QTE－4.5.2移植！

crazytyt

此版本经测试会在7寸屏上出现segment fault错误，可以用 openmoko的arm-linux-gcc-4.1.2编译QT解决。4.1.2下载地址：http://qtextended.org/modules/mydownloads/visit.php?lid=38
QT下载地址：http://get.qt.nokia.com/qt/source/qt-embedded-linux-opensource-src-4.5.2.tar.gz
以下是网友写的移植过程：
移植QtEmbedded-4.5.2到mini2440开发板
1，下载解压源码：
root@yuanxh-desktop:/# wget http://www.arm123.com.cn/linux/arm-linux-gcc-4.3.2.tgz
root@yuanxh-desktop:/# tar xzvf arm-linux-gcc-4.3.2.tgz
root@yuanxh-desktop:/# mkdir /home/yuanxh/mini2440/
root@yuanxh-desktop:/# cd /home/yuanxh/mini2440/
root@yuanxh-desktop:/home/yuanxh/mini2440# wget ftp://ftp.qtsoftware.com/qt/source/qt-x11-opensource-src-4.5.2.tar.bz2
root@yuanxh-desktop:/home/yuanxh/mini2440# wget ftp://ftp.qtsoftware.com/qt/source/qt-embedded-linux-opensource-src-4.5.2.tar.bz2
root@yuanxh-desktop:/home/yuanxh/mini2440# tar xjvf qt-x11-opensource-src-4.5.2.tar.bz2
root@yuanxh-desktop:/home/yuanxh/mini2440# tar xjvf qt-embedded-linux-opensource-src-4.5.2.tar.bz2

2，配置编译Qt源码：
root@yuanxh-desktop:/home/yuanxh/mini2440# cd qt-x11-opensource-src-4.5.2
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2# ./configure
选择o确定开源版本，选择yes接受版权；
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2# make
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2# make install
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2# cd ..
root@yuanxh-desktop:/home/yuanxh/mini2440# cd qt-x11-opensource-src-4.5.2/tools/qvfb
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2/tools/qvfb# make
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2/tools/qvfb# make install
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-x11-opensource-src-4.5.2/tools/qvfb# cd ../../../
root@yuanxh-desktop:/home/yuanxh/mini2440# file qt-x11-opensource-src-4.5.2/bin/qvfb
3，配置编译QtE源码X86版本：
root@yuanxh-desktop:/home/yuanxh/mini2440# mv qt-embedded-linux-opensource-src-4.5.2 qt-embedded-linux-opensource-src-4.5.2-x86
root@yuanxh-desktop:/home/yuanxh/mini2440# cd qt-embedded-linux-opensource-src-4.5.2-x86
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-x86# ./configure -prefix /usr/local/Trolltech/QtEmbedded-4.5.2-x86 -embedded x86 -qvfb
选择o确定开源版本，选择yes接受版权；
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-x86# make
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-x86# make install
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-x86# cd ..
root@yuanxh-desktop:/home/yuanxh/mini2440# file /usr/local/Trolltech/QtEmbedded-4.5.2-x86/examples/widgets/analogclock/analogclock
root@yuanxh-desktop:/home/yuanxh/mini2440# cp qt-x11-opensource-src-4.5.2/bin/qvfb /usr/local/Trolltech/QtEmbedded-4.5.2-x86/bin
4，在QVFB上运行DEMO代码
建立配置脚本
root@yuanxh-desktop:/home/yuanxh/mini2440# cd /usr/local/Trolltech/QtEmbedded-4.5.2-x86
root@yuanxh-desktop:/usr/local/Trolltech/QtEmbedded-4.5.2-x86# vi setenv-x86.sh
　　添加如下内容:
　　QTEDIR=/usr/local/Trolltech/QtEmbedded-4.5.2-x86
　　PATH=/usr/local/Trolltech/QtEmbedded-4.5.2-x86/bin:$PATH
　　LD_LIBRARY_PATH=/usr/local/Trolltech/QtEmbedded-4.5.2-x86/lib:$LD_LIBRARY_PATH
　　保存退出.
root@yuanxh-desktop:/usr/local/Trolltech/QtEmbedded-4.5.2-x86# source setenv-x86.sh
　　root@yuanxh-desktop:/usr/local/Trolltech/QtEmbedded-4.5.2-x86# cd /examples/widgets/analogclock
　　root@yuanxh-desktop:/usr/local/Trolltech/QtEmbedded-4.5.2-x86/examples/widgets/analogclock# qvfb -width 640 -height 480 &
　　root@yuanxh-desktop:/usr/local/Trolltech/QtEmbedded-4.5.2-x86/examples/widgets/analogclock# ./analogclock -qws
5，配置编译QtE源码ARM版本：
root@yuanxh-desktop:/home/yuanxh/mini2440# tar xvjf  qt-embedded-linux-opensource-src-4.5.2.tar.bz2
root@yuanxh-desktop:/home/yuanxh/mini2440# mv qt-embedded-linux-opensource-src-4.5.2 qt-embedded-linux-opensource-src-4.5.2-arm
root@yuanxh-desktop:/home/yuanxh/mini2440# cd qt-embedded-linux-opensource-src-4.5.2-arm/
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# cd mkspecs/qws/linux-arm-g++/
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm/mkspecs/qws/linux-arm-g++# cp qmake.conf qmake.conf.org
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm/mkspecs/qws/linux-arm-g++# vi qmake.conf
把所有的 arm-linux- 修改为：/usr/local/arm/4.3.2/bin/arm-linux- 后保存
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm/mkspecs/qws/linux-arm-g++# cd ../../../
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# ./configure -prefix /usr/local/QtEmbedded-4.5.2 -embedded arm -no-webkit
选择o确定开源版本，选择yes接受版权；
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# make
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# make install
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# cd ..
root@yuanxh-desktop:/home/yuanxh/mini2440# file /usr/local/QtEmbedded-4.5.2/examples/widgets/analogclock/analogclock
root@yuanxh-desktop:/home/yuanxh/mini2440# cd /usr/local/
root@yuanxh-desktop:/usr/local# tar czvf QtEmbedded-4.5.2.tgz QtEmbedded-4.5.2
root@yuanxh-desktop:/usr/local# sz QtEmbedded-4.5.2.tgz
6，在ARM板上运行DEMO
建立配置脚本
[root@FriendlyARM /]# mkdir /usr/local/QtEmbedded-4.5.2/
[root@FriendlyARM /]# cd /usr/local/QtEmbedded-4.5.2/
[root@FriendlyARM QtEmbedded-4.5.2]# vi setenv-arm.sh
　　添加如下内容:
　　export QTDIR=/usr/local/QtEmbedded-4.5.2
　　export QPEDIR=/usr/local/QtEmbedded-4.5.2
　　export LD_LIBRARY_PATH=$QTDIR/lib:/usr/local/lib:$LD_LIBRARY_PATH
/usr/local/QtEmbedded-4.5.2/analogclock -qws &
　　保存退出，并执行。
[root@FriendlyARM QtEmbedded-4.5.2]# mkdir lib/
[root@FriendlyARM QtEmbedded-4.5.2]# mkdir lib/fonts/
把以下的库文件从编译生成的QtEmbedded-4.5.2.tgz文件包的/lib复制到目标板的/usr/local/QtEmbedded-4.5.2/lib
libQtCore.so.4
libQtGui.so.4
libQtNetwork.so.4
libQtSql.so.4
把例子程序analogclock从编译生成的QtEmbedded-4.5.2.tgz文件包的/examples/widgets/analogclock复制到目标板的/usr/local/QtEmbedded-4.5.2/
常用字库文件从从编译生成的QtEmbedded-4.5.2.tgz文件包的lib/fonts/复制到目标板的/usr/local/QtEmbedded-4.5.2/lib/fonts/
......
运行例子
[root@FriendlyARM QtEmbedded-4.5.2]# ./analogclock -qws
[root@FriendlyARM /]# vi /etc/init.d/rcS
在文件中加入：
  /usr/local/QtEmbedded-4.5.2/setenv-arm.sh        
  #/bin/qtopia &
添加自动启动。                        
7，裁剪编译QtE源码ARM版本：
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# ./configure -prefix /usr/local/QtEmbedded-4.5.2 -embedded arm \
-release -shared -fast -no-largefile -qt-sql-sqlite -no-qt3support -no-xmlpatterns -no-mmx -no-3dnow -no-sse -no-sse2 -no-svg -no-webkit -qt-zlib -qt-gif \
-qt-libtiff -qt-libpng -qt-libmng -qt-libjpeg -make libs -nomake tools -nomake examples -nomake docs -nomake demo -no-nis -no-cups -no-iconv -no-dbus \
-no-openssl -xplatform qws/linux-arm-g++ -little-endian -qt-freetype -depths 16,18 -qt-gfx-linuxfb -no-gfx-transformed -no-gfx-multiscreen \
-no-gfx-vnc -no-gfx-qvfb -qt-kbd-usb -no-glib -qt-mouse-tslib
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# make
root@yuanxh-desktop:/home/yuanxh/mini2440/qt-embedded-linux-opensource-src-4.5.2-arm# make install



本文来自ChinaUnix博客，如果查看原文请点：http://blog.chinaunix.net/u3/101219/showart_2061196.html