- 论坛徽章:
- 2
|
Corrected ECC Error?－－－CUP/MEM?
诊断结果如下：
<*>;
Hardware Power On
@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 CPU2*
Validating JTAG integrity...Done
Disabling DAR error circuitry...Done
Clearing DCS error circuitry state...Done
Initializing DTL circuitry state...Done
Initializing CDX via JTAG...Done
Enabling DAR error circuitry...Done
Probing Centerplane....part# 501-5819-13 serial# 037741
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
'STICK' clock 10MHz; BootBus timing 014f.99fd.a7e6.3f29
Probing I/O Riser......part# 501-5820-04 serial# 031725
Probing System RSC.....part# 501-5856-06 serial# 173914
Probing PwrDistBoard...part# 375-3006-05 serial# M37688
Probing PowerSupply0...part# 300-1480-05 serial# N75232
Probing PowerSupply1...part# 300-1480-05 serial# N78096
Probing FCAL BPlane0...part# 501-5822-04 serial# 034187
Probing GPTwo Slot A...part# 501-6334-03 serial# 095386
Safari min 100MHz, cumulative 100MHz; max 150MHz, cumulative 150MHz
CPU rated speed 900MHz; ECache 8MB 3.3ns
Probing GPTwo Slot B...No module detected
Desired Safari Bus speed 150MHz, selecting 150MHz
Configuring CPUs..........
.... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400
.... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400 Done
Setting system speed (and resetting)...
<*>;
Set Speed Reset
@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Executing Power On SelfTest w/%o0 = 0000.0000.0001.2042
0>;@(#) Cherrystone POST 4.10.8 2003/07/24 18:07
/export/common-source/firmware_re/post/post-build-4.10.8/Camelot/cstone/integrated (firmware_re)
0>;Jump from OBP-> OST.
0>;CPUs present in system: 0 2
0>;Keyswitch in DIAGNOSTIC POSITION.
0>;Diag level set to MIN.
0>;MFG scrpt mode set NORM
0>;I/O port set to serial TTYA.
0>;
0>;Start selftest...
0>;Init CPU
0>; Cheetah_plus Version 2.3
0>;DMMU Registers Access
0>;DMMU TLB DATA RAM Access
0>;DMMU TLB TAGS Access
0>;IMMU Registers Access
0>;IMMU TLB DATA RAM Access
0>;IMMU TLB TAGS Access
0>robe Ecache
0>; Size = 00000000.00800000...
0>;Ecache Data Bitwalk
0>;Ecache Address Bitwalk
0>;Scrub and Setup Ecache
0>;Setup and Enable DMMU
0>;Setup DMMU Miss Handler
0>;Test and Init Temp Mailbox
2>;Init CPU
2>; Cheetah_plus Version 2.3
2>;DMMU Registers Access
2>;DMMU TLB DATA RAM Access
2>;DMMU TLB TAGS Access
2>;IMMU Registers Access
2>;IMMU TLB DATA RAM Access
2>;IMMU TLB TAGS Access
2>robe Ecache
2>; Size = 00000000.00800000...
2>;Ecache Data Bitwalk
2>;Ecache Address Bitwalk
2>;Scrub and Setup Ecache
2>;Setup and Enable DMMU
2>;Setup DMMU Miss Handler
2>;Test and Init Temp Mailbox
0>;Initializing Scan Database
0>;Mask DAR errors off
0>;Init CDX DTL
0>;Init DAR DTL
0>;Enable Partial DAR error
0>;Init DCS DTL
0>;Init I2C
0>;Unquiesce Safari
0>;Margin all voltages to nominal
0>;Scan ring integrity
0>;INFO: H/W under test = CPU Board Slot B (Cheetah 1, DCDS [0-7], SRAMs) Scan Ring NOT Present or Shut OFF
0>;INFO: H/W under test = CPU Board Slot B (Cheetah 3, SRAMs) Scan Ring NOT Present or Shut OFF
0>;Set Trip Temp CPU 0 to 110C
0>;Set Trip Temp CPU 2 to 110C
0>;WED JUNE 2 6:13:10 GMT 4
0>;Safari quick check
0>; to IO-bridge_0
0>; to IO-bridge_1
0>;Safari full check
0>; to IO-bridge_0
0>; to IO-bridge_1
0>;Disable Cheetah 0 error checking
0>;Disable Cheetah 2 error checking
0>robe and Setup Memory
0>;INFO: 512MB Bank 0
0>;INFO: 512MB Bank 1
0>;INFO: 512MB Bank 2
0>;INFO: 512MB Bank 3
0>;
0>;Data Bitwalk on Master
0>; Test Bank 0.
0>; Test Bank 1.
0>; Test Bank 2.
0>; Test Bank 3.
0>;Address Bitwalk on Master
0>;INFO: Addr walk mem test on CPU 0 Bank 0: 00000000.00000000 to 00000000.20000000.
0>;INFO: Addr walk mem test on CPU 0 Bank 1: 00000001.00000000 to 00000001.20000000.
0>;INFO: Addr walk mem test on CPU 0 Bank 2: 00000002.00000000 to 00000002.20000000.
0>;INFO: Addr walk mem test on CPU 0 Bank 3: 00000003.00000000 to 00000003.20000000.
0>;WARNING: TEST = Address Bitwalk on Master
0>;H/W under test = CPU, Memory, Motherboard/Centerplane
0>;MSG = Data or Instruction Access Error,
Trap Type 00000000.00000063
Trap PC ffffffff.f012ea58
Trap Level 00000000.00000001
AFSR 00000002.00000112
AFAR 00000003.0f7fc020
0>;END_WARNING
0>; CE bit: Correctable system data ECC error
0>;
Failed cache line data:
0>; Address 00000003.0f7fc000=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc008=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc010=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc018=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc020=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc028=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc030=5a5a5a5a.5a5a5a5a.
0>; Address 00000003.0f7fc038=5a5a5a5a.5a5a5a5a.
0>; AFSR check after re-reading data:
0>; No Errors in afsr reg
0>;ERROR: TEST = Address Bitwalk on Master
0>;H/W under test = CPU0 Bank 3 Dimm 2, J3201 side 2
0>;Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>;MSG = DIMM failure Bank 3 DIMM 2 Pin 87
0>;END_ERROR
0>;ERROR: TEST = Check Mem Banks
0>;H/W under test = CPU, Motherboard/Centerplane, I/O board, (system init)
0>;Repair Instructions: Replace items in order listed by 'H/W under test' above.
0>;MSG = Offline Bank 3.
0>;END_ERROR
0>;Set Mailbox
0>;Setup Final DMMU Entries
0>ost Image Region Scrub
0>;Run POST from Memory
0>;Verifying checksum on copied image.
0>;The Memory's CHECKSUM value is 9d6c.
0>;The Memory's Content Size value is 9067a.
0>;Success... Checksum on Memory Validated.
0>;Safari quick check
0>; to IO-bridge_0
0>; to IO-bridge_1
0>;Safari full check
0>; to IO-bridge_0
0>; to IO-bridge_1
2>;Safari quick check
2>; to IO-bridge_0
2>; to IO-bridge_1
2>;Safari full check
2>; to IO-bridge_0
2>; to IO-bridge_1
2>robe and Setup Memory
2>;INFO: 512MB Bank 0
2>;INFO: 512MB Bank 1
2>;INFO: 512MB Bank 2
2>;INFO: 512MB Bank 3
2>;
2>;Set Mailbox
0>;Data Bitwalk on Slave 2
0>; Test Bank 0.
0>; Test Bank 1.
0>; Test Bank 2.
0>; Test Bank 3.
0>;Address Bitwalk on Slave 2
0>;INFO: Addr walk mem test on CPU 2 Bank 0: 00000020.00000000 to 00000020.20000000.
0>;INFO: Addr walk mem test on CPU 2 Bank 1: 00000021.00000000 to 00000021.20000000.
0>;INFO: Addr walk mem test on CPU 2 Bank 2: 00000022.00000000 to 00000022.20000000.
0>;INFO: Addr walk mem test on CPU 2 Bank 3: 00000023.00000000 to 00000023.20000000.
2>;Setup Final DMMU Entries
2>;Map Slave POST to master memory
2>rint Mem Config
2>;Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
2>;Memory in non-interleave config:
2>; Bank 0 512MB : 00000020.00000000 ->; 00000020.20000000.
2>; Bank 1 512MB : 00000021.00000000 ->; 00000021.20000000.
2>; Bank 2 512MB : 00000022.00000000 ->; 00000022.20000000.
2>; Bank 3 512MB : 00000023.00000000 ->; 00000023.20000000.
0>rint Mem Config
0>;Caches : Icache is ON, Dcache is ON, Wcache is ON, Pcache is ON.
0>;Memory in non-interleave config:
0>; Bank 0 512MB : 00000000.00000000 ->; 00000000.20000000.
0>; Bank 1 512MB : 00000001.00000000 ->; 00000001.20000000.
0>; Bank 2 512MB : 00000002.00000000 ->; 00000002.20000000.
2>;Scrub Memory
0>;Scrub Memory
0>;Quick Block Mem Test
0>;Quick Test 16777216 bytes at 00000000.00600000
2>;Quick Block Mem Test
2>;Quick Test 16777216 bytes at 00000020.00000000
2>;44% Done...
2>;Flush Caches
0>;Flush Caches
0>;IO-Bridge unit 0 init test
0>;IO-Bridge unit 1 init test
0>;IO-Bridge unit 0 reg test
0>;IO-Bridge unit 0 mem test
0>;IO-Bridge unit 0 PCI DMA A test
0>;IO-Bridge unit 0 PCI DMA B test
0>;IO-Bridge unit 0 PCI merg test
0>;IO-Bridge unit 0 PCI iommu test
0>;IO-Bridge unit 0 PCI stc test
0>;IO-Bridge unit 0 interrupt test
0>;IO-Bridge unit 1 reg test
0>;IO-Bridge unit 1 mem test
0>;IO-Bridge unit 1 PCI DMA C test
0>;IO-Bridge unit 1 PCI DMA D test
0>;IO-Bridge unit 1 PCI merg test
0>;IO-Bridge unit 1 PCI iommu test
0>;IO-Bridge unit 1 PCI stc test
0>;IO-Bridge unit 1 interrupt test
2>;IO-Bridge unit 0 init test
2>;IO-Bridge unit 0 PCI merg test
2>;IO-Bridge unit 0 interrupt test
2>;IO-Bridge unit 1 init test
2>;IO-Bridge unit 1 PCI merg test
2>;IO-Bridge unit 1 interrupt test
2>;FPU Registers and Data Path
0>;FPU Registers and Data Path
2>;FPU Move Registers
0>;FPU Move Registers
2>;FSR Read/Write
0>;FSR Read/Write
2>;FPU Branch Instructions
0>;FPU Branch Instructions
2>;FPU Functional Test
0>;FPU Functional Test
2>;FPU BLOCK REG TEST
0>;FPU BLOCK REG TEST
0>;
0>;Motherboard/Centerplane Board Part Number:
0>; 5015819-13-51
0>;IO/Riser Board Part Number:
0>; 5015820-04-52
0>;CPUA Board Part Number:
0>; 5016334-03-57
0>;CPUB Board Part Number:
0>;INFO: Unpopulated Slot
0>;Turn IO-Bridge 0 errors on
0>;Turn IO-Bridge 1 errors on
0>;Turn Cheetah 0 errors on
0>;Turn Cheetah 2 errors on
0>;Turn Module A DCDS errors on
0>;Turn DCS errors on
0>;Turn DAR errors on
0>;Turn error traps on
0>;ERROR:
0>; POST toplevel status has the following failures:
0>; CPU0 Memory Bank 3
0>; POST failed the following devices on CPU 0:
0>; Mem Bank3 DIMM2
0>;END_ERROR
0>OST: Return to OBP.
CPU0: System Power On Selftest Completed
Pass/Fail Status = ffff.ffff.ffff.ffff
ESB Overall Status = ffff.fff7.ffff.ffff
<*>;
POST Reset
@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Configuring CPUs..........
.... CPU0 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400
.... CPU2 Rated Speed 900MHz, Safari 150MHz, want 6:1, got 6:1 ==>; CPU 900MHz
Ecache 8MB 3.3ns mode=4-3-3 2-way ECCR: 0000.0000.0329.4400 Done
<*>;
CPU Configuration Reset
@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Enabling Safari .......... CPU0 CPU2 Done
Probing Memory............
Probing CPU0 memory configuration
NGDIMM#0 part# 501-5401-03 serial# B0L0KQ, 128MB + 128MB, SC#0
NGDIMM#1 part# 501-5401-03 serial# B0L0KT, 128MB + 128MB, SC#0
NGDIMM#2 part# 501-5401-03 serial# B0L0L0, 128MB + 128MB, SC#0
NGDIMM#3 part# 501-5401-03 serial# B0L0K2, 128MB + 128MB, SC#0
NGDIMM#4 part# 501-5401-03 serial# B0L0KV, 128MB + 128MB, SC#0
NGDIMM#5 part# 501-5401-03 serial# B0L0KP, 128MB + 128MB, SC#0
NGDIMM#6 part# 501-5401-03 serial# B0L0K1, 128MB + 128MB, SC#0
NGDIMM#7 part# 501-5401-03 serial# B0L0JY, 128MB + 128MB, SC#0
Probing CPU2 memory configuration
NGDIMM#0 part# 501-5401-03 serial# B0L0KX, 128MB + 128MB, SC#0
NGDIMM#1 part# 501-5401-03 serial# B0L0L3, 128MB + 128MB, SC#0
NGDIMM#2 part# 501-5401-03 serial# B0L0JZ, 128MB + 128MB, SC#0
NGDIMM#3 part# 501-5401-03 serial# B0L0K0, 128MB + 128MB, SC#0
NGDIMM#4 part# 501-5401-03 serial# B0L0JX, 128MB + 128MB, SC#0
NGDIMM#5 part# 501-5401-03 serial# B0L0KS, 128MB + 128MB, SC#0
NGDIMM#6 part# 501-5401-03 serial# B0L0K4, 128MB + 128MB, SC#0
NGDIMM#7 part# 501-5401-03 serial# B0L0KR, 128MB + 128MB, SC#0
Mungeing Memory...........Done
HiMem: 0000.00a0.c000.0000, size: 0000.0000.2000.0000
Configuring Memory........ CPU0 CPU2 Done
Init ICache/etc........... CPU0 CPU2 Done
Init ECache Tags.......... CPU0 CPU2 Done
Clearing TLBs............. CPU0 CPU2 Done
Setup I/DTLBs............. CPU0 CPU2 Done
Enabling Cache/MMUs....... CPU0 CPU2 Done
Init ECache Data.......... CPU0 CPU2 Done
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 96KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.9604.976f; ROM CRC = 0000.0000.9604.976f
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.0b30 (451KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot CPU2 starting Forth at 0000.0000.f000.00e0
ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
memory-controller
Probing gptwo at 1,0 Nothing there
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
memory-controller
Probing gptwo at 3,0 Nothing there
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device
SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru nvram idprom fru
fru i2c temperature temperature ioexp ioexp ioexp ioexp ioexp ioexp
ioexp temperature-sensor fru fru fru fru fru rscrtc rtc gpio pmc
rsc-control rsc-console serial
Memory Configuration:
CPU0 Bank0 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #0
CPU0 Bank1 128 + 128 + 128 + 128 : 512MB @ a0c0000000
CPU0 Bank2 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #2
CPU0 Bank3 128 + 128 + 128 + 128 : Not in Use [Failed POST diagnostics]
CPU2 Bank0 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #1
CPU2 Bank1 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #0
CPU2 Bank2 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #3
CPU2 Bank3 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #1
Probing /pci@8,600000 Device 1 Nothing there
Probing /pci@8,600000 Device 2 Nothing there
Probing /pci@8,700000 Device 2 SUNW,m64B
Probing /pci@8,700000 Device 3 pci
Probing /pci@8,700000/pci@3 Device 0 Nothing there
Probing /pci@8,700000/pci@3 Device 1 Nothing there
Probing /pci@8,700000/pci@3 Device 2 Nothing there
Probing /pci@8,700000/pci@3 Device 3 Nothing there
Probing /pci@8,700000/pci@3 Device 4 scsi sd st
Probing /pci@8,700000/pci@3 Device 5 scsi sd st
Probing /pci@8,700000/pci@3 Device 6 Nothing there
Probing /pci@8,700000/pci@3 Device 7 Nothing there
Probing /pci@8,700000/pci@3 Device 8 Nothing there
Probing /pci@8,700000/pci@3 Device 9 Nothing there
Probing /pci@8,700000/pci@3 Device a Nothing there
Probing /pci@8,700000/pci@3 Device b Nothing there
Probing /pci@8,700000/pci@3 Device c Nothing there
Probing /pci@8,700000/pci@3 Device d Nothing there
Probing /pci@8,700000/pci@3 Device e Nothing there
Probing /pci@8,700000/pci@3 Device f Nothing there
Probing /pci@8,700000 Device 4 Nothing there
Probing /pci@8,700000 Device 5 Nothing there
Probing /pci@8,700000 Device 6 ide disk cdrom
Probing /pci@9,600000 Device 1 network
Probing /pci@9,600000 Device 2 SUNW,qlc fp disk
Probing /pci@9,700000 Device 1 usb keyboard mouse
Probing /pci@9,700000 Device 2 network
Sun Fire 480R, Keyboard Present
Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.10.8, 3584 MB memory installed, Serial #53270222.
Ethernet address 0:3:ba:2c:d6:ce, Host ID: 832cd6ce.
Creating CPU memory layout properties.
Running diagnostic script obdiag/normal
Testing /pci@9,600000/SUNW,qlc@2
Testing /pci@9,700000/ebus@1/i2c@1,2e
Testing /pci@9,700000/ebus@1/i2c@1,30
Testing /pci@9,700000/ebus@1/bbc@1,0
Testing /pci@9,700000/ebus@1
Testing /pci@9,600000/network@1
Testing /pci@9,700000/network@2
Testing /pci@9,700000/usb@1,3
Testing /pci@9,700000/ebus@1/pmc@1,300700
Testing /pci@9,700000/ebus@1/rtc@1,300070
Initializing 12MB of memory at addr a0df000000 -
Initializing 3568MB of memory at addr a000000000 -
Reading temperature limits from FRUPROMs: CPU0/2 BACKPLANE
Environmental monitor is ON
ERROR: Power On Self Test Failed. Cause:
CPU0 Bank 3 Dimm 2, J3201 side 2
ERROR: POST failed.
Rebooting with command: boot cdrom
Resetting ...
<*>;
Firmware I/O Diagnostics Reset
@(#)OBP 4.10.8 2003/07/25 08:44 Sun Fire 480R
Front Panel Keyswitch is in Diagnostic position.
Online: CPU0 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Online: *CPU2 Ultra-III+ (v2.3) 6:1 900MHz 8MB 3:1 ECache
Enabling Safari .......... CPU0 CPU2 Done
Init ICache/etc........... CPU0 CPU2 Done
Init ECache Tags.......... CPU0 CPU2 Done
Clearing TLBs............. CPU0 CPU2 Done
Setup I/DTLBs............. CPU0 CPU2 Done
Enabling Cache/MMUs....... CPU0 CPU2 Done
Init ECache Data.......... CPU0 CPU2 Done
Zeroing memory...Done
Copying FLASHRAM to memory...Verifying base 96KB...Done
Jumping into RAM (leaving slave CPUs in ROM)
RAM CRC = 0000.0000.9604.976f; ROM CRC = 0000.0000.9604.976f
Dropping in...
Find dropin, Decompressing Done, Size 0000.0000.0007.0b30 (451KB)
Slave CPUs starting Forth at 0000.0000.f000.00e0
Boot CPU2 starting Forth at 0000.0000.f000.00e0
ttya initialized
Probing gptwo at 0,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
memory-controller
Probing gptwo at 1,0 Nothing there
Probing gptwo at 2,0 SUNW,UltraSPARC-III+ (900 MHz @ 6:1, 8 MB)
memory-controller
Probing gptwo at 3,0 Nothing there
Probing gptwo at 4,0 Nothing there
Probing gptwo at 5,0 Nothing there
Probing gptwo at 6,0 Nothing there
Probing gptwo at 7,0 Nothing there
Probing gptwo at 8,0 pci pci
Probing gptwo at 9,0 pci pci
Loading Support Packages: obp-tftp kbd-translator SUNW,i2c-ram-device
SUNW,fru-device
Loading onboard drivers: ebus flashprom bbc power i2c fru fru fru fru
fru fru fru fru fru fru fru fru fru fru fru fru fru nvram idprom fru
fru i2c temperature temperature ioexp ioexp ioexp ioexp ioexp ioexp
ioexp temperature-sensor fru fru fru fru fru rscrtc rtc gpio pmc
rsc-control rsc-console serial
Memory Configuration:
CPU0 Bank0 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #0
CPU0 Bank1 128 + 128 + 128 + 128 : 512MB @ a0c0000000
CPU0 Bank2 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #2
CPU0 Bank3 128 + 128 + 128 + 128 : Not in Use [Failed POST diagnostics]
CPU2 Bank0 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #1
CPU2 Bank1 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #0
CPU2 Bank2 128 + 128 + 128 + 128 : 512MB @ a000000000 4-way #3
CPU2 Bank3 128 + 128 + 128 + 128 : 512MB @ a080000000 2-way #1
Probing /pci@8,600000 Device 1 Nothing there
Probing /pci@8,600000 Device 2 Nothing there
Probing /pci@8,700000 Device 2 SUNW,m64B
Probing /pci@8,700000 Device 3 pci
Probing /pci@8,700000/pci@3 Device 0 Nothing there
Probing /pci@8,700000/pci@3 Device 1 Nothing there
Probing /pci@8,700000/pci@3 Device 2 Nothing there
Probing /pci@8,700000/pci@3 Device 3 Nothing there
Probing /pci@8,700000/pci@3 Device 4 scsi sd st
Probing /pci@8,700000/pci@3 Device 5 scsi sd st
Probing /pci@8,700000/pci@3 Device 6 Nothing there
Probing /pci@8,700000/pci@3 Device 7 Nothing there
Probing /pci@8,700000/pci@3 Device 8 Nothing there
Probing /pci@8,700000/pci@3 Device 9 Nothing there
Probing /pci@8,700000/pci@3 Device a Nothing there
Probing /pci@8,700000/pci@3 Device b Nothing there
Probing /pci@8,700000/pci@3 Device c Nothing there
Probing /pci@8,700000/pci@3 Device d Nothing there
Probing /pci@8,700000/pci@3 Device e Nothing there
Probing /pci@8,700000/pci@3 Device f Nothing there
Probing /pci@8,700000 Device 4 Nothing there
Probing /pci@8,700000 Device 5 Nothing there
Probing /pci@8,700000 Device 6 ide disk cdrom
Probing /pci@9,600000 Device 1 network
Probing /pci@9,600000 Device 2 SUNW,qlc fp disk
Probing /pci@9,700000 Device 1 usb keyboard mouse
Probing /pci@9,700000 Device 2 network
好像也没什么吖！？ |
|
免费注册
发表于 2004-06-02 13:22
发表于 2004-06-02 13:57
