authconfig-4.3.4-1
pam >;= 0.75-43 is needed by (installed) authconfig-4.3.4-1
pam >;= 0.74-17 is needed by (installed) kudzu-0.99.99-1
pam >;= 0.66-5 is needed by (installed) SysVinit-2.84-13
pam >;= 0.66-4 is needed by (installed) util-linux-2.11y-9
pam >;= 0.59 is needed by (installed) passwd-0.68-3
pam >;= 0.75-37 is needed by (installed) usermode-1.67-2
pam >;= 0.66-4 is needed by (installed) kbd-1.08-4
pam >;= 0.72-22 is needed by (installed) gpm-1.19.3-27
pam is needed by (installed) samba-3.0.7-1
pam = 0.75-48 is needed by (installed) pam-devel-0.75-48
/etc/pam.d/system-auth is needed by (installed) util-linux-2.11y-9
/etc/pam.d/system-auth is needed by (installed) passwd-0.68-3
/etc/pam.d/system-auth is needed by (installed) usermode-1.67-2
/etc/pam.d/system-auth is needed by (installed) kbd-1.08-4
/etc/pam.d/system-auth is needed by (installed) ppp-2.4.1-10
/etc/pam.d/system-auth is needed by (installed) sudo-1.6.6-3
/etc/pam.d/system-auth is needed by (installed) openssh-server-3.5p1-6

请帮忙分析一下。谢谢
[img][/img][img][/img]