- 论坛徽章:
- 0
|
今天在更换superdome MP卡时,需要将MP卡的现有微码16.6更新到26.3,升级从0%到100%不到1分钟,最后报UPdata failed。提示是否断续升级,我选择了“N”之后,用PE关机后,再加电,MP启动到以下地方就不动了
VxWorks System Boot
Copyright 1984-2002 Wind River Systems, Inc.
CPU: PC PENTIUM
Version: VxWorks5.5.1
BSP version: 1.2/3
Creation date: Aug 12 2008, 14:01:49
Press any key to stop auto-boot...
0
auto-booting...
boot device : ata=0,0
unit number : 0
processor number : 0
file name : /ata0/subflash
flags (f) : 0x0
Attaching to ATA disk device... done.
Loading /ata0/subflash...6265824
Starting at 0x308000...
然后重启MP,进入VxWorks的信息如下:
[VxWorks Boot]: l
boot device : ata=0,0
unit number : 0
processor number : 0
file name : /ata0/subflash
flags (f) : 0x0
Attaching to ATA disk device... done.
Loading /ata0/subflash...6265824
entry = 0x308000
[VxWorks Boot]: l
boot device : ata=0,0
unit number : 0
processor number : 0
file name : /ata0/subflash
flags (f) : 0x0
Attaching to ATA disk device... Error creating dosFs device /ata0/, errno=d0006
usrAtaConfig failed.
Error loading file: errno = 0xd0006.
[VxWorks Boot]:
请问下:出现这种情况,除了更换MP卡,还有没有其它方法恢复,谢谢大家!!! |
|