安装atk-1.24.0的错误提示

zhou2324

checking for pkg-config... /usr/local/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for GLIB - version >= 2.5.7...
*** 'pkg-config --modversion glib-2.0' returned 2.18.0, but GLIB (2.12.3)
*** was found! If pkg-config was correct, then it is best
*** to remove the old version of GLib. You may also be able to fix the error
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH
*** to point to the correct configuration files
no
checking for pkg-config... (cached) /usr/local/bin/pkg-config
checking pkg-config is at least version 0.16... yes
checking for GLIB - version >= 2.0.0...
*** 'pkg-config --modversion glib-2.0' returned 2.18.0, but GLIB (2.12.3)
*** was found! If pkg-config was correct, then it is best
*** to remove the old version of GLib. You may also be able to fix the error
*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing
*** /etc/ld.so.conf. Make sure you have run ldconfig if that is
*** required on your system.
*** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH
*** to point to the correct configuration files
no
configure: error:
*** GLIB 2.0.0 or better is required. The latest version of
*** GLIB is always available from ftp://ftp.gtk.org/. If GLIB is installed
*** but not in the same location as pkg-config add the location of the file
*** glib-2.0.pc to the environment variable PKG_CONFIG_PATH.


上面是我在安装atk-1.24.0的错误提示，彻底被打败，
麻烦各位大侠帮忙看看，感激不尽！

kns1024wh

kg-config --modversion glib-2.0' returned 2.18.0, but GLIB (2.12.3)
版本问题