audacious安装configure要升级glib2,怎么办？？？？？

zengmao

在安装audacious时，configure错误:
configure: error:
Glib2 version 2.12.3 was found, but glib-2.0 >= 2.14.0 is required.

[m@localhost audacious-1.5.1]$ rpm -qa |egrep glib2
glib2-2.12.3-2.fc6
glib2-devel-2.12.3-2.fc6


我用：rpm -U glib2-2.18.2-3.fc10.i386.rpm和      rpm -Uglib2-devel-2.18.2-3.fc10.i386.rpm
去更新，但是把系统搞坏了，不能进了，又重装系统。


是rpm -U错误不该用这个命令，还是要用fc6不能用fc10,还是其它原因？？？？？？？？？


我的系统是redhat的

请问怎样去升级这个包呢呢？？？？？？？



各位大哥来帮帮我！！！！！

T-bagwell

源码编译一个放在其他目录呢？，然后需要的时候指过去

zengmao

./conifigure没有这个选项吧？？？？？？？


直接把系统的glib2升级怎么办？？？？？

T-bagwell

yum update glib

不要随便升级，否则依赖glib的可能会有些变动了

T-bagwell

configure肯定有对应的选项的，要不不可能出现依赖的这么一说
你./configure --help看看

zengmao

[m@localhost audacious-1.5.1]$ yum update glib
Loading "installonlyn" plugin
Loading "security" plugin
Loading "rhnplugin" plugin
This system is not registered with RHN.
RHN support will be disabled.
You need to be root to perform this command.



没有RHN就不行吧，RHN不是要钱儿吗？？？？？

T-bagwell

原帖由 T-bagwell 于 2009-2-12 12:01 发表
configure肯定有对应的选项的，要不不可能出现依赖的这么一说
你./configure --help看看

chenyx

原帖由 zengmao 于 2009-2-12 12:07 发表
[m@localhost audacious-1.5.1]$ yum update glib
Loading "installonlyn" plugin
Loading "security" plugin
Loading "rhnplugin" plugin
This system is not registered with RHN.
RHN support will be  ...

需要root权限运行yum

zengmao

[m@localhost audacious-1.5.1]$ ./configure --help
`configure' configures audacious 1.5.1 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']

Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]

By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:
  --bindir=DIR           user executables [EPREFIX/bin]
  --sbindir=DIR          system admin executables [EPREFIX/sbin]
  --libexecdir=DIR       program executables [EPREFIX/libexec]
  --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
  --libdir=DIR           object code libraries [EPREFIX/lib]
  --includedir=DIR       C header files [PREFIX/include]
  --oldincludedir=DIR    C header files for non-gcc [/usr/include]
  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR          info documentation [DATAROOTDIR/info]
  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR           man documentation [DATAROOTDIR/man]
  --docdir=DIR           documentation root [DATAROOTDIR/doc/audacious]
  --htmldir=DIR          html documentation [DOCDIR]
  --dvidir=DIR           dvi documentation [DOCDIR]
  --pdfdir=DIR           pdf documentation [DOCDIR]
  --psdir=DIR            ps documentation [DOCDIR]

System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]

Optional Features:
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --disable-nls           do not use Native Language Support
  --disable-dependency-tracking  speeds up one-time build
  --enable-dependency-tracking   do not reject slow dependency extractors
  --enable-one-plugin-dir      Use a single plugin dir (def: no)
  --disable-user-plugin-dir    Disable per-user plugin dir (def: enabled)
  --disable-chardet             Disable charset detection support (def: enabled)
  --enable-dbus                Enable D-Bus support (def: enabled)
  --enable-samplerate          Enable libsamplerate support (def: disabled)
  --disable-xspf               Disable XSPF support (def: enabled)
  --disable-xmltest       Do not try to compile and run a test LIBXML program
  --disable-sse2               Disable SSE2 support (def: enabled)
  --disable-altivec            Disable AltiVec support (def: enabled)
  --disable-sm                 Disable session management (def: enabled)

Optional Packages:
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-gnu-ld           assume the C compiler uses GNU ld default=no
  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
  --with-included-gettext use the GNU gettext library included here
  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
  --without-libintl-prefix     don't search for libintl in includedir and libdir
  --with-xml-prefix=PFX   Prefix where libxml is installed (optional)
  --with-xml-exec-prefix=PFX Exec prefix where libxml is installed (optional)
  --with-regexlib[=gnu/oniguruma/pcre]   use the chosen regex library (def: gnu)

Some influential environment variables:
  PKG_CONFIG  path to pkg-config utility
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  CXX         C++ compiler command
  CXXFLAGS    C++ compiler flags
  CCAS        assembler compiler command (defaults to CC)
  CCASFLAGS   assembler compiler flags (defaults to CFLAGS)
  GLIB_CFLAGS C compiler flags for GLIB, overriding pkg-config
  GLIB_LIBS   linker flags for GLIB, overriding pkg-config
  GTHREAD_CFLAGS
              C compiler flags for GTHREAD, overriding pkg-config
  GTHREAD_LIBS
              linker flags for GTHREAD, overriding pkg-config
  GTK_CFLAGS  C compiler flags for GTK, overriding pkg-config
  GTK_LIBS    linker flags for GTK, overriding pkg-config
  PANGO_CFLAGS
              C compiler flags for PANGO, overriding pkg-config
  PANGO_LIBS  linker flags for PANGO, overriding pkg-config
  CAIRO_CFLAGS
              C compiler flags for CAIRO, overriding pkg-config
  CAIRO_LIBS  linker flags for CAIRO, overriding pkg-config
  MOWGLI_CFLAGS
              C compiler flags for MOWGLI, overriding pkg-config
  MOWGLI_LIBS linker flags for MOWGLI, overriding pkg-config
  LIBMCS_CFLAGS
              C compiler flags for LIBMCS, overriding pkg-config
  LIBMCS_LIBS linker flags for LIBMCS, overriding pkg-config
  DBUS_CFLAGS C compiler flags for DBUS, overriding pkg-config
  DBUS_LIBS   linker flags for DBUS, overriding pkg-config
  SAMPLERATE_CFLAGS
              C compiler flags for SAMPLERATE, overriding pkg-config
  SAMPLERATE_LIBS
              linker flags for SAMPLERATE, overriding pkg-config
  LIBPCRE_CFLAGS
              C compiler flags for LIBPCRE, overriding pkg-config
  LIBPCRE_LIBS
              linker flags for LIBPCRE, overriding pkg-config
  SM_CFLAGS   C compiler flags for SM, overriding pkg-config
  SM_LIBS     linker flags for SM, overriding pkg-config

Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.

Report bugs to <bugs+audacious@atheme.org>.
[m@localhost audacious-1.5.1]$



哪个参数是呀？？？？？

冷风

是什么版本的linux？如果是fedora用yum找个源装拉