- 论坛徽章:
- 0
|
一,什么是LanConsole
在HP的小型机里面有一张独立于主机和系统之外的集成卡,这张卡里面有小型的集成系统(是独立于系统的一个操作环境),这个系统可以监控和管理主机和系统的运行状况.这张卡叫做GSP卡或者MP卡(老型号的机器叫做GSP(Guardian Service Processor (GSP)) 卡,新机器叫做MP卡).访问这张卡的系统有两种方式:
(1)通过串口的方式访问.(这个需要在机房操作)
(2)通过网络的的方式访问,也就是lanconsole的登陆方式.(在GSP卡和MP卡上都有串口和网络接口)
二,GSP卡常用命令
登陆到GSP卡后就可以直接进行相关的操作了
At the GSP prompt (GSP>) type he, to display the help menu, as shown:
(This is the old format help screen GSP A.01.06 and before)
Where: X is the current hardware revision, and A.XX.XX is the current firmware revision.
GSP> he
HE
Hardware Revision X Firmware Revision A.XX.XX July 16 1999, 17:19:31
AC : Alert Display Configuration
AR : Configure the Automatic System Restart
CA : Configure local and remote console parameters
CE : Log a chassis code in the GSP chassis code history buffer
CL : Display the history of the Console
CO : Return to Console Mode
CSP : Connect to another Service Processor via LAN
CT : Configure Tracing into GSP Firmware
DC : Default configuration
DI : Disconnect remote or LAN console
DR : OBSOLETE. Use the ER and EL commands
EL : Configure LAN console access options
ER : Configure remote/modem port access options
HE : Display the list of available commands
IT : Modify GSP inactivity timeouts
LC : Configure the LAN connection
LR : OBSOLETE. Use the ER command.
LS : Display LAN configuration
MFG : Enter the manufacturing mode
MR : Modem Reset
MS : Display the status of the Modem
OT : Disable overtemperature control
PC : Remote Power Control
PG : Configure Paging
PS : Display the status of the Power Management Module
QMM : Quit the manufacturing mode
RP : OBSOLETE. Use the DC command.
RS : System reset through RST signal
SDM : Set Display Mode (hex or text)
SE : Activate a system session on local or remote port
SL : Display SPU status logs
SO : Configure security options and access control
SS : Display the status of the system processors
TC : System reset through INIT signal
TE : Sends a message to other terminals
UR : OBSOLETE. Use the ER command.
VFP : Activates Alert Log Display (all ports except internal port)
VT : View Trace buffer
WHO : Display a list of GSP connected users
XD : GSP Diagnostics and Reset
XU : Upgrade the GSP Firmware
ZCTGNAYOR : Clear GSP NVM at your own risk
ZDTPMT : Dump the GSP Internal Post Mortem Trace
三,MP卡的常用操作
进入MP卡后并没有直接进入常用的命令操作界面,
先要用命令cm进入
MP>cm
进入后界面如下
MP:CM>
如果需要重启机器就可以用pe来重启了
MP:CM> pe
This command controls power enable to a hardware device.
T - Cabinet
C - Cell
P - IO Chassis
Select Device: t
The power state is ON for Cabinet 0.
In what state do you want the power? (ON/OFF) off(选择off是给主机断电,当提示断电完毕后在重新输入pe命令,选择on主机就加电启动) |
|
免费注册
发表于 2006-07-20 10:33
