论坛徽章:: 0

电梯直达

1楼 [收藏(0)] [报告]

发表于 2006-12-13 16:49 |只看该作者 |倒序浏览

11.  Select the correct telnet command that can be used to obtain support information related to the SNC’s last boot.

  A switchShow and supportShow
  B supportDump and loggerDump 100
  C loggerdump and supportdump
  D scsiShow and fcShow

12.  Considering the theoretical maximum bandwidth on a LVD SCSI-3 bus, how many IBM LTO tape drives does the SAN Partner Training emphasize as being the maximum number of tape drives that should be attached to each Scalar100 SNA SCSI Port?

  A One (1) Tape drive per SCSI Bus
  B Two (2) Tape drives per SCSI Bus
  C Four (4) Tape drives per SCSI Bus
  D Eight (

Tape Drives per SCSI Bus
  E Up to the maximum allowed from the15 available SCSI ID’s per SCSI Bus

13.  In preparation for an Installation, where would an Quantum SAN Partner obtain Statement of Work, Visio Drawings and other helpful tools required for a successful integration?


14.  When would an Quantum SAN Partner require a Visio drawing?


15.  What information needs to be recorded at the customer site to correctly catalog an Quantum Professional Services Integration?


16.  Should an Quantum SAN Partner complete a trip report and submit it to the Quantum Professional Services Coordinator? What information should be included in the report?


17.  Define “persistent bindings” in terms of Fibre Channel HBA applications.


18.  List three UNIX Fibre Host Bus Adapters (HBA’s) and their corresponding configuration files.


19.  List at least five (5) possible “configuration” issues within the scope of a complete SAN environment that could cause problems for Fibre connected Targets to be recognized by a Host at the OS level?


20.  What is the Quantum recommended best practice for cabling and configuring targets ID’s for drives and libraries attached to a SNC? Why would Quantum recommend this protocol?