论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2006-05-17 14:19 |只看该作者 |倒序浏览

RMC - Starting to Test Max Fan Speeds
RMC - Power Supplies OK
RMC - System DC is OK
RMC - System is up
RMC - System Fans OK
RMC - Powerup Complete

SROM V1.3 CPU # 00 @  1000  MHz
SROM program starting
Reloading SROM

SROM V1.4-F CPU # 00 @  1000  MHz
System Bus Speed @ 0125  MHz
SROM program starting
PCI66 bus speed check
Bcache data tests in progress
Bcache address test in progress
CPU parity and ECC detection in progress
Bcache ECC data tests in progress
Bcache TAG lines tests in progress
Memory sizing in progress
Memory configuration in progress
Testing AAR1
Memory data test in progress
Memory address test in progress
Memory pattern test in progress
Testing AAR0
Memory data test in progress
Memory address test in progress
Memory pattern test in progress
Memory thrashing test in progress
Memory initialization
Loading console
Code execution complete (transfer control)

OpenVMS PALcode V 1 . 9 8 - 4 2    , Tru64 UNIX PALcode V  1 . 9 2 - 3 3

   starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 222000 heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL

Error detected by Pchip 1
APERROR = 0080000000000022
      SERR
      PCI Address Parity Error

System Door is Open
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
2048 MB of System Memory
Testing Memory
.
Error detected by Pchip 1
APERROR = 0080000000000022
      SERR
      PCI Address Parity Error
.
Error detected by Pchip 1
APERROR = 0080000000000022
      SERR
      PCI Address Parity Error

Error detected by Pchip 1
APERROR = 0080000000000022
      SERR
      PCI Address Parity Error

..........都是同样的报错，

Error detected by Pchip 1
APERROR = 0080000000000002
      SERR
.
Error detected by Pchip 1
APERROR = 0080000000000022
      SERR
      PCI Address Parity Error

Error detected by Pchip 1
APERROR = 00f00f996d800020
      PCI Address Parity Error

probe I/O subsystem
Hose 0 - PCI bus running at 33Mhz
entering idle loop
Hose 1 - PCI bus running at 66Mhz
Hose 2 - PCI bus running at 66Mhz
Hose 3 - PCI bus running at 33Mhz

Error detected by Pchip 1
APERROR = 00a0000020000080

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR

Memory Testing and Configuration Status
  Array    Size    Base Address Intlv Mode
---------  ----------  ----------------  ----------
0    1024Mb    0000000000000000 1-Way
1    1024Mb    0000000040000000 1-Way

   2048 MB of System Memory
Testing the System

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR

Error detected by Pchip 1
APERROR = 00a0000020000002
      SERR
莫名其妙的

文库|博客

digital_boy

稍有积蓄

论坛徽章:: 0

2楼 [报告]

发表于 2006-05-17 14:20 |只看该作者

Want dev_t 0x0, /dev/console looked promising but failed (see above).
15 devices short, can't find all of the dump
Looking for a crash dump or saving one to /var/adm/crash failed.
Found an incomplete compressed partial dump.
Machine Check Header

Frame Size       = 0xf8

Error Flags       = 0x0

CPU Area Offset    = 0x18

System Area Offset  = 0xa0

Machine Check Code  = 0x202

Machine Check Rev.  = 0x1

Machine Check SYSTEM Fatal Abort

Machine Check error detected by system

Machine check (660/670) code = 0x202

Machine check code = 0x202

Ibox Status = 0000000000000000

Dcache Status = 0000000000000000

Cbox Address = 0000000000000000

Fill Syndrome 1 = 0000000000000000

Fill Syndrome 0 = 0000000000000000

Cbox Status = 0000000000000000

EV6 captured status of Bcache mode = 0000000000000000

EV6 Exception Address = ffffffff000bcde0

EV6 Interrupt Enablement and Current Processor mode = 0000007ee0000000

EV6 Interrupt Summary Register = 0000000200000000

EV6 TBmiss or Fault status = 0000000000000000

EV6 PAL Base Address = 0000000000018000

EV6 Ibox control = fffffe0021300396

EV6 Ibox Process_context = 0000000000000000

O/S Summary flag = 0000000000000002

Cchip Device Raw Interrupt Request = 2000000000000000

PCI Device Interrupt Mask = 0000000000000000

Cchip Miscellaneous Register = 00000012000000e0

Misc Register Decode:

Bit 5: Interval Timer Intr Pending to CPU 1

Bit 6: Interval Timer Intr Pending to CPU 2

Bit 7: Interval Timer Intr Pending to CPU 3

Bit 33: CChip Rev (Bit<33>)

Bit 36: CChip Rev (Bit<36>)

Cchip Revision: 12

ID of CPU performing read: 00

Pchip 0 CSR Address (phys) = 00000f0180000000

Pchip 0 System Error Register = 0000000000000000

Pchip System Error Register Decode:

Address of Erroneous Quadword = 0000000000000000

Command: DMA Read

Source Bus: GPCI

Pchip 0 Gport PCI Error Register = 0000000000000000

Pchip Error Register Decode:

PCI Xaction Start Address = 0000000000000000

PCI Command: Interrupt Acknowledge

Pchip 0 AGP Error Register = 0000000000000000

Pchip AGP Error Register Decode:

PCI Command: AGP Read (low-priority)

Pchip 0 Aport PCI Error Register = 0000000000000000

Pchip Error Register Decode:

PCI Xaction Start Address = 0000000000000000

PCI Command: Interrupt Acknowledge

Pchip 1 CSR Address (phys) = 00000f0380000000

Pchip 1 System Error Register = 0000000000000000

Pchip System Error Register Decode:

Address of Erroneous Quadword = 0000000000000000

Command: DMA Read

Source Bus: GPCI

Pchip 1 Gport PCI Error Register = 00300000003b4000

Pchip Error Register Decode:

Bit 14: Longword PCI address, bit 0

Bit 16: Longword PCI address, bit 2

Bit 17: Longword PCI address, bit 3

Bit 19: Longword PCI address, bit 5

Bit 20: Longword PCI address, bit 6

Bit 21: Longword PCI address, bit 7

Bit 31: Longword PCI address, bit 17

PCI Xaction Start Address = 00000000000003b4

PCI Command: IO Write

Pchip 1 AGP Error Register = 0000000000000000