重启之后在ok提示符下停下，上报“Can't load specfs”，怎么办

gzx99gzx

{0} ok boot -av


SPARC Enterprise T5220, No Keyboard
Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.7, 32640 MB memory available, Serial #77630404.
Ethernet address 0:14:4f:a0:8b:c4, Host ID: 84a08bc4.



Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@0  File and args: -av
module /platform/SUNW,SPARC-Enterprise-T5220/kernel/sparcv9/unix: text at [0x100
0000, 0x10b5275] data at 0x1800000
module /platform/SUNW,SPARC-Enterprise-T5220/kernel/sparcv9/genunix: text at [0x
10b5278, 0x127df17] data at 0x189d5c0
module /platform/SUNW,SPARC-Enterprise-T5220/kernel/misc/sparcv9/platmod: text a
t [0x127df18, 0x127df2f] data at 0x18f2d98
module /platform/SUNW,SPARC-Enterprise-T5220/kernel/cpu/sparcv9/SUNW,UltraSPARC-
T2: text at [0x127df40, 0x128365f] data at 0x18f3500
Name of system file [/etc/system]:
SunOS Release 5.10 Version Generic_142900-14 64-bit
Copyright 1983-2010 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
(Can't load specfs) Program terminated
{0} ok

briangao

That means your boot block doesn't recognize the file system type on your / partition. Do you know what file system you use for /, /var, /usr such as ZFS, UFS, VXFS etc? Are you sure the boot disk is  /pci@0/pci@0/pci@2/scsi@0/disk@0?

财版

boot -F failsafe

mount /dev/dsk/c0t0d0s0 /a

bootadm update-archive -R /a

umount /a

reboot

东方蜘蛛

LS正解

gzx99gzx

回复 4# 财版

按照你的操作，涛声依旧，谢谢   

# reboot
Terminated
syncing file systems... done
rebooting...
Resetting...


SPARC Enterprise T5220, No Keyboard
Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.30.7, 32640 MB memory available, Serial #77630404.
Ethernet address 0:14:4f:a0:8b:c4, Host ID: 84a08bc4.



Boot device: disk  File and args:
SunOS Release 5.10 Version Generic_142900-14 64-bit
Copyright 1983-2010 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
(Can't load specfs) Program terminated
{0} ok

东方蜘蛛

LZ能告诉下大家，怎么出现的这个情况，出问题前做过什么操作？

gzx99gzx

回复 7# 东方蜘蛛


    没干什么，就是近期感觉那个服务器运行特别慢，就重启了一下，重启之后就这样了

财版

回复 6# gzx99gzx


    做个最大化自检，然后光盘boot 到单用户，检查硬盘是否有报错，messages里有啥错误。

财版

回复 6# gzx99gzx


    还有，光盘启动后，看看是不是用的镜像，但用镜像盘启动试一下。