- 论坛徽章:
- 0
|
本帖最后由 dooza 于 2010-11-30 22:02 编辑
试试：
ftp://ftp.sco.com/pub/unixware7/714/drivers/mega.803a
官方链接：http://wdb1.sco.com/kb/showta?taid=125841&sid=
内容如下：
Dell Raid Adapters Driver Info
SCO OpenServer / SCO UnixWare
The purpose of this article is to briefly describe what
Dell hardware has been certified on SCO platforms and to
provide the driver locations for the Perc family of raid
controllers.
The following list shows the entire line or SCSI-RAID Perc
adapters. Please note that the Perc II and Perc 2 controllers have
reached the end of life.
They are included here for reference purposes only.
Please note:
S = Single Channel
D = Dual Channel
i = Integrated
c = PCI Card
ROMB = Raid on mother board (same as "i" above)
This following list includes both PCI based adapters and onboard chipsets.
SCSI-RAID ADAPTER BTLD/HBA
==========================================================
Perc II PCI 2 Channel (AMI) (first generation) amird/mega
Perc2 PCI 4 Channel (Adaptec/DELL) percraid
Perc2/SC PCI Single Channel (AMI) amird/mega
Perc2/DC PCI Dual Channel (AMI) amird/mega
Perc3/DC PCI Dual Channel (LSI) 1600 amird/mega
Perc3/SC PCI Single Channel (LSI) 1600 amird/mega
Perc3/QC PCI 4 Channel (LSI) 1600 amird/mega
Perc4/DC PCI Dual Channel (LSI) perc/perc
Perc4/Di PCI Dual Channel (LSI) amird/mega
Perc4/SC PCI 4 Channel (LSI) amird/mega
Perc4e PCI-X 2/4 Channel (LSI) amird/mega
Perc5i PCI-X megasas(6.0.0/7.1.4 only)
Perc5e PCI-X megasas(6.0.0/7.1.4 only)
Perc6i PCI-E megasas(6.0.0/7.1.4 only)
Cerc6i PCI-E megasas(6.0.0/7.1.4 only)
Perc6e PCI-E megasas(6.0.0/7.1.4 only)
H200 PCI-E megasas 4.05 (6.0.0/7.1.4 only)
H700 PCI-E megasas 4.05 (6.0.0/7.1.4 only)
H800 PCI-E megasas 4.05 (6.0.0/7.1.4 only)
Note: Dell also offers the following on some models that
often get confused with the PERC controllers:
DELL SAS 5iR PCI-E lsil/mpt
DELL SAS/5E PCI-E lsil/mpt
DELL SAS 6iR PCI-E lsil/mpt
NOTE:
For the Dell Perc 4 Raid Adapters you need to ensure that the
Adapter BIOS setting for Emulation mode is set to Mass Storage for
the adapter to be recognised by the amird and mega Adapter drivers.
The Emulation Mode is found under
Objects -> Adapter -> Emulation
within the Dell Perc 4 BIOS. For more information on how to
do this please see your Dell PowerEdge Expandable RAID Controller
User's Guide.
The systems below have been certified on SCO products.
Under the system name are the controllers which came with
that machine stock and which were used in certifications.
Please visit the SCO compatible hardware web page for the most
up to date information about all certified DELL platforms and
products. http://www.sco.com/chwp
Poweredge 2400/1500
Perc2/Si Onboard Single Channel (Adaptec/Dell chipset)
Poweredge 2500/2550
Perc3/Di Onboard Dual Channel (Adaptec/Dell chipset)
Poweredge 4600/2650/1650
Perc/3Di Onboard Dual Channel (Adaptec/Dell chipset)
Poweredge 6650/6600
No Onboard Raid, Onboard AIC7892 SCSI or PCI Perc3/DC 3/QC available.
Poweredge 2600/1750
Perc4/Di 4/DC 4/QC Onboard Raid (LSI/Dell chipset)
Poweredge 1800/1850/2800/3850
Perc4e ROMB (LSI Chipset)
Poweredge 6850
Perc5i SAS (LSI Chipset)
Poweredge 1900/1950/2900/2950
Perc 5i or Dell SAS 5/iR (LSI Chipset)
Poweredge 1950III/2900III/2950III
Perc 6i or Dell SAS 6/iR or Dell SAS/5E (LSI Chipset)
Poweredge R200/R410/R610/R710
H200, H700, H800, Perc 5/E, Perc 6i, Perc 6/E or Dell SAS 6/iR
Poweredge M600/M605
Dell SAS 6/iR or Cerc6i
Poweredge T110/T300/T310/T410/T610/T710
H200, H700, H800, Perc 5/E, Perc 6i, Perc 6/E or Dell SAS 6/iR
Driver Downloads
================
perc2 & perc3 controllers and drivers have been obsoleted by Dell.
Please contact your SCO support provider for the correct drivers as
the links below are not functional and are listed for legacy purpose only.
Perc2, Perc2/Si; Perc3/Di
Both platforms: ftp://ftp.dell.com/scsi-raid/UxPer3di.exe
Perc II, Perc2/DC, Perc3/SC 3/DC 3/QC
Openserver: ftp://ftp.dell.com/scsi-raid/percsco.exe
UnixWare: ftp://ftp.dell.com/scsi-raid/percunx.exe
Perc4DC/Di
Openserver:
ftp://ftp.sco.com/pub/openserver5/507/drivers/amird225/
Unixware/Openserver 6:
ftp://ftp.sco.com/pub/unixware7/714/drivers/mega.803a/
The Perc4/Di can also be set to use SCSI mode for Ultra U320
SCSI operation. The Dell/LSI Chipset is: LSI53C1030/LSI53C1020
OpenServer:
ftp://ftp.sco.com/pub/openserver5/drivers/OSR507/btld/lsil/
UnixWare/OpenServer 6:
ftp://ftp.sco.com/pub/openserver6/600/drivers/mpt_810
Perc4/SC
Openserver:
ftp://ftp.sco.com/pub/openserver5/507/drivers/amird225/
Unixware/OpenServer 6:
ftp://ftp.sco.com/pub/unixware7/714/drivers/mega.803a/
Perc4e - PCI-X ROMB
OpenServer5:
ftp://ftp.sco.com/pub/openserver5/507/drivers/amird225/
Note: Please pay special attention to the README for this
driver. The bus mapping has changed and a special bootstring
is required to get the root hard disk to be seen properly.
Unixware/OpenServer 6:
ftp://ftp.sco.com/pub/unixware7/714/drivers/mega.803a/
Perc5i/5e/6i/6e and Cerc6i:
Unixware 7.1.4 and Openserver6 - The driver is available here:
ftp://ftp.sco.com/pub/openserver6/600/drivers/megasas.1.1
Dell SAS 5/iR & 6/iR:
Unixware 7.1.4 and Openserver6 - The driver is available here:
ftp://ftp.sco.com/pub/openserver6/600/drivers/mpt_810
Dell H200, H700, H800:
Unixware 7.1.4 and Openserver6 - The driver is available here:
http://www.lsi.com/DistributionS ... _SCO_HWR_Driver.zip
As a final note, Dell includes two different onboard NICs
one is the Broadcom Gigbit NIC and the other is the Intel
Gigabit NIC. The drivers for those chipsets are available from the
Broadcom and SCO Web/FTP sites.
Network drivers for Dell onboard Broadcom Gigabit adapters(bnx2 and bcme)
http://broadcom.com/support/ethernet_nic/downloaddrivers.php
(NetXtreme Server = bcme; NetXtremeII = bnx2)
Network Drivers for Dell Onboard INTEL Gigabit adapters(eeG/e1000)
ftp://ftp.sco.com/pub/openserver5/drivers/OSR507/network/eeG/
http://www.sco.com/support/update/download/release.php?rid=401 |
|
免费注册
发表于 2010-11-29 14:14
发表于 2010-11-30 11:27
