恳求：hp openview NMM 6.2 for nt/2000的问题？

quake_3

操作系统平台：
   win2000 adv sp5，jre 1.4.1，ie 6.0sp1，snmp服务安装。
安装的管理软件：hp openview nmm 6.2 安装过程就出现一次错误，不过重新启动以后可以使用，但是不能弹出输入password的对话框，察看服务状态出现一个错误如下：
   ovrequestd not running exit(0)
其中安装过程中的错误log输出：
   Hewlett-Packard Network Node Manager 6.20
8-30-2005 12:23:41
Windows NT version: 5.0
Service Pack: Service Pack 4
Microsoft IIS version: 5.0
Domain: lxy.mtn
SearchList:  <DNS Search List Not Defined>;
Hostname: vod3
NameServer:  <DNS Nameserver Not Defined>;
IPX networking is not installed on the target system.
NOTE:  You must install IPX networking if youwant to discover and manage IPX devices.  If youchoose not to install the IPX networking, you willonly discover IP devices.  To install IPX support,follow the instructions in the Release Notes (README)in the section "IPX Pre-Installation Instructions".Setup is unable to determine the default router for this system.  This may inhi
bit or slow down the network discovery process in some cases, but is not requir
ed to continue.
是否确定(Y/N)?处理的目录: C:\Program Files\HP OpenView\NNM
处理的目录: C:\Program Files\HP OpenView\NNM\log
处理的文件: C:\Program Files\HP OpenView\NNM\OVNNMRT.isu
处理的文件: C:\Program Files\HP OpenView\NNM\yes.txt
处理的文件: C:\Program Files\HP OpenView\NNM\log\setup.log
C:\WINNT\system32\cmd.exe /C CALL cacls "C:\Program Files\HP OpenView\NNM" /T /C /P Everyone:F < "C:\Program Files\HP OpenView\NNM\yes.txt" >;>; "C:\Program Files\HP OpenView\NNM\log\setup.log" returned 0
E:\newconfig\OVNNM-RUN\Regsvr32.exe /s "C:\Program Files\HP OpenView\NNM\bin\dmiExplorer\ActiveDom.ocx" returned 0
E:\newconfig\OVNNM-RUN\Regsvr32.exe /s "C:\Program Files\HP OpenView\NNM\bin\dmiExplorer\Dmi2eX.ocx" returned 0
E:\newconfig\OVNNM-RUN\Regsvr32.exe /s "C:\Program Files\HP OpenView\NNM\bin\dmiExplorer\DmiEdit.ocx" returned 0
E:\newconfig\OVNNM-RUN\Regsvr32.exe /s "C:\Program Files\HP OpenView\NNM\bin\dmiExplorer\DmiList.ocx" returned 0
E:\newconfig\OVNNM-RUN\Regsvr32.exe /s "C:\Program Files\HP OpenView\NNM\bin\dmiExplorer\DmiTree.ocx" returned 0
Regedit.exe /s /y E:\newconfig\OVNNM-RUN\conf\dmirpc.reg returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovnnmInstallLic.exe" E:\newconfig\OVMIN\conf\license.key returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovspmd.exe" install returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovwdb.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovwdb.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovuispmd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovuispmd.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe pmd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\pmd.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovtrapd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovtrapd.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovalarmsrv.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovalarmsrv.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovsessionmgr.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovsessionmgr.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovactiond.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovactiond.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovtopmd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovtopmd.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe netmon.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\netmon.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe snmpCollect.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\snmpCollect.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovrequestd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovrequestd.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovdbcheck.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovdbcheck.lrf" returned 0
E:\newconfig\OVMIN\mergeLrf.exe ovcapsd.lrf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovaddobj.exe" "C:\Program Files\HP OpenView\NNM\lrf\ovcapsd.lrf" returned 0
"C:\Program Files\HP OpenView\NNM\bin\Perl\bin\perl.exe" E:\newconfig\OVNNM-RUN\setupAddlFilters.ovpl "C:\Program Files\HP OpenView\NNM"\bin "C:\Program Files\HP OpenView\NNM\log\setup.log" returned 0
setupIIS.vbs: Setting up IIS for OpenView in C:\Program Files\HP OpenView\NNM ...
Setup of IIS Successful.
cscript.exe //b "E:\newconfig\OVWWW-FW\setupIIS.vbs" "C:\Program Files\HP OpenView\NNM" "C:\Program Files\HP OpenView\NNM\log\setup.log" returned 0
C:\PROGRA~1\HPOPEN~1\NNM\bin\ovdbrun.exe -c "C:\PROGRA~1\HPOPEN~1\NNM\DATABA~1\analysis\default" -U ovdb -P ovdb -C ovdb -x exit -x hide returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwcfggetset.exe" -file C:\PROGRA~1\HPOPEN~1\NNM\conf\analysis\ovdw.conf -s : -set "user: ovdb" returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwcfggetset.exe" -file C:\PROGRA~1\HPOPEN~1\NNM\conf\analysis\ovdw.conf -s : -set "password: ovdb" -encrypt 1 returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwcfggetset.exe" -file C:\PROGRA~1\HPOPEN~1\NNM\conf\analysis\ovdw.conf -s ": @" -set "dbname: ovdbrun" returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwcfggetset.exe" -file C:\PROGRA~1\HPOPEN~1\NNM\conf\analysis\ovdw.conf -s ": @" -set "db: yes" returned 0
C:\PROGRA~1\HPOPEN~1\NNM\bin\ovdbrun.exe -c "C:\PROGRA~1\HPOPEN~1\NNM\DATABA~1\analysis\default" -s "install,HP OpenView NNM Embedded DB,C:\PROGRA~1\HPOPEN~1\NNM\bin\ovdbrun.exe -sstart -cC:\PROGRA~1\HPOPEN~1\NNM\DATABA~1\analysis\default" -x hide returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovstart.exe" ovdbcheck returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwquery.exe" -v -file "C:\Program Files\HP OpenView\NNM\conf\analysis\sqlScripts\tables_trend.solid" returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwquery.exe" -v -file "C:\Program Files\HP OpenView\NNM\conf\analysis\sqlScripts\tables_topo.solid" returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwquery.exe" -v -file "C:\Program Files\HP OpenView\NNM\conf\analysis\sqlScripts\tables_event.solid" returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdwquery.exe" -v -file "C:\Program Files\HP OpenView\NNM\conf\analysis\sqlScripts\tables_common.solid" returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc1902-SNMPv2-SMI returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc1903-SNMPv2-TC returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc1906-SNMPv2-TM returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc1907-SNMPv2-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\IANAifType-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc1213-MIB-II returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc2011-IP-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc2012-TCP-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc2013-UDP-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -unload rfc2233-IF-MIB returned 4
"C:\Program Files\HP OpenView\NNM\bin\xnmloadmib.exe" -replace -load E:\snmp_mibs\Standard\rfc2863-IF-MIB returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmevents.exe" -load E:\.\newconfig\OVEVENT-MIN\conf\C\trapd.conf returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovdmi2snmp.exe" -load E:\newconfig\OVNNM-RUN\conf\hpoids.def returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovstart.exe" ovwdb returned 0
"C:\Program Files\HP OpenView\NNM\bin\ovw.exe" -fields returned 0
"C:\Program Files\HP OpenView\NNM\bin\snmpdm.exe" -install -start returned 0
"C:\Program Files\HP OpenView\NNM\bin\wpaagt.exe" -install -start returned 0
Testing initial SNMP to vod3...
system.sysObjectID.0 : OBJECT IDENTIFIER:        .iso.org.dod.internet.private.enterprises.99.1.1.3.11
"C:\Program Files\HP OpenView\NNM\bin\Perl\bin\perl.exe" E:\newconfig\OVNNM-RUN\setupCommunity.ovpl "C:\Program Files\HP OpenView\NNM\log\setup.log" "" "public" returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmcollect.exe" -loadExpr E:\.\newconfig\OVNNM-RUN\conf\mibExpr.conf returned 0
"C:\Program Files\HP OpenView\NNM\bin\xnmcollect.exe" -load E:\.\newconfig\OVNNM-RUN\conf\snmpCol.conf returned 0
Name              PID  State          Last Message(s)
pmd              6484  RUNNING        Initialization complete.
ovrequestd          -  NOT_RUNNING    - Exit(0)
hp openview process manager: Attempt to start HP OpenView services is complete.
Could not run "ovstart -c pmd ovrequestd": No such file or directory at E:\newconfig\OVRPT-RUN\setupFirstReport.ovpl line 327.

!!!!!
"C:\Program Files\HP OpenView\NNM\bin\Perl\bin\perl.exe" E:\newconfig\OVRPT-RUN\setupFirstReport.ovpl "C:\Program Files\HP OpenView\NNM"\bin "C:\Program Files\HP OpenView\NNM\log\setup.log" returned 2 (ERROR)
!!!!!

Name              PID  State          Last Message(s)
OVsPMD           7276  RUNNING        -
ovwdb            6712  RUNNING        Initialization complete.
pmd              6484  RUNNING        Initialization complete.
ovdbcheck        7260  RUNNING        Connected to embedded database.
ovactiond        6400  RUNNING        Initialization complete.
ovsessionmgr     6412  RUNNING        Initialization complete.
ovtopmd          6472  RUNNING        Connected to native database "openview".
ovalarmsrv       6460  RUNNING        Loading alarms from database
ovuispmd         6260  RUNNING        Initialized. 0 ovw clients registered.
ovcapsd           728  RUNNING        Initialization complete.
ovtrapd          6424  RUNNING        Initialization complete.
netmon           6244  RUNNING        Loading databases...
snmpCollect      6008  RUNNING        Initialization complete.
ovalarmsrv       6460  RUNNING        Initialization complete.
hp openview process manager: Attempt to start HP OpenView services is complete.

!!!!!
C:\WINNT\system32\cmd.exe /C CALL "C:\Program Files\HP OpenView\NNM\bin\ovstart.exe" -c >;>; "C:\Program Files\HP OpenView\NNM\log\setup.log" returned 1 (ERROR)
!!!!!

希望大家帮帮忙？
我初步怀疑是因为jre的版本问题，但是下载了好几个都不行，希望大家帮帮忙!!!!