mrtg 报错！

linuxxx

[root@ftpserver bin]# env LANG=C ./mrtg /etc/mrtg.cfg
WARNING: Could not match host:'public@218.27.88.254:' ref:'Ip' key:'21.1.2.0.0.0.0'
WARNING: Could not match host:'public@218.27.88.254:' ref:'Ip' key:'21.1.8.0.0.0.0'
ERROR: Target[218.27.88.254_21.1.2.0.0.0.0][_IN_] ' $$target[0]{$mode} ' did not eval into defined data
ERROR: Target[218.27.88.254_21.1.2.0.0.0.0][_OUT_] ' $$target[0]{$mode} ' did not eval into defined data
WARNING: Skipping Update of 218.27.88.254_21.1.2.0.0.0.0, inlast is not defined
WARNING: Skipping Update of 218.27.88.254_21.1.2.0.0.0.0, outlast is not defined
ERROR: Target[218.27.88.254_21.1.8.0.0.0.0][_IN_] ' $$target[1]{$mode} ' did not eval into defined data
ERROR: Target[218.27.88.254_21.1.8.0.0.0.0][_OUT_] ' $$target[1]{$mode} ' did not eval into defined data
WARNING: Skipping Update of 218.27.88.254_21.1.8.0.0.0.0, inlast is not defined
WARNING: Skipping Update of 218.27.88.254_21.1.8.0.0.0.0, outlast is not defined
[root@ftpserver bin]#


什么原因？

xuhehao

vi /etc/snmp/snmpd.conf
rocommunity mrtg

linuxxx

改完后重新启动 snmpd    [OK]

但是执行
env LANG=C ./mrtg /etc/mrtg.cfg
问题依旧
能推荐一个完整的文档吗？

linuxxx

snmpd.conf


# First, map the community name "public" into a "security name"

#       sec.name  source          community
com2sec notConfigUser  default       public

rocommunity mrtg
####
# Second, map the security name into a group name:

#       groupName      securityModel securityName
group   notConfigGroup v1           notConfigUser
group   notConfigGroup v2c           notConfigUser

####
# Third, create a view for us to let the group have rights to:

# Make at least  snmpwalk -v 1 localhost -c public system fast again.
#       name           incl/excl     subtree         mask(optional)
#view    systemview    included   .1.3.6.1.2.1.1
#view    systemview    included   .1.3.6.1.2.1.25.1.1
view mib2 included .iso.org.dod.internet.mgmt.mib-2 fc

####
# Finally, grant the group read-only access to the systemview view.

#       group          context sec.model sec.level prefix read   write  notif
access  notConfigGroup ""      any       noauth    exact  mib2 none none

xuhehao

精华区有一篇mrtg的安装教程，自己参考一下

linuxxx

我就是参考哪个弄的

linuxxx

找到原因了，原来是这样执行的。
./cfgmaker --global "WorkDir: /usr/local/apache/htdocs/mrtg" --global "Options[_]: growright,bits" -ifref=ip --output /etc/mrtg.cfg public@218.27.88.254

改成
./cfgmaker --global "WorkDir: /usr/local/apache/htdocs/mrtg" --global "Options[_]: growright,bits" -ifref=ip --output /etc/mrtg.cfg public@localhost
就好了。

为什么用ip不好使呢？

xuhehao

原帖由 "linuxxx" 发表：
right,bits" -ifref=ip --output /etc/mrtg.cfg public@localhost
就好了。

为什么用ip不好使呢？

我用IP灭问题的说。。