免费注册 查看新帖 |

Chinaunix

  平台 论坛 博客 文库
最近访问板块 发新帖
查看: 2155 | 回复: 3
打印 上一主题 下一主题

[Mail] mailman出错分析!!!!欢迎指导! [复制链接]

论坛徽章:
0
跳转到指定楼层
1 [收藏(0)] [报告]
发表于 2007-05-16 10:56 |只看该作者 |倒序浏览
大家好, 我的mail server是Centos+postfix+dovecot+openwebmail+MailScanner. 目前收发正常, 现在我需要在此基础上增加邮件列表Mailling list功能, 我选择了著名的mailman,  在官方下载的2.1.9的stable版本的, 但按照README和INSTALL安装后, 我按照提示的web管理地址http://mail.xxxx.com/mailman/admin进入后, 却发现报错如下, 请大家帮忙分析一下,  我哪里做的不对,  我看了下提示是说我的web server执行CGI script和Mailman执行的group 不统一. Mailman执行CGI Script的group为nobody, 而web server 执行CGI Script 的group为apache. 但问题是我不知道如何修改这两者的执行CGI Script的group????!!!! 还请各位详细指导一下,  我为这个头疼好多天了.  谢谢各位!

Mailman CGI error!!!
The Mailman CGI wrapper encountered a fatal error. This entry is being stored in your syslog:

Group mismatch error.  Mailman expected the CGI
wrapper script to be executed as group "nobody", but
the system's web server executed the CGI script as
group "apache".  Try tweaking the web server to run the
script as group "nobody", or re-run configure,
providing the command line option `--with-cgi-gid=apache'.


再次感谢!!!

论坛徽章:
0
2 [报告]
发表于 2007-05-17 13:24 |只看该作者
帮帮忙阿,各位, 我真的因为这个问题困扰礼好长时间。 谢谢了!!!!!!!!!!

论坛徽章:
0
3 [报告]
发表于 2007-05-17 17:45 |只看该作者
modify httpd.conf and change repective entries (for example: Group nobody)

论坛徽章:
0
4 [报告]
发表于 2007-05-18 14:30 |只看该作者
谢谢楼上大哥,  但你能不能说详细点,通俗点?我是菜鸟,谢谢你!
您需要登录后才可以回帖 登录 | 注册

本版积分规则 发表回复

  

北京盛拓优讯信息技术有限公司. 版权所有 京ICP备16024965号-6 北京市公安局海淀分局网监中心备案编号:11010802020122 niuxiaotong@pcpop.com 17352615567
未成年举报专区
中国互联网协会会员  联系我们:huangweiwei@itpub.net
感谢所有关心和支持过ChinaUnix的朋友们 转载本站内容请注明原作者名及出处

清除 Cookies - ChinaUnix - Archiver - WAP - TOP