大家帮我看看我的PPPoE的配置，谢谢了！

pernlee

不知道什么原因老是拨不通。
上海电信 2M ADSL

ppp.conf

default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)

set timeout 180                        # 3 minute idle timer (the default)
enable dns                                # request DNS info (for resolv.conf)

adsl:
set device PPPoE:re0
set authname *******
set authkey *******
set dial
set login

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR


rc.conf （注：ADSL 的IP：192.168.1.1，我在Windows下就是这么设的）

usbd_enable="YES"

ifconfig_re0="inet 192.168.1.21  netmask 255.255.255.0"
hostname="FreeBSD.48t.org"


ppp.log

Jan 10 01:19:26  newsyslog[538]: logfile first created
Jan 11 12:22:06 FreeBSD ppp[715]: Phase: Using interface: tun0
Jan 11 12:22:06 FreeBSD ppp[715]: Phase: deflink: Created in closed state
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: set timeout 180
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: default: enable dns
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set device PPPoE:re0
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set authname ********
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set authkey ********
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set dial
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set login
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Jan 11 12:22:06 FreeBSD ppp[715]: tun0: Command: adsl: add default HISADDR
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: PPP Started (ddial mode).
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: bundle: Establish
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: closed -> opening
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:22:06 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:22:06 2008
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:22:11 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Chat: deflink: Redial timer expired.
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:22:42 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:22:42 2008
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:22:47 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Chat: deflink: Redial timer expired.
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: Connected!
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: opening -> dial
Jan 11 12:23:17 FreeBSD ppp[728]: tun0: Phase: deflink: dial -> carrier
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Disconnected!
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: carrier -> hangup
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Connect time: 5 secs: 0 octets in, 0 octets out
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: 0 packets in, 0 packets out
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase:  total 0 bytes/sec, peak 0 bytes/sec on Fri Jan 11 12:23:17 2008
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: hangup -> opening
Jan 11 12:23:22 FreeBSD ppp[728]: tun0: Phase: deflink: Enter pause (30) for redialing.


[ 本帖最后由 pernlee 于 2008-1-11 12:41 编辑 ]

我learnc

去掉这一行试试

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0

我的adsl必须去掉这一行才能拨通。

pernlee

本浏览了40次，为什么只有一个人回复？

000222

default:
# set speed sync #此行可略去，速度设置用
# set log phase tun #此行可略去，日志用
enable dns
enable lqr
adsl:               
set device PPPoE:fxp0  #修改fxp0 为您连ADSL设备的网卡名
#set mru 1492
#set mtu 1492
set speed sync
set ctsrts off
set timeout 0
set redial 0 0
set reconnect 3 5
set authname 用户名
set authkey 密码
set dial
set login
add default HISADDR

pernlee

谢谢，两位了，我回家去试一试

zero-B

default:
set device PPPoE:rl0，替换成你的网卡的设备名，比如我的是re0.
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
enable lqr
set log phase tun
add! default HISADDR // 这个！号是一定要要的。
# enable dns // DNS在/etc/resolv.conf里指定
  
pppoe:
set authname USERNAME
set authkey PASSWORD

[ 本帖最后由 zero-B 于 2008-1-11 17:26 编辑 ]

pernlee

谢谢各位了！

我learnc

原帖由 我learnc 于 2008-1-11 13:27 发表
去掉这一行试试

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0

我的adsl必须去掉这一行才能拨通。

photo attached

pernlee

老大们，你们的配置我都试过了，不行啊！

pernlee

终于搞定了，我把网卡和ADSL都接到HUB上就好了，也不知道为什么！