UNIX 4.0F CDE 问题！

david9000

我的系统每次引导图形都起不来，请问是怎么回事，该怎么解决呀？
UNIX 4.0F   500AU   
>;>;>;boot dka0

进入系统后#xetup CDE 还是起不来，请各位帮我看看解决一下。         
   
# sizer -v
Digital UNIX V4.0F  (Rev. 1229); Fri Apr  4 05:29:25 CST 2003
#
# who
root        console     Mar 25 03:45
root        ttyp0       Mar 25 03:46
# scu show edt

CAM Equipment Device Table (EDT) Information:

    Device: CD-ROM XM-6302B Bus: 0, Target: 0, Lun: 0, Type: Read-Only Direct Ac
cess
    Device: DDYS-T36950N Bus: 2, Target: 0, Lun: 0, Type: Direct Access
    Device: SDT-10000  Bus: 2, Target: 4, Lun: 0, Type: Sequential Access

# file /dev/rrz*c
/dev/rrz0c:     character special (8/2) EIDE #0 CD-ROM X disk #0 (SCSI ID #0) (
/dev/rrz16c:    character special (8/32770) SCSI #2 DDYS-T36 disk #128 (SCSI ID
/dev/rrz17c:    character special (8/33794)
# xetup
xetup: not found
# xsetup

X Display Manager Setup:
With Digital UNIX(tm) 4.0, you have a choice between:

cde:
    This option provides you with the Common Desktop Environment (CDE).
    CDE is an industry standard for desktop on systems running UNIX(tm)
    and has replaced XDM as the default user interface for Digital UNIX(tm)
    on all but minimum platforms.

xdm:
    This is the standard X11 login manager.  This manager was the default
    login manager of the previous Digital UNIX releases. Selecting this
    choice restores XDM behavior as the default.

You are currently configured to use cde.

Which windowing environment should be used (cde/xdm)? [cde] cde

You have chosen cde. Is this correct? (y/n) [yes] y


This change will be in effect at next System Reboot,
unless you wish to stop current X Display Manager.

You have chosen cde. Is this correct? (y/n) [yes] y


This change will be in effect at next System Reboot,
unless you wish to stop current X Display Manager.

Do you wish to stop your current X display manager
and start cde now? (y/n) [no] y



****************************************************************
* Stopping your current X Display Manager will terminate ALL   *
* X Applications on the local display and will also terminate  *
* ALL X Login Sessions served by this host whether local or    *
* on remote X Terminals.                                       *
****************************************************************

        Would you like to continue? (y/n) [no] y

#reboot

飞天二狭

#/usr/dt/bin/dtlogin -daemon启动一下看是否正常!

吹拂的晨风

>;>;>;show console

david9000

ＵＮＩＸ　４.０Ｆ　没有这个命令呀！
＂#/usr/dt/bin/dtlogin -daemon＂


＞＞＞show console g

这样应该可以吧．

飞天二狭

那是不可能没有这个命令的。

david9000

飞天老兄：我在公司试过了确实是提示没有此命令，我在／ＵＳＲ／ＳＢＩＮ下面＃ＬＳ　Ｄ＊也没有这个命令呀！是否还有其它的问题存在呀？多谢了，方便给我留一个联系方式吗，还有一些问题需要请教老兄（ＱＱ什么的）！谢了！！！

飞天二狭

这有可能是你的问题所在啊。

david9000

那该怎么解决呢？是不是什么文件被删除了，可以查到以前系统的操作吗？比如修改了什么文件；新建了什么文件－－－

飞天二狭

对系统做过备份吗？如果备份过，那恢复一下就行了。
另外，你可以参照其它其他机器，看看：
比如：ps -eaf|grep dtlogin|grep root
看看有没有这个进程，这个进程就是启动桌面的重要进程。

suzhen

看看显卡；换个PCI槽位。