CentOS中国镜像mirror,be10.com无法访问

arbor

想升级一下我的CentOS，提示：

[root@mail init.d]# yum update
Setting up Update Process
Setting up repositories
Cannot open/read repomd.xml file for repository: update
failure: repodata/repomd.xml from update: [Errno 256] No more mirrors to try.
Error: failure: repodata/repomd.xml from update: [Errno 256] No more mirrors to try.

[root@mail yum.repos.d]# cat CentOS-Base.repo正常，浏览mirror.be10.com发现无法访问，www.be10.com正常。
能ping通，发现80端口也开放，但是就是无法访问和升级。

[root@mail yum.repos.d]# ping www.be10.com
PING www.be10.com (61.172.245.80) 56(84) bytes of data.
64 bytes from 61.172.245.80: icmp_seq=0 ttl=52 time=5.42 ms
64 bytes from 61.172.245.80: icmp_seq=1 ttl=52 time=5.95 ms
64 bytes from 61.172.245.80: icmp_seq=2 ttl=52 time=5.47 ms

--- www.be10.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 3292ms
rtt min/avg/max/mdev = 5.428/5.616/5.950/0.251 ms, pipe 2
[root@mail yum.repos.d]# ping mirror.be10.com
PING mirror.be10.com (61.131.14.15) 56(84) bytes of data.
64 bytes from 61.131.14.15: icmp_seq=0 ttl=54 time=26.0 ms
64 bytes from 61.131.14.15: icmp_seq=1 ttl=54 time=26.8 ms
64 bytes from 61.131.14.15: icmp_seq=2 ttl=54 time=25.9 ms
64 bytes from 61.131.14.15: icmp_seq=3 ttl=54 time=24.4 ms
64 bytes from 61.131.14.15: icmp_seq=4 ttl=54 time=25.2 ms
64 bytes from 61.131.14.15: icmp_seq=5 ttl=54 time=25.8 ms

--- mirror.be10.com ping statistics ---
6 packets transmitted, 6 received, 0% packet loss, time 13254ms
rtt min/avg/max/mdev = 24.438/25.728/26.820/0.746 ms, pipe 2
[root@mail yum.repos.d]# nmap mirror.be10.com

Starting nmap 3.70 ( http://www.insecure.org/nmap/ ) at 2006-03-15 09:49 CST
Interesting ports on 61.131.14.15:
(The 1644 ports scanned but not shown below are in state: closed)
PORT     STATE    SERVICE
22/tcp   open     ssh
80/tcp   filtered http
81/tcp   open     hosts2-ns
82/tcp   open     xfer
111/tcp  open     rpcbind
135/tcp  filtered msrpc
138/tcp  filtered netbios-dgm
139/tcp  filtered netbios-ssn
199/tcp  open     smux
445/tcp  filtered microsoft-ds
593/tcp  filtered http-rpc-epmap
707/tcp  filtered unknown
873/tcp  open     rsync
888/tcp  open     accessbuilder
1434/tcp filtered ms-sql-m
4444/tcp filtered krb524

Nmap run completed -- 1 IP address (1 host up) scanned in 3.341 seconds
[root@mail yum.repos.d]#

arbor

现在可以访问了，不过好象速度比较慢，而且我的还是无法更新，错误提示还是一样。

是不是因为那边有些问题，速度慢才无法更新的？

summon

早就有问题了，我现在改用主站的镜像。

arbor

原帖由 summon 于 2006-3-20 10:40 发表
早就有问题了，我现在改用主站的镜像。

哪里是不是很慢？官方主站？

有没有快一些的镜像推荐一个？

ardar

还是用官方镜像的好 be10估计撑不住了 全国都在用它的镜像