- 论坛徽章:
- 0
|
问题描述
安装了Redhat Linux 7.3操作系统的DL360 G2服务器,在试图mount光驱时出现如下报错:
ServerWorks OSB4 in impossible state. Disable UDMA or if you are using Seagate then try switching disk types on this controller.
然后系统被锁死,只能通过电源开关手工重启服务器。
问题分析
DL360 G2服务器上的IDE光驱不能使用DMA传输方式,需要用PIO方式来工作。
解决办法
要禁用IDE控制器,需要手工修改内核参数,在/etc/grub.conf或者/etc/lilo.conf文件中添加“ide=nodma”参数,下面Red Hat Linux 7.2中grub.conf文件被修改的部分的例子:
title Red Hat Linux (2.4.7-10smp)
root (hd0,0)
kernel /vmlinuz-2.4.7-10smp ide=nodma ro root=/dev/cciss/c0d0p2
initrd /initrd-2.4.7-10smp.img
Below is a modified section of the lilo.conf file for Red Hat Linux 7.2 (run LILO after modifying this file):
image=/boot/vmlinuz-2.4.2-2smp
label=linux
initrd=/boot/initrd-2.4.2-2smp.img
read-only
root=/dev/cciss/c0d0p5
append="ide=nodma"
要了解关于修改grub.conf和lilo.conf文件的更多信息,请参考操作系统手 |
|